Archeage

ArcheAge, an MMORPG from 2014, presents an interesting performance profile when paired with the AMD Ryzen 5 7600X and the NVIDIA GeForce RTX 5090 D. The benchmark data reveals that this combination is capable of very high frame rates, but the scaling across settings and resolutions is not always linear, suggesting a complex interaction between the game's engine, the CPU, and the GPU. This analysis examines the measured results to provide a detailed breakdown of what users can expect from this specific hardware pairing.

Settings Recommendations

The measured data offers a clear picture of how each graphics preset impacts performance at various resolutions. For players targeting the highest possible frame rates, the Low preset delivers the best performance, reaching an average of 275 FPS at 1080p, 219 FPS at 1440p, and 125 FPS at 4K. These are substantial frame rates that would fully utilize high-refresh-rate monitors. However, the jump from Low to Medium is significant in terms of visual quality, and the performance cost is relatively modest, making Low a less compelling choice for most scenarios.

The Medium preset appears to be the sweet spot for a balanced experience. At 1080p, it averages 264 FPS, which is only 11 FPS lower than the Low preset. At 1440p, the Medium preset still delivers a very impressive 195 FPS, and even at 4K, it maintains a playable 112 FPS with a minimum of 95 FPS. This suggests that the Medium preset offers a substantial visual upgrade over Low while incurring a minimal performance penalty, making it the recommended starting point for most users.

For those with high-refresh-rate 1440p monitors, the High preset is also a strong contender, with an average of 132 FPS. This is a significant drop from the Medium preset's 195 FPS, but it still provides a smooth experience. At 1080p, High averages 197 FPS, which is still excellent. The data suggests that High is the best choice for users who prioritize visual fidelity over raw frame rates, especially at 1080p and 1440p.

The Ultra preset, while offering the highest visual quality, comes with a steep performance cost. At 1080p, the average FPS drops to 134, which is nearly half of the Medium preset's score. At 1440p, it falls to 90 FPS, and at 4K, it averages just 52 FPS. This makes Ultra impractical for competitive play or high refresh rate displays, particularly at higher resolutions. The data clearly indicates that the Ultra preset is best reserved for slower-paced, visually focused gameplay or for taking screenshots, as it demands a significant performance trade-off.

Based on the measured data, the Medium preset offers the best balance of visual quality and performance across all resolutions. It provides a high enough frame rate for smooth gameplay even at 4K, while the performance drop from Low is minimal. For users with 1080p or 1440p displays, the High preset is also highly recommended for a more detailed image.

GPU Role

The NVIDIA GeForce RTX 5090 D is a formidable piece of hardware, and its role in this game is clear from the data. The GPU is equipped with 32 GB of GDDR7 memory on a 512-bit bus, providing a massive 1.79 TB/s of bandwidth. This is a substantial amount of memory bandwidth, which is often a critical factor in high-resolution gaming. The card's base clock is 2017 MHz, with a boost clock of 2407 MHz.

The benchmark results suggest that the RTX 5090 D is more than capable of handling ArcheAge at high settings. The most telling observation is the performance scaling at 4K. The drop from Low (125 FPS) to Medium (112 FPS) is a relatively small 13 FPS, and the drop to High (76 FPS) is more significant. This pattern can be attributed to the GPU's immense raw power and memory bandwidth. At 4K, the GPU is being heavily utilized, but it still has enough headroom to handle the increased load of the Medium preset without a catastrophic frame rate drop.

However, the data also hints that the GPU is not always the primary bottleneck. At 1080p, the difference between Low (275 FPS) and Medium (264 FPS) is just 11 FPS, suggesting that the CPU may be limiting performance in these scenarios, as the GPU is not being fully stressed. The RTX 5090 D's performance in this game is exceptional, but its full potential is only realized at higher resolutions where the GPU becomes the limiting factor. The card's 92nd percentile ranking among all GPUs in the database underscores its high-end positioning.

FAQ

Q: What is the best resolution to play ArcheAge with this hardware for a competitive edge?

A: For the highest possible frame rates, the data shows that playing at 1920x1080 with the Low preset yields an average of 275 FPS. For a more balanced approach, 2560x1440 on Medium still provides a very high 195 FPS average.

Q: Can this system run ArcheAge at 4K smoothly?

A: Yes, it can. The measured data shows an average of 112 FPS at 4K on the Medium preset, with a minimum of 95 FPS. Even the High preset is playable at 4K, with an average of 76 FPS.

Q: How much of a performance hit is the Ultra preset?

A: The Ultra preset incurs a significant performance penalty. At 4K, it averages only 52 FPS, which is less than half of the Medium preset's 112 FPS. At 1080p, it drops to 134 FPS from 264 FPS on Medium.

Q: Is the RTX 5090 D being fully utilized at 1080p?

A: The data suggests that it is not. The small performance difference between Low (275 FPS) and Medium (264 FPS) at 1080p implies that the CPU is likely the limiting factor, as the GPU has ample headroom to render more frames.

Q: What is the lowest frame rate recorded for this combo?

A: The lowest average FPS recorded is 52 FPS, which occurs at 3840x2160 resolution with the Ultra settings preset.

Q: How does this hardware compare to its close rivals in synthetic benchmarks?

A: The CPU has an average benchmark score of 27636, which is 0.2% higher than the AMD Ryzen 7 5700X and Intel Core i5-12600K. The GPU's average score of 77712 is 1.1% higher than the AMD Radeon RX 6650M XT.

How This Combo Ranks

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 5090 D combination ranks 30th out of 3708 tested combos for this game. This top 1% ranking indicates that this is an exceptionally high-performing setup for ArcheAge. The data shows that this rank is earned by delivering very high average frame rates across all tested resolutions and settings.

This rank is particularly impressive given the game's age, as it suggests that the combination is not just adequate but is in the upper echelon of all possible systems. The ranking implies that very few other hardware configurations can outperform this one in ArcheAge. The combination of a strong, modern CPU and a top-tier GPU ensures that the game is rarely bottlenecked, allowing for maximum frame rates. The 30th position out of thousands of combinations solidifies this pairing as a top-tier choice for this specific MMORPG.

CPU Role

The AMD Ryzen 5 7600X, a Zen 4 architecture processor, plays a crucial role in this benchmark, especially at lower resolutions. With 6 cores and 12 threads, it has a base clock of 4.70 GHz and a boost clock of 5.30 GHz. Its benchmark data shows a strong single-thread performance, with a 3DMark single-thread score of 1060 and a Cinebench R23 single-core score of 1965.

ArcheAge, being an older MMORPG, often relies heavily on single-core performance for game logic and draw calls. The data supports this. At 1080p, the frame rates are exceptionally high, but the scaling between Low, Medium, and High settings is not proportional to the GPU's capabilities. This points to a CPU bottleneck. For instance, the difference between Low and Medium at 1080p is only 11 FPS, while the same settings difference at 4K is 13 FPS. This suggests that the CPU is reaching its limit in processing the game's logic and is unable to feed the GPU with enough frames to show a larger difference at 1080p.

The Ryzen 5 7600X's high boost clock and strong single-thread performance are what allow it to achieve frame rates like 275 FPS at 1080p. However, as resolution increases, the load shifts to the GPU, and the CPU's influence on the final frame rate diminishes. The data shows that the CPU is a significant contributor to the system's high ranking, but it is also the limiting factor at 1080p, preventing the RTX 5090 D from reaching its maximum potential in this specific game.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system's performance. At 1920x1080, the average FPS is 275 on Low, 264 on Medium, 197 on High, and 134 on Ultra. The Medium preset also shows a minimum of 224 FPS and a maximum of 304 FPS, indicating a very stable experience.

Moving to 2560x1440, the average FPS is 219 on Low, 195 on Medium, 132 on High, and 90 on Ultra. The Medium preset again shows strong stability with a minimum of 166 FPS and a maximum of 224 FPS. At 3840x2160, the average FPS is 125 on Low, 112 on Medium, 76 on High, and 52 on Ultra. The Medium preset at 4K is the most demanding setting with a recorded minimum, showing a minimum of 95 FPS and a maximum of 128 FPS.

The data shows a clear and consistent pattern: performance decreases as resolution and settings increase. The most interesting observation is the relatively small performance gap between Low and Medium settings at all resolutions, which contrasts with the large gap between Medium and High, and High and Ultra. This suggests that the Medium preset is a highly efficient point in the visual fidelity to performance curve. The Ultra preset's performance is consistently low, confirming its status as a demanding, non-competitive setting for this configuration.

Resolution Scaling

The data reveals a predictable but informative trend in how the frame rate scales from 1080p to 4K. At the Low setting, the average FPS drops from 275 at 1080p to 219 at 1440p, and then to 125 at 4K. This represents a 20% drop from 1080p to 1440p, and a 43% drop from 1440p to 4K. This scaling indicates that the GPU is starting to become a more significant factor at 4K, but the CPU still plays a large role at lower resolutions.

At the Medium setting, the frame rate drops from 264 at 1080p to 195 at 1440p (a 26% drop), and then to 112 at 4K (a 43% drop from 1440p). This similar percentage drop from 1440p to 4K at both Low and Medium settings suggests that the GPU is becoming the primary bottleneck in this resolution range, and its performance scaling is consistent. The High setting shows a steeper decline: 197 FPS at 1080p to 132 FPS at 1440p (a 33% drop) and then to 76 FPS at 4K (a 42% drop from 1440p).

The scaling pattern indicates that at 1080p, the CPU is the limiting component, as the GPU has significant headroom. As the resolution increases to 1440p and 4K, the GPU becomes more heavily utilized, and the frame rate drops become more substantial. The fact that the percentage drop from 1440p to 4K is similar across all settings (around 42-43%) for Low, Medium, and High suggests that this is a pure GPU scaling limit. However, the Ultra preset, with its 52 FPS at 4K, shows a 42% drop from its 1440p score of 90 FPS, indicating that the GPU is completely saturated at this setting. The data suggests that a user targeting 4K should be prepared for a significant frame rate reduction compared to 1440p, regardless of the settings chosen.