Archeage

The AMD Ryzen 5 7600X and AMD Radeon RX 7700 combination delivers a highly resolution-sensitive experience in Archeage. The measured frame rates show a clear transition from a CPU-limited state at 1080p to a GPU-bound state at 4K, with the scaling pattern indicating that the system’s performance ceiling shifts depending on the preset and resolution selected. This analysis breaks down the measured data to interpret what the numbers mean for gameplay across the three tested resolutions.

Resolution Scaling

The data reveals a steep performance gradient as resolution increases from 1920x1080 to 3840x2160. At 1080p with Low settings, the system produces 162 FPS average, which drops to 109 FPS at 1440p and further to 62 FPS at 4K. This represents a 33% reduction from 1080p to 1440p, followed by a 43% reduction from 1440p to 4K. The scaling pattern suggests that at 1080p, the CPU is the primary limiting factor, as the frame rate does not increase proportionally with the reduced pixel count compared to higher resolutions.

Looking at High settings, the progression is 98 FPS at 1080p, 66 FPS at 1440p, and 38 FPS at 4K. The drop from 1080p to 1440p is 33%, and from 1440p to 4K is 42%. This consistent scaling pattern across settings indicates that the GPU workload scales predictably with pixel count, but the 1080p results are capped by the CPU’s ability to feed the graphics card. The 162 FPS Low setting at 1080p versus 98 FPS High at the same resolution shows that the CPU can push significantly higher frame rates when the GPU workload is light, but the ceiling appears to be around 160 FPS given the 6-core, 12-thread configuration.

Ultra settings present the most dramatic scaling: 67 FPS at 1080p, 45 FPS at 1440p, and 26 FPS at 4K. The 1080p Ultra result is notably lower than the 1440p High result (67 vs 66 FPS), which suggests that at Ultra settings, the GPU becomes the bottleneck even at 1080p due to the increased shading and texture demands. The 4K Ultra result of 26 FPS is barely playable, indicating that this combination is not suited for maximum quality at the highest resolution.

The limiting component analysis is clear: at 1080p with Low and Medium settings, the CPU is the bottleneck, as evidenced by the 162 and 144 FPS results respectively. At 4K across all settings, the GPU is the bottleneck, with the RX 7700’s 16 GB GDDR6 memory and 624.1 GB/s bandwidth being insufficient to maintain high frame rates at 3840x2160. The transition point appears to be around 1440p, where both components share the load more evenly.

CPU Role

The AMD Ryzen 5 7600X features 6 cores and 12 threads, with a base clock of 4.70 GHz and a boost clock of 5.30 GHz. This Zen 4 architecture processor, built on a 5 nm process, has a 32 MB shared L3 cache and supports DDR5 memory with dual-channel configuration. The CPU’s benchmark scores show strong single-thread performance, with a 3dmark single-thread score of 1060 and a cinebench r23 single-core score of 1965. These results position the 7600X well above its nearest rivals, including the AMD Ryzen 7 5700X and Intel Core i5-12600K, both of which have an average score of 27578 compared to the 7600X’s 27636, representing a 0.2% delta.

In Archeage, the CPU’s single-thread performance is critical for MMORPG gameplay, where game logic, NPC AI, and network processing often rely on a limited number of threads. The measured 1080p Low result of 162 FPS demonstrates that the CPU can handle the game’s single-threaded workload efficiently when the GPU is not constrained. The 3dmark 2-thread score of 2028 and 4-thread score of 3796 indicate scaling up to 4 threads, but the 8-thread score of 5715 and max-thread score of 6845 show diminishing returns beyond 4 threads, which is typical for MMORPGs.

The 7600X’s 79th percentile ranking among all CPUs suggests it is a capable processor for this genre, but the data shows that Archeage does not fully utilize the 12 threads available. The cinebench r23 multicore score of 15236 is significantly higher than the single-core score of 1965, indicating the CPU has substantial multi-threaded capability, but the game appears to be limited by single-thread performance. The passmark single-thread score of 4135 and multithread score of 28390 further confirm this pattern.

The CPU’s TDP of 105 W and 5 nm process node contribute to its efficiency, but these factors do not directly impact gameplay performance. The 83.2 GB/s memory bandwidth and DDR5 support provide sufficient memory throughput for the game’s data streaming needs. The data suggests that for Archeage, the 7600X provides adequate headroom for 1080p and 1440p gameplay, but the 4K results are not limited by CPU performance, as evidenced by the similar frame rate drops across all settings at that resolution.

GPU Role

The AMD Radeon RX 7700 features 16 GB of GDDR6 memory on a 256-bit bus, providing 624.1 GB/s of bandwidth. The GPU operates at a base clock of 1900 MHz, with a game clock of 2041 MHz and a boost clock of 2459 MHz. Built on the RDNA 3.0 architecture with Navi 32 chip, the RX 7700 has 2560 shading units, 160 TMUs, and 96 ROPs. The GPU’s passmark g3d score of 20974 places it in the 58th percentile among all GPUs, but its nearest rivals include the AMD Radeon R9 370X and AMD Radeon RX 9060, with the RX 7700 being 0.1% slower than the R9 370X and 1% faster than the RX 9060.

In Archeage, the GPU’s role becomes increasingly important as resolution increases. The measured data shows that at 4K, the GPU is the limiting factor across all settings. The RX 7700’s 16 GB VRAM is sufficient for the game’s textures, but the 624.1 GB/s bandwidth may not be adequate for 4K Ultra settings, which produce only 26 FPS. The GPU’s 3dmark steel nomad dx12 score of 2865 indicates moderate performance in modern DirectX 12 workloads, but Archeage’s engine appears to be more demanding on raw shading and texture processing.

The GPU’s pixel rate of 236.1 GPixel/s and texture rate of 393.4 GTexel/s provide context for its performance scaling. At 1080p Low, the GPU is underutilized, as evidenced by the 162 FPS result, but at 4K Ultra, the GPU is saturated, producing only 26 FPS. The 25.18 TFLOPS FP32 performance is the theoretical peak, but real-world gaming performance is limited by memory bandwidth and ROP throughput, particularly at higher resolutions.

The RX 7700’s 200 W TDP and PCIe 4.0 x16 interface are standard for this class, but the data shows that the GPU’s performance in Archeage is below what the raw specs might suggest. The 4K Medium result of 55 FPS with a minimum of 47 FPS and maximum of 64 FPS shows significant frame time variance, indicating that the GPU is struggling to maintain consistent performance. The 1440p Medium result of 97 FPS with a minimum of 82 FPS and maximum of 111 FPS shows better consistency, but still exhibits a 30% variance between minimum and maximum frame rates.

How This Combo Ranks

The AMD Ryzen 5 7600X and AMD Radeon RX 7700 combination ranks 1276 out of 2761 tested combos in Archeage. This places the combo in the 46th percentile, meaning that approximately 54% of tested combinations perform better. This ranking is notable given that the CPU ranks in the 79th percentile and the GPU ranks in the 58th percentile individually, suggesting that the combination does not achieve the synergistic performance that the individual component rankings might imply.

The ranking suggests that Archeage is particularly demanding on the specific combination of CPU and GPU capabilities. The CPU’s strong single-thread performance (3dmark single-thread score of 1060) is beneficial, but the GPU’s moderate performance (passmark g3d score of 20974) holds back the overall combination. The combo rank of 1276 out of 2761 indicates that there are 1485 combinations that perform better, which is a significant number given the 6-core CPU and 16 GB GPU.

The nearest rival comparisons provide context for this ranking. The CPU’s nearest rival, the AMD Ryzen 7 5700X, has an average score of 27578, which is 0.2% lower than the 7600X’s 27636. Similarly, the GPU’s nearest rival, the AMD Radeon R9 370X, has an average score of 15862, which is 0.1% lower than the RX 7700’s 15852. These minimal differences suggest that the combo’s ranking is determined more by the game’s specific requirements than by the components’ absolute performance.

The measured FPS data shows that the combo achieves playable frame rates (above 60 FPS) at 1080p for all settings except Ultra (67 FPS), and at 1440p for Low (109 FPS) and Medium (97 FPS) settings. At 4K, only Low settings achieve 62 FPS, which is marginally above the playable threshold. This performance profile places the combo in a mid-range position, capable of handling the game at moderate settings but not at maximum quality.

Settings Recommendations

Based on the measured data, the optimal settings for this combination depend on the target resolution and desired frame rate. At 1920x1080, the Medium preset provides the best balance of visual quality and performance, with 144 FPS average and a minimum of 122 FPS. This represents a 47% improvement over the Ultra preset’s 67 FPS while maintaining a minimum frame rate well above the 60 FPS threshold. The High preset at 98 FPS is also viable, but the Medium preset offers a 46 FPS advantage over High with what is likely a minimal visual difference.

At 2560x1440, the Medium preset is the clear recommendation, with 97 FPS average and a minimum of 82 FPS. This is the only preset at this resolution that maintains a minimum frame rate above 80 FPS, which is important for consistent gameplay in an MMORPG where frame time spikes can affect combat responsiveness. The Low preset at 109 FPS is also playable, but the Medium preset provides substantially better visual quality for only a 12 FPS reduction. The High preset at 66 FPS is borderline, and the Ultra preset at 45 FPS is not recommended.

At 3840x2160, the Low preset at 62 FPS is the only playable option, but even this is marginal. The Medium preset at 55 FPS with a minimum of 47 FPS shows significant frame drops that could affect gameplay. For 4K users, the recommendation is to either accept Low settings for playable performance or consider lowering the resolution to 1440p for a better experience. The Ultra preset at 26 FPS is not viable for any gameplay scenario.

The data indicates that the Medium preset is the sweet spot for this combination across all resolutions, providing the best frame rate consistency as evidenced by the minimum FPS measurements. The 1080p Medium result of 144 FPS with a 122 FPS minimum shows excellent consistency, while the 1440p Medium result of 97 FPS with an 82 FPS minimum is also stable. The 4K Medium result of 55 FPS with a 47 FPS minimum is the weakest Medium performance but still better than High or Ultra at that resolution.

Measured FPS Breakdown

At 1920x1080, the measured frame rates are as follows: Low settings produce 162 FPS average, Medium settings produce 144 FPS average with a minimum of 122 FPS and maximum of 166 FPS, High settings produce 98 FPS average, and Ultra settings produce 67 FPS average. The progression from Low to Ultra shows a 59% reduction in average FPS, with the most significant drop occurring between High and Ultra (31 FPS). The Medium preset’s minimum frame rate of 122 FPS is 85% of its average, indicating good consistency.

At 2560x1440, the measured frame rates are: Low settings produce 109 FPS average, Medium settings produce 97 FPS average with a minimum of 82 FPS and maximum of 111 FPS, High settings produce 66 FPS average, and Ultra settings produce 45 FPS average. The drop from Low to Ultra is 59%, matching the 1080p scaling. The Medium preset’s minimum frame rate of 82 FPS is 85% of its average, again showing good consistency. The High preset at 66 FPS is 32% lower than Medium, which is a more significant drop than at 1080p.

At 3840x2160, the measured frame rates are: Low settings produce 62 FPS average, Medium settings produce 55 FPS average with a minimum of 47 FPS and maximum of 64 FPS, High settings produce 38 FPS average, and Ultra settings produce 26 FPS average. The scaling from Low to Ultra is 58%, similar to other resolutions, but the absolute values are much lower. The Medium preset’s minimum frame rate of 47 FPS is 85% of its average, but this is below the 60 FPS threshold for smooth gameplay. The gap between Medium and High at 4K is 17 FPS, while at 1440p the same gap is 31 FPS, indicating that the GPU becomes more sensitive to settings at higher resolutions.

The data shows a consistent pattern: Medium settings provide the best frame rate consistency across all resolutions, with the minimum FPS being consistently 85% of the average. The High preset at 4K (38 FPS) is nearly identical to the Ultra preset at 1440p (45 FPS), suggesting that the GPU’s performance ceiling is around 45-50 FPS for demanding settings. The Low preset at 1080p (162 FPS) represents the absolute performance ceiling for this combination, which is likely limited by the CPU’s single-thread performance.

FAQ

Q: What is the best preset for 1080p gaming with this combination?

A: The Medium preset at 1920x1080 provides 144 FPS average with a minimum of 122 FPS. This is 47% higher than the High preset’s 98 FPS and maintains a minimum frame rate well above the 60 FPS threshold, making it the best choice for consistent performance.

Q: Can this combination handle 4K gaming in Archeage?

A: At 3840x2160, only the Low preset achieves playable performance at 62 FPS average. The Medium preset produces 55 FPS with a minimum of 47 FPS, which may cause noticeable stuttering. The High and Ultra presets are not playable at 38 FPS and 26 FPS respectively.

Q: Is the CPU or GPU the bottleneck at 1440p?

A: The measured data suggests that at 1440p, the system is balanced. The Low preset produces 109 FPS, which is 67% of the 1080p Low result, indicating that the GPU is starting to become a limiting factor. However, the Medium preset at 97 FPS shows that the CPU can still feed the GPU effectively at this resolution.

Q: How does this combination compare to similar setups in the benchmark database?

A: This combination ranks 1276 out of 2761 tested combos in Archeage, placing it in the 46th percentile. The CPU ranks in the 79th percentile and the GPU ranks in the 58th percentile individually, suggesting that the combination performs below what the individual component rankings might suggest.

Q: What is the expected frame rate for the Ultra preset at 1440p?

A: The Ultra preset at 2560x1440 produces 45 FPS average. This is significantly lower than the Medium preset’s 97 FPS, representing a 54% reduction. The Ultra preset is not recommended for this resolution due to the sub-60 FPS performance.

Q: Does the 16 GB VRAM on the RX 7700 help in Archeage?

A: The 16 GB GDDR6 memory with 624.1 GB/s bandwidth is sufficient for the game’s texture requirements, as evidenced by the 4K Medium result of 55 FPS. However, the 4K Ultra result of 26 FPS suggests that VRAM capacity is not the limiting factor; rather, the GPU’s shading and ROP throughput are insufficient for maximum quality at 4K.