Archeage

Archeage, the 2014 MMORPG, remains a demanding title for modern hardware, and the combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 produces a distinct performance profile across resolutions and settings. The measured data reveals a system that is overwhelmingly GPU-limited at higher resolutions, while at 1080p, the CPU begins to play a more significant role in defining the frame rate ceiling. This analysis breaks down the benchmark results to show exactly where this combo excels and where its limitations become apparent.

Resolution Scaling

The frame rate data shows a classic scaling curve that transitions from a CPU-bound scenario at 1080p to a heavily GPU-bound scenario at 4K. At High settings, the average frame rate drops from 136 FPS at 1920x1080 to 92 FPS at 2560x1440, a reduction of 44 FPS. Moving up to 3840x2160, the average falls further to 52 FPS. This represents a 61.8% decrease in performance from 1080p to 4K, indicating that the graphics card is being pushed to its absolute limits at the highest resolution.

The scaling pattern under Low settings is even more revealing about the system's bottleneck. At 1920x1080 Low, the combo achieves an average of 225 FPS. At 2560x1440 Low, this drops to 151 FPS, and at 4K Low, it settles at 87 FPS. The significant drop from 1080p to 1440p (74 FPS) suggests that even at low graphical fidelity, the GPU is still the primary constraint at higher resolutions. The fact that the 1080p Low result (225 FPS) is substantially higher than the 1440p Low result (151 FPS) indicates that the CPU can feed the GPU enough frames at the lower resolution, but the GPU's rendering workload becomes the limiting factor as pixel count increases.

The most telling data point for bottleneck analysis comes from comparing the Low and Ultra presets at each resolution. At 1080p, the gap between Low (225 FPS) and Ultra (93 FPS) is a massive 132 FPS, showing that the GPU is capable of producing very high frame rates when the workload is light, and the CPU is not holding it back. However, at 4K, the gap narrows to 51 FPS (87 FPS Low vs 36 FPS Ultra). This compressed range at 4K confirms that the RTX 5070 is the definitive limiting component at that resolution, as the frame rate is far more sensitive to the GPU's rendering workload than the CPU's ability to issue draw calls.

Settings Recommendations

The measured rows provide a clear hierarchy for the best experience. The Medium preset appears to be the sweet spot for this hardware configuration, offering a balance between visual fidelity and performance that avoids the extremes of the other presets. At 1920x1080 Medium, the combo delivers a strong average of 200 FPS with a minimum of 170 FPS and a maximum of 230 FPS. This is a significant improvement over the High preset's 136 FPS average, and it comes with only a modest reduction in visual quality.

At 2560x1440, the Medium preset remains highly playable, with an average of 135 FPS and a minimum of 115 FPS. This is a comfortable margin above the 60 FPS threshold and provides a smooth experience for an MMORPG. The High preset at this resolution yields 92 FPS, which is still playable but offers less headroom for demanding scenes with many players or effects. The data suggests that Medium at 1440p is the optimal choice, as the performance penalty for High is substantial (43 FPS) relative to the visual gains.

For 4K gaming, the Medium preset is the highest playable option, with an average of 77 FPS and a minimum of 66 FPS. The High preset drops to 52 FPS, which is borderline for a smooth experience, and the Ultra preset falls to an unplayable 36 FPS. The Low preset at 4K averages 87 FPS, but this requires sacrificing most graphical features. Therefore, the Medium preset at 3840x2160 provides the best balance, keeping the frame rate above 60 FPS for the majority of the time while retaining a reasonable level of visual detail. The Ultra preset is not recommended at any resolution due to its substantial performance cost, making it the least efficient choice for this hardware.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture (codenamed Raphael) using a 5 nm process. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz. In synthetic benchmarks, it posts a Cinebench R23 multi-core score of 21765 and a single-core score of 3072, placing it in the 83rd percentile of all CPUs. Its average benchmark score of 32750 puts it in close competition with the Intel Core i5-14600T, which scores 32707 (a 0.1% delta), and the AMD Ryzen 7 PRO 6850H, which scores 32812 (a -0.2% delta).

In the context of Archeage, the CPU's role is most apparent at 1080p. The game is an MMORPG from 2014, which often has a single-threaded bottleneck for game logic and draw calls. The Ryzen 5 7400F's strong single-core performance, evidenced by its 3072-point Cinebench R23 score, is sufficient to drive the RTX 5070 to high frame rates at this resolution. The 225 FPS average at 1080p Low indicates that the CPU is not the limiting factor at this setting. However, the fact that the frame rate does not scale perfectly from Low to Ultra at 1080p (225 FPS to 93 FPS) shows that the GPU's workload is still the dominant factor even at lower resolutions.

The 12 threads and 32 MB of shared L3 cache are adequate for the game's multi-threaded rendering tasks and background processes. The data shows that the CPU is not a bottleneck until the frame rate approaches the 200 FPS range. At 1080p Low, the system hits 225 FPS, which is near the practical limit for many games. At 1080p Medium, the average is 200 FPS, with a maximum of 230 FPS, suggesting that the CPU is starting to reach its limit. This is confirmed by the fact that the 1440p Low result (151 FPS) is significantly lower than the 1080p Low result (225 FPS), meaning the GPU is not powerful enough to maintain the same frame rate at higher resolutions, but the CPU is also not the primary constraint at those resolutions.

How This Combo Ranks

Within the benchmark database, this specific combination of the AMD Ryzen 5 7400F and the NVIDIA GeForce RTX 5070 ranks 536th out of 2761 total tested combos for Archeage. This places it in the top 19.4% of all configurations tested, indicating a strong overall performance level. The high rank is primarily driven by the RTX 5070's capabilities, as the CPU is a mid-range part that is more than capable of supporting the GPU in most scenarios.

This ranking suggests that while this is not a top-tier, absolute performance combo, it is well above average and should provide a very good experience for most players. The data indicates that the combo is better suited for 1080p and 1440p gaming, where it can achieve very high frame rates, while 4K gaming is limited to Medium settings. The 82nd percentile ranking of the GPU and the 83rd percentile ranking of the CPU individually are consistent with the overall combo rank, showing that the performance is balanced and there is no significant bottleneck that drags the combined result down.

The rank of 536 out of 2761 is a solid result. It outperforms a large majority of other tested systems, which likely include older CPUs paired with newer GPUs, or newer CPUs paired with less powerful GPUs. This combo represents a well-matched pairing where the Ryzen 5 7400F provides enough processing power to keep the RTX 5070 fed at mainstream resolutions, resulting in a high overall ranking in this game's specific performance metrics.

GPU Role

The NVIDIA GeForce RTX 5070 is a high-end graphics card based on the Blackwell 2.0 architecture, built on a 5 nm process. It features 12 GB of GDDR7 memory on a 192-bit bus, providing a memory bandwidth of 672.0 GB/s. The card has 6144 shading units, 192 texture mapping units, and 80 raster operation pipelines. Its boost clock is 2512 MHz. In synthetic benchmarks, it achieves a 3DMark Steel Nomad DX12 score of 5077 and a Passmark G3D score of 29137, placing it in the 82nd percentile of all GPUs. Its average benchmark score of 40377 is closely matched by the AMD Radeon Pro 580, which scores 40318 (0.1% delta), and the AMD Radeon Pro 5300, which scores 40870 (-1.2% delta).

The GPU is the definitive performance driver in this combo for Archeage. The benchmark data shows a clear correlation between the GPU's workload and the frame rate at all resolutions. At 4K Ultra, the card produces 36 FPS, which is a demanding scenario for any GPU. The 12 GB of VRAM is likely sufficient for the game's textures at 4K, but the raw compute power is the limiting factor. The card's 30.87 TFLOPS of FP32 performance is challenged by the high pixel count and complex shaders at this resolution.

At 1080p, the RTX 5070 is powerful enough to push frame rates well beyond 200 FPS at lower settings, showcasing its strength. The 225 FPS at 1080p Low and 200 FPS at 1080p Medium highlight the card's ability to handle the game's workload with ease when not constrained by the CPU. The progression of scores from Low to Ultra at each resolution demonstrates that the GPU is responsible for the majority of the performance scaling. At 1440p, the card manages an excellent 151 FPS at Low settings and a very solid 135 FPS at Medium, confirming its 1440p capability. The GPU's performance at 4K Medium (77 FPS) is the highest playable setting at that resolution, showing that the card is capable of 4K gaming, but with some compromises in visual quality to maintain a smooth frame rate.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest performance. With Low settings, the average FPS is 225. Moving to Medium settings, the average drops to 200 FPS, with a minimum of 170 FPS and a maximum of 230 FPS. High settings average 136 FPS, and Ultra settings average 93 FPS. This shows a clear performance hierarchy, with Medium offering the best balance of frame rate and visual quality.

At 2560x1440, performance scales down as expected. Low settings average 151 FPS. Medium settings produce an average of 135 FPS, with a minimum of 115 FPS and a maximum of 155 FPS. High settings drop to an average of 92 FPS, and Ultra settings fall to 62 FPS. The Medium preset at this resolution remains the most viable, keeping the minimum FPS above 115.

At 3840x2160, the GPU is heavily taxed. Low settings average 87 FPS. Medium settings achieve an average of 77 FPS, with a minimum of 66 FPS and a maximum of 89 FPS. High settings drop to an average of 52 FPS, and Ultra settings produce an average of 36 FPS. The data shows that 4K is playable only on Low or Medium presets, with Medium being the highest setting that consistently stays above the 60 FPS threshold.