Archeage

Archeage

AVERAGE FPS
114
good

This combination provides smooth gameplay with an average of 114 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 44 61 91 100
1440p QHD 70 106 149 156
1080p Full HD 106 147 169 175

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 100
3840x2160 Medium 91
3840x2160 High 61
3840x2160 Ultra 44
2560x1440 Low 156
2560x1440 Medium 149
2560x1440 High 106
2560x1440 Ultra 70
1920x1080 Low 175
1920x1080 Medium 169
1920x1080 High 147
1920x1080 Ultra 106

Archeage with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis

The AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5070 Ti pairing presents an unusual mix in ArcheAge, a 2014 MMORPG. The 4600G is a 6-core, 12-thread Zen 2 part with a base clock of 3.70 GHz and a boost clock of 4.20 GHz, built on TSMC’s 7 nm process. It carries 8 MB of shared L3 cache, with 64 KB L1 and 512 KB L2 per core, and supports dual-channel DDR4 memory with 51.2 GB/s of bandwidth. Its integrated Radeon Vega 7 graphics are irrelevant here, as the system pairs it with a dedicated GPU. The 5070 Ti is a Blackwell 2.0 chip (GB203) on a 5 nm node, with 16 GB of GDDR7 memory on a 256-bit bus delivering 896.0 GB/s of bandwidth. Its base clock is 2295 MHz, boosting to 2452 MHz, with memory running at 1750 MHz (28 Gbps effective). This GPU has 8960 shading units, 280 TMUs, 96 ROPs, 70 RT cores, and 280 tensor cores, producing 43.94 TFLOPS of FP32 compute.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 4600G’s six cores and twelve threads are the foundation of this combo’s processor-side performance. Its base clock of 3.70 GHz and boost of 4.20 GHz are modest by modern standards, but ArcheAge is an older MMO where single-thread performance often matters more than raw core counts. In 3DMark synthetic tests, this CPU scores 726 in single-thread, 1430 in 2-thread, 2732 in 4-thread, 4138 in 8-thread, 4863 in 16-thread, and 4889 in max-thread runs. The single-thread score is notably low, ranking in the 75th percentile against all CPUs, which suggests that heavily single-threaded game logic could bottleneck the system. In Cinebench R23, the multicore score is 13593 and single-core is 1919, while Geekbench shows 6093 multicore and 1575 single-core. These numbers indicate a processor that handles multi-threaded workloads competently but trails newer parts in lightly-threaded tasks.

In the measured FPS data, the CPU’s influence becomes apparent at lower resolutions. At 1080p Low, the combo hits 175 FPS, but at 1440p Low it drops to 155.8 FPS, and at 4K Low it falls to 100 FPS. The gap between 1080p and 1440p Low is roughly 11%, while the gap from 1440p to 4K Low is about 36%. This scaling pattern shows that the CPU is not the primary limiter at 1080p Low—the GPU handles the load. However, compare this to the 4600G’s nearest rivals. The AMD Ryzen 3 PRO 5355GE has an average benchmark score of 17482 (0% delta), the Intel Core i5-12450H scores 17475 (0.1% delta), the Intel Core i3-14100T scores 17636 (-0.8% delta), and the Intel Core i3-13100F scores 17665 (-1% delta). The 4600G sits essentially on par with these parts in aggregate benchmarks, meaning its core architecture and clocks are competitive with those chips for this game’s CPU demands.

The 4600G’s 65 W TDP and AM4 socket compatibility make it a low-power option, but the data indicates that in ArcheAge, the CPU is not the star. At 1080p High, the combo produces 147.4 FPS, which is only 16% lower than the 1080p Low result of 175 FPS. If the CPU were the bottleneck, raising settings would not reduce FPS so significantly. Instead, the GPU’s workload increases with settings, and the FPS drops accordingly. The CPU’s 8 MB L3 cache and dual-channel memory bandwidth of 51.2 GB/s are adequate for an MMORPG’s typical scene complexity, but they do not boost the combo beyond mid-range expectations. In short, the 4600G provides enough multi-threaded throughput to avoid crippling the system, but its single-thread scores (726 in 3DMark, 1919 in Cinebench R23) suggest that in crowded zones or heavy combat with many players, frame pacing could suffer. The data does not include min FPS values, so only averages are available, but the trend is clear: this CPU is a capable partner, not a performance leader.

GPU Role — VRAM, clocks, and how they relate to this game's results

The RTX 5070 Ti is the dominant component in this pairing. With 16 GB of GDDR7 memory, a 256-bit bus, and 896.0 GB/s of bandwidth, it has ample resources for ArcheAge’s textures and draw calls. The GPU’s boost clock of 2452 MHz and base of 2295 MHz drive its 8960 shading units, while 280 TMUs and 96 ROPs handle texture and pixel throughput. The 43.94 TFLOPS of FP32 compute is more than sufficient for a 2014 MMO. In synthetic benchmarks, the 5070 Ti scores 32974 in Passmark G3D, 231226 in Geekbench OpenCL, and 227554 in Geekbench Vulkan. Its percentile rank is 87th among all GPUs, placing it above most rivals. Its nearest competitor, the NVIDIA GeForce RTX 4080, scores 52085 (0% delta), while the AMD Radeon RX 7700S scores 52505 (-0.8% delta), the NVIDIA RTX A1000 scores 50826 (2.5% delta), and the AMD Radeon Pro W6600M scores 53414 (-2.5% delta). The 5070 Ti’s average benchmark score is 52086, essentially identical to the RTX 4080, indicating these two GPUs trade blows depending on the workload.

In ArcheAge, the GPU’s role is evident from the FPS scaling across settings. At 4K, the combo delivers 60.5 FPS on High, 90.7 on Medium, 100 on Low, and 43.6 on Ultra. The jump from High to Ultra at 4K represents a 28% FPS loss, which is substantial but expected given the heavier rendering load. The 16 GB VRAM is never a concern here, as ArcheAge’s asset sizes are modest by 2025 standards. The GPU’s 896.0 GB/s bandwidth ensures that texture streaming and shader operations do not stall. At 1080p, the GPU is clearly not the bottleneck—at Low settings, the combo hits 175 FPS, which is likely near the engine’s or CPU’s ceiling for that scene. At 1440p, Low produces 155.8 FPS, and High produces 105.5 FPS. These numbers show a GPU that scales linearly with resolution and settings, but the CPU’s influence appears at lower resolutions where the GPU is underutilized.

The 5070 Ti’s 300 W TDP and suggested 700 W PSU are not relevant to in-game performance, but the data shows that this GPU can push ArcheAge well past 60 FPS at 4K on High. The fact that 4K High yields 60.5 FPS—just above the 60 FPS threshold—suggests that the GPU is the limiting factor at that resolution, not the CPU. If the CPU were limiting, the FPS would not drop so sharply from 1080p Low (175 FPS) to 4K Low (100 FPS). That 75 FPS difference is entirely attributable to the GPU’s rendering load. The GPU’s 70 RT cores and 280 tensor cores are irrelevant for this game, which does not use ray tracing or DLSS in the measured data, but they contribute to the GPU’s overall compute capability. In summary, the 5070 Ti provides overwhelming performance for ArcheAge, making the CPU the weaker link only at low settings and low resolutions.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

Resolution scaling reveals where the bottleneck lies. From 1080p Low (175 FPS) to 1440p Low (155.8 FPS), the drop is 11%. From 1440p Low to 4K Low (100 FPS), the drop is 36%. This is a classic GPU-limited scaling pattern—as pixel count increases, the GPU’s workload grows, and FPS falls. The CPU’s role is static across resolutions, so if the CPU were the limit, FPS would remain flat. Instead, the data shows a consistent decline with higher pixel counts. At High settings, 1080p yields 147.4 FPS, 1440p yields 105.5 FPS (a 28% drop), and 4K yields 60.5 FPS (a 43% drop from 1440p). This steeper decline at High settings compared to Low settings confirms that the GPU is the limiting component; the gap between Low and High at the same resolution grows as resolution increases.

At 1080p, the difference between Low (175 FPS) and Ultra (105.9 FPS) is 40%. At 1440p, Low (155.8 FPS) to Ultra (70.4 FPS) is a 55% drop. At 4K, Low (100 FPS) to Ultra (43.6 FPS) is a 56% drop. The similar magnitude of the Low-to-Ultra drop at 1440p and 4K indicates that the GPU is saturated at those resolutions, and the CPU is not adding a significant overhead. At 1080p, the smaller drop (40%) suggests that the CPU begins to limit the maximum FPS, preventing the GPU from fully stretching its legs. Specifically, at 1080p Low, 175 FPS is likely near the CPU’s practical limit for this game’s engine, as the 4600G’s single-thread score of 726 in 3DMark is low. If the CPU had more headroom, the 1080p Low score might be higher. But the data does not support a CPU bottleneck at 1440p or 4K, where the FPS values (155.8 and 100 on Low) are far below what a CPU-limited scenario would produce.

The 4K Ultra result of 43.6 FPS is the lowest measured, and it aligns with the GPU’s heavy load from Ultra settings. The 5070 Ti, despite its high benchmark scores, cannot maintain 60 FPS at 4K Ultra in this game, which indicates that ArcheAge’s Ultra preset includes expensive effects that tax even a top-tier GPU. The 4K Medium result of 90.7 FPS and 4K High of 60.5 FPS show that dropping from Ultra to High nearly doubles the FPS, and further dropping to Medium pushes it to 90.7 FPS. This scaling is almost purely GPU-driven. In contrast, the 1080p results show less variation between Low (175) and Medium (169.1), with High (147.4) and Ultra (105.9) being more distinct. The small gap between Low and Medium at 1080p suggests that the CPU is near its limit, as the GPU’s extra work at Medium does not reduce FPS proportionally. Overall, resolution scaling points to the GPU as the primary limiter at 1440p and 4K, with the CPU becoming a secondary limiter at 1080p.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the combo produces 175 FPS on Low, 169.1 FPS on Medium, 147.4 FPS on High, and 105.9 FPS on Ultra. The spread from Low to Ultra is 69.1 FPS, with Ultra being 40% slower than Low. At 2560x1440, Low delivers 155.8 FPS, Medium 148.6 FPS, High 105.5 FPS, and Ultra 70.4 FPS. The High-to-Ultra drop at 1440p is 33%, which is significant. At 3840x2160, Low produces 100 FPS, Medium 90.7 FPS, High 60.5 FPS, and Ultra 43.6 FPS. The 4K Ultra result is the only sub-60 FPS result in the entire dataset, and it is 29% slower than 4K High.

Comparing settings across resolutions, the Low preset shows a decline from 175 FPS at 1080p to 155.8 at 1440p (an 11% drop) and further to 100 at 4K (a 36% drop from 1440p). Medium settings drop from 169.1 at 1080p to 148.6 at 1440p (12% drop) and 90.7 at 4K (39% drop from 1440p). High settings drop from 147.4 at 1080p to 105.5 at 1440p (28% drop) and 60.5 at 4K (43% drop from 1440p). Ultra settings drop from 105.9 at 1080p to 70.4 at 1440p (34% drop

Hardware Specifications

AMD Ryzen 5 4600G

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5070 Ti

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2452 MHz MHz
TDP 300 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5070 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 100.0
3840x2160 Medium 90.7
3840x2160 High 60.5
3840x2160 Ultra 43.6
2560x1440 Low 155.8
2560x1440 Medium 148.6
2560x1440 High 105.5
2560x1440 Ultra 70.4
1920x1080 Low 175.0
1920x1080 Medium 169.1
1920x1080 High 147.4
1920x1080 Ultra 105.9

Archeage with Ryzen 5 4600G + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 5070 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 5 4600G + RTX 5070 Ti

Explore FPS benchmarks for other games using this same hardware combination.