Archeage

# Archeage with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 2060

The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 2060 delivers a playable 1080p experience in Archeage, but the data reveals significant scaling challenges as resolution increases. This combination ranks 2928th out of 3708 tested combos in this game, placing it in the lower-middle tier of the database. The CPU's 71st percentile ranking among all processors (with an average benchmark score of 17507) combined with the GPU's 58th percentile (average score 15290) suggests a balanced pairing, yet Archeage's demanding engine exposes the RTX 2060's 6 GB VRAM buffer as a limiting factor at higher resolutions.

Resolution Scaling

The measured FPS data shows a steep performance cliff when moving from 1080p to 4K. At 1080p Low settings, the combo achieves 117 FPS average, which drops to 79 FPS at 1440p (a 32.5% reduction) and further to 45 FPS at 4K (a 61.5% reduction from 1080p). This scaling pattern indicates that the RTX 2060 becomes the primary bottleneck as pixel count increases, with the CPU's 6 cores and 12 threads providing sufficient headroom at lower resolutions.

At Medium settings, the frame rate progression tells a similar story: 104 FPS at 1080p, 70 FPS at 1440p, and 40 FPS at 4K. The gap between 1080p and 1440p Medium (34 FPS drop) is proportionally larger than the gap between 1440p and 4K (30 FPS drop), suggesting that the GPU's memory bandwidth of 336.0 GB/s and 192-bit bus width start to strain beyond 1080p.

The High preset shows even more dramatic scaling: 71 FPS at 1080p, 48 FPS at 1440p, and just 27 FPS at 4K. The 4K High result falls below the 30 FPS playability threshold, confirming that this combo cannot handle 4K gaming in Archeage beyond Low settings. The Ultra preset is the most punishing, with 48 FPS at 1080p dropping to 33 FPS at 1440p and a barely playable 19 FPS at 4K.

The min/max FPS data available for Medium settings offers insight into frame pacing. At 1080p Medium, the range spans 89 to 120 FPS, indicating reasonable consistency. At 1440p Medium, the 60 to 81 FPS range shows tighter variance. The 4K Medium range of 34 to 46 FPS demonstrates that even when the average stays above 40, the minimum can dip into stutter territory.

This scaling behavior points to a system where the RTX 2060's 6 GB GDDR6 memory and 1920 shading units are the dominant constraint. The CPU's single-thread performance, evidenced by a 3DMark single-thread score of 726 and Cinebench R23 single-core score of 1919, appears sufficient for Archeage's MMORPG workloads at 1080p and 1440p, but cannot compensate for the GPU's limitations at 4K.

FAQ

Q: Can this combo run Archeage at 60 FPS in 1080p?

A: Yes, at Low and Medium settings. The 1080p Low preset averages 117 FPS, while Medium averages 104 FPS with a minimum of 89 FPS. High settings average 71 FPS, which is above 60 but offers less headroom for demanding scenes.

Q: Is 4K gaming viable with this hardware?

A: Only at Low settings, where the average is 45 FPS. Medium drops to 40 FPS, High to 27 FPS, and Ultra to 19 FPS. The 4K Ultra result is far below playable thresholds, and even 4K Medium's 34 FPS minimum suggests inconsistent performance.

Q: How does the RTX 2060 compare to its nearest rivals for this game?

A: The RTX 2060's average benchmark score of 15290 is nearly identical to the GTX 580 (15283, 0% delta) and Radeon 680M (15270, 0.1% delta). It sits slightly ahead of the RTX 3050 OEM (15199, 0.6% delta) and RX 7600 (15171, 0.8% delta), though these differences are marginal.

Q: What CPU performance tier does the Ryzen 5 4600G occupy?

A: The CPU's average benchmark score of 17507 places it in the 71st percentile of all CPUs. Its nearest rival, the Ryzen 3 PRO 5355GE, scores 17482 (0.1% delta), while the Intel Core 7 150U scores 17395 (0.6% delta). The gap to faster rivals is small, with the Ryzen 3 8300GE at 17614 (-0.6% delta).

Q: What is the best resolution-to-settings ratio for consistent frame times?

A: 1080p Medium provides the best balance, with a 104 FPS average and a tight 89-120 FPS range. The 1440p Medium option delivers 70 FPS average with a 60-81 FPS range, which is also consistent but requires accepting a 33% performance hit from 1080p.

Q: Does the 6 GB VRAM capacity impact performance in Archeage?

A: The data suggests yes, particularly at higher resolutions. The steep FPS drops from 1080p to 1440p and 4K across all settings align with the GPU's 6 GB memory capacity being insufficient for Archeage's texture and asset streaming at higher pixel counts, especially given the 336.0 GB/s bandwidth limit.

GPU Role

The NVIDIA GeForce RTX 2060 is the decisive component in this pairing for Archeage. Its 6 GB GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which proves adequate for 1080p and 1440p gaming but becomes a bottleneck at 4K. The GPU's 1920 shading units, 120 texture mapping units, and 48 render output units deliver a pixel rate of 80.64 GPixel/s and texture rate of 201.6 GTexel/s, which are the raw throughput figures that determine how quickly the card can process Archeage's visuals.

The card's boost clock of 1680 MHz (base 1365 MHz) and 14 Gbps effective memory speed are modest by modern standards, and the 12 nm Turing architecture's 6.451 TFLOPS FP32 performance places it firmly in the mid-range segment. The RTX 2060's 58th percentile ranking among all GPUs (average score 15290) reflects this positioning, with its nearest rivals being the older GTX 580 (15283, 0% delta) and the integrated Radeon 680M (15270, 0.1% delta) — the latter being notable as an iGPU matching a discrete card.

In Archeage specifically, the GPU's performance ceiling is clearly exposed by the resolution scaling data. At 1080p, the card maintains playable frame rates across all settings, but the jump to 1440p costs 32-35% of performance depending on preset. The 4K results show the card's memory subsystem struggling, with even Low settings only reaching 45 FPS. The RTX 2060's 30 RT cores and 240 tensor cores do not meaningfully contribute to this MMORPG's rasterization workload, so the card's traditional shading and texture units carry the load.

The GPU's 160 W TDP and 450 W suggested PSU requirement indicate this is a power-efficient card for its performance class, but the 6 GB VRAM appears to be the critical weakness for Archeage's higher-resolution demands. The measured FPS data strongly suggests that players should target 1080p or 1440p with this GPU, as the 4K results fall into unplayable territory for all but the lowest settings.

How This Combo Ranks

This specific combination of Ryzen 5 4600G and RTX 2060 ranks 2928th out of 3708 tested combos in Archeage, placing it in the 21st percentile of all tested systems. This rank reflects the hardware's mid-tier positioning, with the CPU's 71st percentile and GPU's 58th percentile scores combining to produce a system that handles 1080p well but struggles at higher resolutions.

The combo's rank is influenced by both components' performance tiers. The Ryzen 5 4600G's nearest CPU rivals — the Ryzen 3 PRO 5355GE (0.1% delta), Ryzen 3 8300GE (-0.6% delta), and Core 7 150U (0.6% delta) — all fall within 1% of its average benchmark score, indicating tight competition in this CPU segment. Similarly, the RTX 2060's GPU rivals are clustered within 0.8% of its score, with the GTX 580 and Radeon 680M essentially matching it.

For Archeage specifically, the 2928th rank suggests that many other CPU-GPU combinations deliver better performance. This is likely because the game favors higher-end GPUs with more VRAM and bandwidth, and the RTX 2060's 6 GB capacity is a limiting factor. The 3708 total combos tested means this system sits in the bottom 22% of all tested configurations, which aligns with the measured FPS data showing playable but not exceptional performance at 1080p.

The CPU's 6-core/12-thread configuration with 8 MB shared L3 cache and 51.2 GB/s memory bandwidth provides adequate support for the GPU at lower resolutions, but the combo's ranking indicates that Archeage's performance is more GPU-bound than CPU-bound. Players with this hardware should expect competitive but not top-tier performance relative to the broader database of tested systems.

Measured FPS Breakdown

The complete measured FPS dataset reveals clear performance tiers across resolutions and settings. At 1920x1080, the combo delivers: 117 FPS average on Low, 104 FPS average (89-120 FPS range) on Medium, 71 FPS average on High, and 48 FPS average on Ultra. These results show that 1080p is fully playable across all settings, with even Ultra maintaining a 48 FPS average.

Moving to 2560x1440, performance drops significantly: Low yields 79 FPS, Medium 70 FPS (60-81 FPS range), High 48 FPS, and Ultra 33 FPS. The 1440p results indicate that Low and Medium are viable for smooth gameplay, High is borderline at 48 FPS, and Ultra dips below 35 FPS which may cause noticeable stuttering in busy MMORPG scenes.

At 3840x2160, the results are largely unplayable: Low averages 45 FPS, Medium 40 FPS (34-46 FPS range), High 27 FPS, and Ultra 19 FPS. The 4K Low result is the only preset that approaches playability, but even it falls below the 60 FPS target most players prefer. The 4K Medium minimum of 34 FPS indicates significant frame drops during intense combat or crowded areas.

The data shows a consistent pattern: each resolution increase costs roughly 30-35% performance at equivalent settings. The 1080p to 1440p transition reduces FPS by 32-33% across Low, Medium, and High presets, while the 1440p to 4K transition costs an additional 43-46%. This non-linear scaling suggests that the GPU's memory bandwidth and capacity become increasingly strained as resolution grows.

The Medium settings rows provide the only complete min/max data, showing that frame pacing is consistent at each resolution: 89-120 FPS at 1080p, 60-81 FPS at 1440p, and 34-46 FPS at 4K. The tighter ranges at lower resolutions indicate more stable performance, while the wider relative spread at 4K (34-46 FPS) shows the GPU struggling to maintain consistent frame times.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo is 1080p Medium settings, which delivers 104 FPS average with a minimum of 89 FPS. This preset offers a substantial improvement over High settings (71 FPS) while maintaining a 33 FPS margin above the 60 FPS threshold. The 89 FPS minimum ensures that even demanding scenes rarely dip below playable levels.

For players prioritizing smoothness over visual fidelity, 1080p Low at 117 FPS average provides the highest frame rates, though the visual trade-off may not be worth the 13 FPS gain over Medium. The 1080p High preset at 71 FPS is acceptable for most players but leaves less headroom for frame drops in crowded areas or during large-scale PvP.

At 1440p, the Medium preset at 70 FPS (60-81 FPS range) is the recommended choice, as it maintains a 60 FPS minimum while offering better visual quality than Low. The 1440p High preset at 48 FPS is playable but risks dropping below 40 FPS in demanding scenes, making it a secondary option. The 1440p Ultra at 33 FPS is not recommended for consistent gameplay.

The 4K resolution is only viable at Low settings (45 FPS average), and even then the experience will be marginal. Players with 4K displays should consider running at 1440p with Medium settings for a better balance of visual quality and performance, or accept the 4K Low compromise. The 4K Medium's 34 FPS minimum and 4K High's 27 FPS average are both below playable thresholds for an MMORPG where reaction times matter.

The Ultra preset is consistently the worst performer at every resolution, offering only 48 FPS at 1080p and 19 FPS at 4K. The visual improvements from Ultra likely do not justify the 54% performance penalty compared to High at 1080p. For this hardware combination, Medium settings provide the best balance of visual quality, frame rate, and consistency across all resolutions, with High as a viable alternative at 1080p for players who prioritize graphics over headroom.