Archeage

# Archeage with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 2060

The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 2060 delivers playable performance in Archeage, but only when settings and resolution are carefully managed. The measured data shows this combo ranks 2928th out of 3708 tested combinations, placing it in the lower half of the database. The strongest results appear at 1080p with Low settings, where the system achieves 117 FPS, while 4K Ultra is virtually unplayable at 19 FPS. This is a combination that prefers lower resolutions and modest presets, with the CPU providing a solid foundation and the GPU becoming the limiting factor at higher pixel counts.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and reveals a GPU-bound system at higher resolutions. At High settings, the average frame rate falls from 71 FPS at 1920x1080 to 48 FPS at 2560x1440, then to 27 FPS at 3840x2160. That represents a 62% reduction from 1080p to 4K at High settings. The pattern is consistent across all presets: Low settings go from 117 FPS at 1080p to 79 FPS at 1440p to 45 FPS at 4K, while Medium settings drop from 104 FPS to 70 FPS to 40 FPS across the same resolution steps.

The scaling behavior points to the GPU as the primary bottleneck at 1440p and 4K. The RTX 2060's 6 GB of GDDR6 memory on a 192-bit bus with 336.0 GB/s bandwidth is adequate for 1080p but struggles to maintain frame rates as pixel count quadruples. The data shows that moving from 1080p to 1440p costs roughly 30-33% of performance across all settings, while moving from 1440p to 4K costs an additional 42-45%. This non-linear degradation is characteristic of a GPU running out of memory bandwidth or fill rate capacity.

At 1080p, the CPU's influence becomes more apparent. The Ryzen 5 3600, with its 6 cores and 12 threads, delivers enough processing power to keep the GPU fed at lower resolutions. The difference between Low and Medium settings at 1080p is only 13 FPS (117 vs 104), suggesting the GPU is still the limiting factor even at the lowest preset. However, the jump from Medium to High at 1080p costs 33 FPS (104 to 71), indicating that High settings introduce GPU effects that significantly increase the workload.

The 4K results are telling. Even at Low settings, the system only manages 45 FPS, which is below the 60 FPS threshold many players consider smooth. At Medium settings, 4K dips to 40 FPS with a minimum of 34 FPS, showing inconsistent frame pacing. The Ultra preset at 4K is essentially unplayable at 19 FPS. This pattern confirms that the RTX 2060 does not have the raw throughput for 4K gaming in Archeage, regardless of preset selection.

CPU Role

The Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture (Matisse codename), built on a 7 nm process at TSMC. It has a base clock of 3.60 GHz and a boost clock of 4.20 GHz, with 32 MB of shared L3 cache. The CPU's benchmark results show strong multi-threaded capabilities: Cinebench R23 multi-core scores 15045 points, while single-core scores 2124 points. The 3DMark 16-thread test yields 4605 points, and the max-thread test produces 4603 points, indicating consistent scaling across thread counts.

In the context of Archeage, an MMORPG, the CPU's thread handling is relevant because these games often involve many entities, player characters, and world state calculations. The Ryzen 5 3600's 12 threads provide ample parallel processing for such workloads. The Geekbench multi-core score of 7372 and Passmark multithread score of 17700 both indicate solid multi-threading performance. However, the single-thread scores are comparatively modest—3DMark single-thread is 696, and Passmark single-thread is 2562—which could matter for game logic that runs on a single thread.

The CPU's percentile ranking of 71 against all CPUs means it outperforms roughly 71% of processors in the database. Its nearest rivals include the Intel Core i7-1260P (0.2% ahead), Intel Core i5-11400 (0.2% behind), and AMD EPYC 7573X (0.2% behind). These deltas are tiny, effectively making the Ryzen 5 3600 equivalent to these competitors in average benchmark score. The i5-11400 is a particularly relevant comparison for gaming, and the 0.2% difference suggests no meaningful performance gap between them.

At 1080p with Low settings, the system achieves 117 FPS, which is likely near the CPU's practical ceiling for this game. The fact that Low and Medium settings at 1080p differ by only 13 FPS suggests that the CPU is keeping pace with the GPU's output. The 3DMark 8-thread score of 3844 and 4-thread score of 2579 show that the CPU scales well with moderate thread counts, which aligns with typical MMORPG workloads that may use 4-8 threads heavily.

GPU Role

The RTX 2060 is a Turing-architecture GPU with 1920 shading units, 120 texture mapping units, and 48 ROPs. It operates at a base clock of 1365 MHz and a boost clock of 1680 MHz, with memory running at 1750 MHz (14 Gbps effective). The 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth. The GPU includes 30 RT cores and 240 tensor cores, though Archeage likely does not utilize ray tracing or DLSS features given its 2014 release date.

The GPU's benchmark results place it in the 58th percentile among all GPUs. Its Passmark G3D score is 14111, while the 3DMark Steel Nomad DX12 score is 1242. The nearest rivals include the GTX 580 (0% delta), AMD Radeon 680M (0.1% ahead), RTX 3050 OEM (0.6% ahead), and RX 7600 (0.8% ahead). The near-identical scores between the RTX 2060 and GTX 580 are notable—the latter is a much older card, but the average benchmark score difference is negligible.

In Archeage, the GPU's performance profile suggests it is the limiting factor at resolutions above 1080p. The 4K results at High settings (27 FPS) and Ultra (19 FPS) are far below playable thresholds, while even 1440p Ultra only reaches 33 FPS. The memory configuration of 6 GB may also be a constraint, as modern game textures at high resolutions can exceed this capacity. However, the game's 2014 release date means texture sizes are likely smaller than contemporary titles, so the 6 GB capacity is probably sufficient for this specific game.

The GPU's FP32 performance of 6.451 TFLOPS and texture rate of 201.6 GTexel/s are moderate figures that align with its 1080p-focused positioning. At 1080p High, the system achieves 71 FPS, which is playable but not smooth by modern standards. The gap between Low (117 FPS) and High (71 FPS) at 1080p is 46 FPS, indicating that High settings impose significant additional GPU workload compared to Low.

How This Combo Ranks

This combination ranks 2928th out of 3708 tested combos in Archeage, placing it in the 21st percentile (roughly the bottom fifth) of all tested systems. This is a low ranking that reflects the game's demanding nature and the modest hardware involved. The rank suggests that most tested combinations deliver higher frame rates in this game.

The ranking is consistent with the measured FPS data. At 1080p Low, the system achieves 117 FPS, which is solid, but this is the best-case scenario. The more common usage scenario of 1080p High yields only 71 FPS, and 1440p High drops to 48 FPS. These numbers are below what many other combinations in the database achieve, explaining the low percentile rank.

The CPU's 71st percentile and GPU's 58th percentile rankings individually are respectable, but their combined performance in Archeage is less impressive. This suggests that either the game is particularly demanding on one component, or the combination has some inefficiency. The data shows that at 1080p, the GPU is the bottleneck, as evidenced by the large FPS differences between presets. At 4K, the GPU is even more clearly the limiting factor, with all presets producing sub-50 FPS results.

The nearest rival combos in rank would likely include systems with similar CPUs but different GPUs, or similar GPUs with different CPUs. However, the database does not provide specific rival combo comparisons for this game. The overall rank of 2928 out of 3708 indicates that players seeking higher frame rates in Archeage would need to consider stronger GPUs or accept lower settings.

Settings Recommendations

Based on the measured FPS rows, the best experience for this combination depends on the target resolution and frame rate. At 1920x1080, the Low preset delivers 117 FPS, which is the highest measured result across all settings and resolutions. This is the only configuration that exceeds 100 FPS, making it the best choice for players who prioritize smoothness. The Medium preset at 1080p achieves 104 FPS with a minimum of 89 FPS and maximum of 120 FPS, which is also excellent and offers better visual quality with a modest 13 FPS trade-off.

For players who want better visuals at 1080p, the High preset at 71 FPS is playable but noticeably less smooth than Low or Medium. The Ultra preset at 1080p drops to 48 FPS, which is borderline for an MMORPG where reaction times matter. The data suggests that Medium at 1080p is the sweet spot: 104 FPS average with a minimum of 89 FPS ensures consistent frame pacing, and the visual upgrade over Low is significant.

At 2560x1440, the Low preset achieves 79 FPS, which is the only 1440p configuration above 70 FPS. Medium at 1440p provides 70 FPS with a 60 FPS minimum, which is acceptable for less demanding players. High at 1440p drops to 48 FPS, and Ultra falls to 33 FPS. Given the frame rate drops, 1440p is only recommended with Low or Medium settings. The 4K resolution should be avoided entirely, as even Low settings only reach 45 FPS, and Medium dips to 40 FPS with a 34 FPS minimum.

The recommended configuration is 1080p with Medium settings, providing 104 FPS average and a minimum of 89 FPS. This balances visual quality with smooth performance. Players who absolutely need the highest frame rates can use 1080p Low at 117 FPS, while those with less demanding standards can try 1440p Medium at 70 FPS. The Ultra preset is not recommended at any resolution, as it produces the lowest frame rates (19-48 FPS) with marginal visual improvements over High.

FAQ

Q: What is the best resolution and settings for this CPU/GPU combo in Archeage?

A: The measured data shows 1920x1080 with Medium settings provides 104 FPS average with a minimum of 89 FPS, making it the best balance of visual quality and performance. For maximum frame rates, 1080p Low achieves 117 FPS.

Q: Can this system handle 4K gaming in Archeage?

A: No. At 3840x2160, even Low settings only reach 45 FPS, while Medium drops to 40 FPS (34 FPS minimum), High falls to 27 FPS, and Ultra is unplayable at 19 FPS. The GPU is the limiting factor at 4K.

Q: How does the Ryzen 5 3600 compare to its nearest rivals?

A: The CPU's average benchmark score of 17035 is virtually identical to the Intel Core i7-1260P (17007, 0.2% ahead), Intel Core i5-11400 (17067, 0.2% behind), AMD EPYC 7573X (17070, 0.2% behind), and AMD EPYC 7742 (16998, 0.2% ahead). These differences are negligible.

Q: Is the RTX 2060's 6 GB VRAM sufficient for Archeage?

A: The data suggests yes, as the game's 2014 release date likely means textures are not excessively large. The GPU's performance at 1080p and 1440p indicates memory capacity is not the primary constraint; rather, the GPU's raw throughput limits higher resolutions.

Q: What frame rate can I expect at 1440p with this combo?

A: At 2560x1440, Low settings achieve 79 FPS, Medium reaches 70 FPS (60 FPS minimum), High drops to 48 FPS, and Ultra falls to 33 FPS. Only Low and Medium are recommended for smooth gameplay.

Q: How does this combo rank compared to all tested systems in Archeage?

A: This combination ranks 2928th out of 3708 tested combos, placing it in the bottom 21% of systems. The CPU ranks in the 71st percentile and the GPU in the 58th percentile individually, but their combined performance in this game is below average.