Archeage

Archeage, a 2014 MMORPG, shows a clear performance profile when paired with the AMD Ryzen 5 4600G and AMD Radeon RX 7700. The measured frame rates across resolutions and settings reveal a system that is strongly influenced by the graphics card at higher loads, while the CPU’s six cores and twelve threads provide a solid foundation for the game’s typical multiplayer scenarios. This analysis examines the measured FPS data, component roles, and ranking to provide a precise picture of this combo’s capabilities.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, indicating that the AMD Radeon RX 7700 becomes the primary limiting factor as pixel count increases. At Low settings, the average frame rate falls from 162 FPS at 1920x1080 to 109 FPS at 2560x1440, a reduction of 53 FPS, and then to 62 FPS at 3840x2160, a further drop of 47 FPS. This pattern shows a near-linear scaling loss with resolution, which is typical for a GPU-bound scenario where the render load grows exponentially with each step up in pixel density.

At Medium settings, the same trend is visible: 144 FPS at 1080p, 97 FPS at 1440p, and 55 FPS at 4K. The gap between 1080p and 1440p is 47 FPS, while the gap between 1440p and 4K is 42 FPS. The slight narrowing of the delta at higher resolutions suggests that the GPU’s memory bandwidth and compute resources are being taxed more uniformly, but the overall trajectory remains downward. High settings follow suit with 98 FPS at 1080p, 66 FPS at 1440p, and 38 FPS at 4K, showing a 32 FPS drop and then a 28 FPS drop.

Ultra settings produce the lowest figures: 67 FPS at 1080p, 45 FPS at 1440p, and 26 FPS at 4K. The 4K Ultra result of 26 FPS is below playable thresholds for most users, and even 1440p Ultra at 45 FPS is marginal. The data suggests that the RX 7700, with its 16 GB of GDDR6 memory and 624.1 GB/s bandwidth, is handling the memory demands well, but the raw shading power—25.18 TFLOPS FP32—is insufficient to maintain high frame rates at 4K with demanding presets. The scaling behavior points to a GPU-limited system at 4K, while at 1080p, the higher frame rates begin to hint at possible CPU involvement, though the Ryzen 5 4600G’s performance appears adequate for the measured results.

FAQ

Q: What is the highest average frame rate achieved by this combo in Archeage?

A: The highest measured average frame rate is 162 FPS, achieved at 1920x1080 resolution with Low settings. This is the only setting and resolution combination that exceeds 160 FPS, indicating that the system can hit very high refresh rates only when graphical load is minimized.

Q: How does the combo perform at 4K resolution with Ultra settings?

A: At 3840x2160 with Ultra settings, the average frame rate is 26 FPS. This is the lowest measured result in the entire dataset, making it unsuitable for smooth gameplay. The GPU is the clear bottleneck at this extreme configuration.

Q: Is there a significant difference between Low and Medium settings at 1440p?

A: Yes, the difference is 12 FPS. Low settings average 109 FPS, while Medium settings average 97 FPS. This is a modest drop, suggesting that Medium preset offers a reasonable balance of visual quality and performance at 2560x1440.

Q: What are the minimum and maximum frame rates recorded for Medium settings?

A: For Medium settings, the data includes minimum and maximum values. At 1920x1080, the range is 122 to 166 FPS. At 2560x1440, the range is 82 to 111 FPS. At 3840x2160, the range is 47 to 64 FPS. These figures show that frame pacing is consistent, with no severe stutters indicated by the minimum values.

Q: Does the CPU or GPU appear to be the limiting factor at 1080p Low settings?

A: At 1080p Low, the average FPS is 162. This high number suggests that the GPU is still capable of more work, but the CPU’s single-thread performance—evident from a 3dmark_single_thread score of 726—may be approaching its limit. However, without higher resolution Low data that exceeds this, the data alone cannot definitively separate the two, but the fact that 1440p Low yields 109 FPS shows the GPU is still scaling with resolution.

Q: How does this combo rank among all tested combinations?

A: The combo ranks 1276 out of 2761 tested combinations in Archeage, placing it in the upper-middle tier of systems. This percentile position reflects its ability to handle the game at playable frame rates at 1080p and 1440p, but not at 4K Ultra.

CPU Role

The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, codenamed Renoir. Its base clock is 3.70 GHz and boost clock is 4.20 GHz, with a 65 W TDP. In Archeage, an MMORPG that often involves numerous player characters and complex game logic, the CPU’s role is to handle game simulation, network processing, and draw calls. The benchmark results for this CPU show a passmark_multithread score of 15992 and a passmark_single_thread score of 2653, indicating balanced multi-threaded and single-threaded capabilities.

The measured FPS data shows that at 1080p Low, the system reaches 162 FPS. This is a high value, but not exceptionally so, suggesting that the CPU is capable of feeding the GPU enough data to maintain this frame rate. However, the 3dmark_single_thread score of 726 and cinebench_r23_singlecore score of 1919 reveal that the Zen 2 cores are not top-tier for single-threaded workloads. In Archeage, where the main game thread often dictates performance, this could be a limiting factor in crowded areas, but the measured data does not show a hard CPU cap at the tested configurations.

The CPU’s 8 MB of shared L3 cache is modest by modern standards, but for a 2014 game, it is more than sufficient. The dual-channel DDR4 memory support, with a bandwidth of 51.2 GB/s, is also adequate. The Ryzen 5 4600G’s percentile rank against all CPUs is 71, meaning it outperforms 71% of tested processors. Its nearest rivals include the AMD Ryzen 3 PRO 5355GE, which has a similar avgScore of 17482 with a 0.1% delta, and the Intel Core i3-14100T, which scores 17648 with a -0.8% delta. These comparisons show that the 4600G is competitive with modern low-power quad-core parts, but its age is evident in its lower single-thread performance relative to newer designs.

In the context of this combo, the CPU does not appear to be the primary bottleneck at 4K, where the GPU is clearly overwhelmed. At 1080p, the high frame rates suggest that the CPU can keep up with the GPU’s output to a degree, but the lack of data beyond Low settings makes it difficult to isolate a CPU limit. The fact that 1080p Ultra yields 67 FPS, while 1080p Low yields 162 FPS, shows that the GPU is still the main driver of performance differences as settings change. The CPU’s 12 threads may help in multi-player scenarios, but the raw FPS numbers here are more influenced by the GPU’s rendering load.

How This Combo Ranks

The combination of the AMD Ryzen 5 4600G and AMD Radeon RX 7700 ranks 1276 out of 2761 tested combos in Archeage. This places it in the 46th percentile of all tested systems, meaning it performs better than 46% of combinations and worse than 54%. This mid-pack ranking is consistent with a system that pairs a mid-range older CPU with a modern mid-range GPU. The ranking reflects that while the RX 7700 is capable, the Ryzen 5 4600G’s older architecture holds back overall performance in a game that may rely on CPU single-thread speed.

The GPU’s individual percentile rank is 58, meaning it outperforms 58% of all GPUs tested. Its nearest rivals include the AMD Radeon RX 9060, which has a score of 16014 with a -1% delta, and the NVIDIA GeForce RTX 3060 Ti, which scores 16129 with a -1.7% delta. This indicates that the RX 7700 is slightly below the RTX 3060 Ti in average benchmark score, but the difference is small. The CPU’s percentile rank of 71 is higher than the GPU’s, suggesting that the CPU is relatively stronger compared to its own pool than the GPU is to its pool.

In the game-specific ranking, the combo’s position at 1276 suggests that many other systems, likely with newer CPUs, achieve better results. However, the measured FPS data shows that this combo is still capable of delivering playable frame rates at 1080p and 1440p for most settings. The rank is a holistic measure, but it does not negate the fact that at 1080p Medium, the system averages 144 FPS, which is excellent for most displays. The ranking is more indicative of the system’s potential relative to other high-end combos, rather than its absolute ability to run Archeage.

The data shows that the combo is not a top performer, but it is far from the bottom. The 2761 total combos include many with stronger CPUs, so a rank of 1276 is expected for a 4000-series Ryzen 5. The CPU’s nearest rivals, such as the AMD Ryzen 3 8300GE with a score of 17614, are newer and faster, but the 4600G’s six cores provide more threads, which may benefit MMORPGs. Overall, this combo is a balanced mid-range option that will handle Archeage well at mainstream resolutions, but it will not compete with top-tier systems.

GPU Role

The AMD Radeon RX 7700 is a RDNA 3.0 architecture GPU, built on a 5 nm process at TSMC. It features 2560 shading units, 160 TMUs, and 96 ROPs, with a base clock of 1900 MHz and a boost clock of 2459 MHz. The memory subsystem is substantial, with 16 GB of GDDR6 on a 256-bit bus, providing a bandwidth of 624.1 GB/s. This is a critical specification for Archeage, which can use large textures and high-resolution assets, especially at 4K.

The GPU’s benchmark scores include a passmark_g3d score of 20974 and a 3dmark_steel_nomad_dx12 score of 2865. Its average benchmark score is 15852, with a percentile rank of 58 against all GPUs. The nearest rival, the AMD Radeon R9 370X, has a score of 15862 with a -0.1% delta, meaning the RX 7700 is essentially tied with an older, less powerful card in synthetic tests, though this is likely due to driver optimizations and test variations. The RX 9060 and RTX 3060 Ti are slightly ahead, with deltas of -1% and -1.7%, respectively.

In Archeage, the GPU’s role is to render the game world, handle shaders, and process effects. The measured FPS data shows that the GPU is the main bottleneck at 4K. At 3840x2160, the average FPS ranges from 62 at Low to 26 at Ultra, all of which are below the 60 FPS target for smooth gameplay. Even at 1440p, Ultra settings only achieve 45 FPS, indicating that the GPU struggles with the highest preset at this resolution. The 16 GB of VRAM is unlikely to be exceeded by Archeage, so the limitation is compute and memory bandwidth, not capacity.

The GPU’s boost clock of 2459 MHz and the 25.18 TFLOPS FP32 performance are respectable, but they are not enough to drive 4K Ultra in this game. The 624.1 GB/s bandwidth is high, but the sheer number of pixels at 4K requires more raw throughput. At 1080p, the GPU performs much better, with Low settings reaching 162 FPS and Medium at 144 FPS. This shows that the GPU is well-suited for 1080p gaming, where it can deliver high refresh rates. The data indicates that the RX 7700 is a capable 1080p and 1440p card, but it is not a 4K powerhouse for this particular title.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best performance. Low settings average 162 FPS, which is the highest measured value in the dataset. Medium settings average 144 FPS, with a minimum of 122 FPS and a maximum of 166 FPS, showing good frame consistency. High settings average 98 FPS, a significant drop from Medium, while Ultra settings average 67 FPS. The gap between Low and Medium is 18 FPS, between Medium and High is 46 FPS, and between High and Ultra is 31 FPS. This suggests that the High preset introduces a substantial graphical load that the GPU cannot fully compensate for, while Ultra adds even more pressure.

At 2560x1440, the performance scales down as expected. Low settings average 109 FPS, which is still high but 53 FPS lower than at 1080p. Medium settings average 97 FPS, with a minimum of 82 FPS and a maximum of 111 FPS. The minimum of 82 FPS indicates that even in demanding scenes, the system maintains a playable frame rate. High settings average 66 FPS, while Ultra averages 45 FPS. The drop from Low to Medium is 12 FPS, from Medium to High is 31 FPS, and from High to Ultra is 21 FPS. The Ultra result of 45 FPS is below the 60 FPS threshold, making it less desirable for competitive play.

At 3840x2160, the GPU is heavily taxed. Low settings average 62 FPS, which is the only 4K result above 60 FPS. Medium settings average 55 FPS, with a minimum of 47 FPS and a maximum of 64 FPS. High settings average 38 FPS, and Ultra settings average 26 FPS. The scaling from Low to Medium is 7 FPS, from Medium to High is 17 FPS, and from High to Ultra is 12 FPS. The 4K results show that only Low settings provide a playable experience, and even then, it is marginal. The data clearly illustrates that the RX 7700 is not designed for 4K gaming in Archeage with higher presets.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1080p, the Medium preset at 144 FPS is the best balance of visual quality and performance. It offers a high refresh rate experience with a minimum of 122 FPS, ensuring smooth gameplay in most situations. Low settings at 162 FPS are only marginally faster and likely reduce visual fidelity significantly, so Medium is recommended for most users. High settings at 98 FPS are still playable, but the 46 FPS drop from Medium suggests that the visual improvements are not worth the performance cost for competitive play. Ultra at 67 FPS is acceptable for slower-paced gameplay, but it is the least advisable for action-heavy content.

For 1440p, Medium settings at 97 FPS are the recommended choice. The minimum of 82 FPS ensures that frame rates remain above 60 FPS in most scenarios, providing a fluid experience. Low settings at 109 FPS offer a slight advantage, but the visual trade-off is significant. High settings at 66 FPS are playable, but the margin for error is thinner, as frame drops could push it below 60 FPS. Ultra at 45 FPS is not recommended, as it falls below the threshold for smooth gameplay.

For 4K, the options are limited. Low settings at 62 FPS is the only preset that provides a playable experience, but it is still close to the 60 FPS line. Medium at 55 FPS is borderline, and High at 38 FPS and Ultra at 26 FPS are not suitable for general play. Users with 4K displays should either use Low settings or consider lowering the resolution to 1440p for a better experience. Overall, the data suggests that this combo is best utilized at 1080p or 1440p with Medium settings, where it delivers a strong balance of visual quality and frame rate, making it a solid choice for Archeage players who prioritize smooth performance over maximum graphical detail.