AMD Ryzen Embedded V2546

The AMD Ryzen Embedded V2546 is a 6-core, 12-thread Zen 2 processor built on TSMC's 7 nm process, targeting the desktop market segment with a 35 W TDP. Its average benchmark score of 14336 places it at the 73rd percentile of all CPUs, indicating it sits comfortably above the median performer. The data reveals a processor designed for efficiency and consistent throughput rather than raw flagship speed, with a benchmark profile that aligns closely with several mainstream desktop rivals.

How It Compares

The closest rival in the database is the Intel Core i5-8500, with an average score of 14332. The V2546's deltaPct of 0 means the two processors are effectively tied in overall benchmark performance. This is notable because the i5-8500 is a 6-core, 6-thread part, while the V2546 brings 12 threads to the table; the data shows that the V2546's additional threading does not translate into a decisive aggregate lead, suggesting the comparison is a near dead heat in mixed workloads.

Against the AMD Ryzen 3 7320C, which scores 14277, the V2546 holds a 0.4% advantage. This is a razor-thin margin that falls well within typical run-to-run variance. The V2546 offers two more cores and four more threads than the Ryzen 3 7320C, yet the benchmark results indicate that the latter's architecture compensates effectively, making the performance gap almost imperceptible in real-world terms.

The AMD Ryzen 3 4300G posts a higher average score of 14503, giving it a 1.2% lead over the V2546. This is a modest but consistent edge for the Ryzen 3 part, which is a 4-core, 8-thread processor. The data suggests that the Ryzen 3 4300G's higher clock behavior or per-core efficiency slightly outweighs the V2546's core-count advantage, resulting in a measurable, though small, performance deficit for the embedded chip.

The Intel Core i5-10400F rounds out the rival group with a score of 14168, placing it 1.2% behind the V2546. This is the largest gap in either direction among the nearest rivals. The i5-10400F is a 6-core, 12-thread processor, matching the V2546's thread count, but the benchmark data shows the AMD part edging ahead, likely due to the Zen 2 architecture's efficiency on the 7 nm process.

Power and Thermals

The V2546 is classified with a TDP of 35 W, which places it in a low-power tier for a 6-core, 12-thread processor. This TDP figure is significantly lower than what typical desktop CPUs with similar core counts demand, allowing for more flexible cooling solutions. The data indicates that a capable air cooler with a modest heat sink should be sufficient to manage thermals under sustained load, given the processor's constrained power envelope.

Because the TDP is 35 W, the processor is well-suited for compact or passively cooled systems where heat dissipation is a primary concern. The 7 nm process node from TSMC contributes to this efficiency, reducing the thermal density compared to larger process nodes. Benchmark results do not include thermal throttling data, but the low TDP suggests that the V2546 can maintain its boost clock of 3.95 GHz without requiring aggressive cooling setups.

This power class makes the V2546 a candidate for industrial or embedded applications where system size and acoustic noise are limiting factors. The 35 W TDP also implies that motherboard power delivery requirements are modest, though the processor remains socketed in AMD Socket FP6. The efficiency profile is a key differentiator, as it allows the V2546 to deliver near-desktop performance in a fraction of the power budget of higher-TDP rivals.

Single-Thread vs Multi-Thread Behavior

The V2546's single-thread performance is modest, as evidenced by a Cinebench R23 single-core score of 1158 and a PassMark single-thread score of 1609. These numbers place it in a mid-range tier, where it trails higher-clocked desktop parts but remains adequate for everyday responsiveness. The boost clock of 3.95 GHz is the primary driver here, and the data shows that the processor cannot match the peak single-core performance of more aggressive desktop chips.

Multi-thread performance is where the V2546 shows its strength, with a Cinebench R23 multi-core score of 8207 and a PassMark multithread score of 9656. The 6-core, 12-thread configuration scales well in parallel workloads, as seen in the PassMark integer math score of 30739 and floating-point math score of 18534. The data reveals a processor that is heavily biased toward throughput, with multi-core scores that are roughly seven times higher than single-core scores in Cinebench R23, indicating strong scaling across the 12 threads.

This split has practical implications for real workloads. Applications that rely on a few fast cores, such as older games or lightly threaded productivity tools, will see performance limited by the single-thread scores. Conversely, modern content creation tasks like video rendering, software compilation, and data analysis that can utilize all 12 threads will benefit from the multi-core throughput. The PassMark data compression score of 136097 and data encryption score of 8046 further confirm that the V2546 is well-optimized for parallel data processing tasks.

FAQ

Q: How does the Ryzen Embedded V2546 compare to the Intel Core i5-8500 in overall performance?

A: The two processors are effectively tied, with the V2546 showing a deltaPct of 0 compared to the i5-8500's average score of 14332. Both have an average benchmark score around 14336 and 14332, respectively.

Q: What is the TDP of the V2546 and what does it imply for cooling?

A: The V2546 has a TDP of 35 W, which is a low-power classification for a 6-core processor. This implies that a standard air cooler with a modest heat sink is likely sufficient, making it suitable for compact systems.

Q: What are the single-thread and multi-thread Cinebench R23 scores?

A: The V2546 scores 1158 in Cinebench R23 single-core and 8207 in multi-core. The multi-core score is significantly higher, demonstrating strong parallel scaling across its 12 threads.

Q: Does the V2546 support ECC memory?

A: Yes, the FACT PACK indicates that ECC memory is supported, which is a feature often valued in embedded and reliability-focused applications.

Q: How does the V2546 perform in data encryption tasks?

A: The PassMark data encryption score is 8046, which indicates a moderate level of encryption throughput. This is lower than its data compression score of 136097, suggesting better performance in compression workloads.

Q: What is the architecture and process node of the V2546?

A: The V2546 uses the Zen 2 architecture with the Renoir codename, built on a 7 nm process at TSMC. It has a die size of 156 mm² and contains 9,800 million transistors.

Who Should Consider It

For gaming workloads, the V2546 is a mixed proposition. The single-thread score of 1158 in Cinebench R23 is not exceptional, so frame rates in CPU-bound titles may be limited. However, the 12 threads and 6 cores provide enough headroom for modern games that utilize multiple threads, and the integrated Radeon Graphics with 384 SP offers a built-in display output for basic gaming or media use. Gamers prioritizing high refresh rates in e-sports titles would likely find the single-thread performance a bottleneck, but those building a compact, low-power gaming system for less demanding titles could find it adequate.

Content creators and professionals running parallel workloads are the primary beneficiaries of this processor. The multi-core scores, including the Cinebench R23 result of 8207 and PassMark multithread score of 9656, show strong throughput for video rendering, 3D modeling, and batch processing. The ECC memory support adds reliability for long-running tasks, and the 35 W TDP means these workloads can be processed in a system with modest cooling and power delivery, which is an advantage in dense or embedded deployments.

For office and general productivity use, the V2546 is a competent performer. The PassMark single-thread score of 1609 is sufficient for word processing, spreadsheet work, and web browsing, while the multi-thread capabilities handle background tasks and occasional parallel workloads without strain. The low TDP also makes it an excellent choice for silent office PCs or always-on systems where energy efficiency is prioritized. The data suggests that users who need a balance of throughput and efficiency, rather than raw single-core speed, will find the V2546 well-suited to their needs.