To The Core
This combination delivers exceptional performance with an average of 179 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 73 | 91 | 108 | 127 |
| 1440p QHD | 134 | 162 | 189 | 222 |
| 1080p Full HD | 195 | 242 | 278 | 332 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060, In-Depth Analysis
To The Core is an idle game that behaves less like a typical lightweight title and more like a demanding real-time renderer, based on the measured frame rates for the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 5060 combination. The data shows a setup that is heavily GPU-limited at higher resolutions but surprisingly CPU-bound at 1080p, creating a distinct performance profile across the three tested resolutions and four quality presets.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and consistent across all settings, revealing that the RTX 5060 becomes the primary bottleneck as pixel count rises. At Low settings, the average FPS falls from 332.2 at 1920x1080 to 222.2 at 2560x1440, a reduction of exactly 110 FPS, and then further down to 127.4 at 3840x2160. That represents a 61.7% decrease in performance from 1080p to 4K at Low, which is a substantial penalty that points directly at the GPU’s 8 GB GDDR7 memory and 128-bit bus being saturated by the higher pixel throughput. The 448.0 GB/s bandwidth is sufficient for 1440p but clearly strained at 4K, where the pixel rate of 119.9 GPixel/s becomes a limiting factor.
At Ultra settings, the scaling pattern intensifies. The average FPS drops from 194.5 at 1080p to 133.8 at 1440p, a 31.2% decline, and then to 72.7 at 4K, which is a 62.6% drop from the 1440p figure. This non-linear scaling is telling: the gap between 1440p and 4K at Ultra is far larger than the gap between 1080p and 1440p, indicating that the GPU’s texture rate of 299.6 GTexel/s and FP32 throughput of 19.18 TFLOPS are exhausted by the combination of high resolution and maxed-out settings. The 4K Ultra result of 72.7 FPS is the lowest measured point in the entire dataset, suggesting that this combo is not intended for 4K maxed-out play.
The scaling behavior also reveals a transition point. Between 1080p and 1440p, the average FPS loss across all settings is roughly 40-50%, but between 1440p and 4K, the loss accelerates to 60-65%. This suggests that 1440p is the sweet spot where the CPU and GPU are more balanced, while 4K pushes the RTX 5060 past its practical limits. The Ryzen 9 5900X, with its 12 cores and 24 threads, has ample headroom at 4K, so the resolution penalty is almost entirely attributable to the GPU’s memory subsystem and rasterization capabilities.
Settings Recommendations
The measured rows show a clear hierarchy across presets, and the data suggests that High settings offer the best balance of visual quality and performance for this combo. At 1080p, High delivers 241.8 FPS, which is only 35.8 FPS below Medium’s 277.6 but 47.3 FPS above Ultra’s 194.5. This indicates that the jump from High to Ultra carries a disproportionate cost, likely due to the additional shading work on the 3840 shading units and 120 tensor cores. The difference between Low and Medium at 1080p is 54.6 FPS, while the difference between Medium and High is 35.8 FPS, and between High and Ultra is 47.3 FPS. The diminishing returns are evident: Medium to High is the most efficient upgrade, while High to Ultra demands a 19.6% performance hit for what is presumably a marginal visual gain.
At 1440p, High produces 161.5 FPS, which is well above the 133.8 FPS of Ultra and still comfortably above the 189.1 FPS of Medium. The gap between High and Ultra at this resolution is 27.7 FPS, a 17.2% reduction, which is smaller than at 1080p but still significant. For users targeting 1440p, High is the recommended preset because it keeps the frame rate above 160 FPS while avoiding the steep Ultra penalty. Medium at 1440p yields 189.1 FPS, which is only 27.6 FPS higher than High, so the visual upgrade to High is likely worth the modest cost.
At 4K, no preset achieves a truly high refresh rate. High manages 91.4 FPS, which is playable but not ideal for competitive scenarios, while Ultra drops to 72.7 FPS. Low at 4K hits 127.4 FPS, which is the only 4K setting above 100 FPS, but the visual compromises are likely severe. The data suggests that High at 1440p is the optimal experience for this combo, providing 161.5 FPS, while 4K should be reserved for High or below if frame rate stability is a priority.
CPU Role
The AMD Ryzen 9 5900X is a 12-core, 24-thread processor based on the Zen 3 architecture, codenamed Vermeer, with a base clock of 3.70 GHz and a boost clock of 4.80 GHz. Its 64 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are typical for the platform. In general benchmarks, this CPU scores 33,150 in Cinebench R23 multi-core and 4,680 in single-core, placing it in the 90th percentile of all CPUs. Its average benchmark score of 39,453 is nearly identical to the AMD EPYC 4245P at 39,383 (0.2% difference) and slightly below the AMD Ryzen 7 PRO 8845HS at 39,747 (-0.7%).
In the context of To The Core, the CPU’s role is most apparent at 1080p Low settings, where the frame rate reaches 332.2 FPS. This high number suggests that the 12 cores are not fully utilized, as the game’s idle genre likely relies on a few primary threads. The single-thread performance of 941 in 3DMark single-thread and 2,202 in Geekbench single-core is adequate for this workload, but the boost clock of 4.80 GHz is the key factor in maintaining high frame rates at lower resolutions. The CPU’s 105 W TDP and 7 nm process node (TSMC) contribute to efficient operation, but the data does not show any thermal or power throttling effects on the measured FPS.
The difference between 1080p Low and 4K Low is 204.8 FPS, which is almost entirely GPU-bound. However, the CPU’s performance ceiling becomes visible at 1080p Ultra, where the frame rate of 194.5 FPS is still high but not as elevated as Low. This suggests that at lower resolutions, the CPU’s single-thread speed becomes a secondary factor, but the GPU remains the dominant constraint. The 3DMark 16-thread score of 9,075 and max-thread score of 10,075 indicate strong multi-threaded capability, but To The Core does not appear to scale with core count, as evidenced by the 332.2 FPS at Low not being significantly higher than the 277.6 FPS at Medium at the same resolution.
How This Combo Ranks
The AMD Ryzen 9 5900X and NVIDIA GeForce RTX 5060 combination ranks 895th out of 1,756 tested combos in To The Core, placing it in the 49th percentile of all configurations. This mid-pack ranking is somewhat surprising given the individual component strengths, but it reflects the game’s specific demands. The RTX 5060 itself ranks in the 73rd percentile of all GPUs, with an average benchmark score of 30,109, which is nearly identical to the AMD Radeon RX 7700 XT at 30,097 (0% difference). The CPU’s 90th percentile ranking is higher, but the combo’s overall position suggests that the GPU is the limiting factor in most scenarios.
The ranking of 895 out of 1,756 means that 861 other combos perform better in this game, which is a significant number. This is likely due to the RTX 5060’s 8 GB VRAM and 128-bit memory bus, which are modest for a 50-series card. The GPU’s nearest rivals include the AMD Radeon RX 7700 XT (0% delta) and the NVIDIA Tesla M60 (0.5% delta), but the latter is a compute-oriented card, not a gaming part. The RTX 5070 Mobile is only 0.6% ahead, indicating that this desktop card is closely matched with a mobile variant, which further highlights its mid-range positioning.
For users comparing this combo to others, the data shows that the CPU is not the bottleneck. The Ryzen 9 5900X’s nearest rivals, such as the Intel Core i7-13700F (0.9% ahead) and Intel Core i7-13700 (-1% behind), have similar average scores, so the CPU choice has minimal impact on the final FPS. The ranking is therefore driven by the GPU, and any combo with a stronger graphics card would likely rank higher, regardless of the CPU.
GPU Role
The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with a GB206 chip, fabricated on a 5 nm process at TSMC with 21,900 million transistors on a 181 mm² die. Its base clock is 2280 MHz with a boost clock of 2497 MHz, and it features 8 GB of GDDR7 memory on a 128-bit bus, providing 448.0 GB/s of bandwidth. The memory clock is 1750 MHz, which translates to 28 Gbps effective. The GPU has 3,840 shading units, 120 TMUs, and 48 ROPs, along with 30 RT cores and 120 tensor cores. Its FP32 performance is 19.18 TFLOPS, and it supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
In To The Core, the GPU’s role is dominant at 4K, where the frame rates drop significantly. At 4K High, the average FPS is 91.4, which is 70.1 FPS lower than at 1440p High (161.5). This 43.4% reduction is directly attributable to the GPU’s pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s, which are insufficient for 4K at high settings. The 8 GB VRAM is also a concern, as the game likely exceeds this capacity at 4K Ultra, leading to potential texture swapping. The measured 4K Ultra FPS of 72.7 supports this theory, as it is the lowest score in the dataset.
The RTX 5060’s benchmark scores align with its gaming performance. Its PassMark G3D score of 20,891 and Geekbench OpenCL score of 120,785 place it in the 73rd percentile of all GPUs. The nearest rival, the AMD Radeon RX 7700 XT, has an identical average score of 30,097, but the RTX 5060’s 5 nm process node and GDDR7 memory give it a modern feature set. The GPU’s 145 W TDP and suggested 300 W PSU are modest, but the data does not indicate any power-related performance issues in this game.
Measured FPS Breakdown
At 1920x1080, the measured average FPS ranges from 332.2 at Low to 194.5 at Ultra. Low is the fastest, with Medium at 277.6, High at 241.8, and Ultra at 194.5. The gap between Low and Ultra is 137.7 FPS, a 41.4% reduction, which shows that Ultra settings impose a substantial load on the GPU. At 2560x1440, the scores drop to 222.2 at Low, 189.1 at Medium, 161.5 at High, and 133.8 at Ultra. The difference between Low and Ultra at 1440p is 88.4 FPS, a 39.8% reduction, which is proportionally similar to 1080p. At 3840x2160, the scores are 127.4 at Low, 107.9 at Medium, 91.4 at High, and 72.7 at Ultra. The Low-to-Ultra gap is 54.7 FPS, a 42.9% reduction, which is the largest proportional penalty across all resolutions.
The data reveals a consistent pattern: Ultra settings cost roughly 40-43% of the frame rate compared to Low, regardless of resolution. However, the absolute FPS numbers tell a different story. At 1080p, even Ultra achieves 194.5 FPS, which is above most display refresh rates. At 1440p, High achieves 161.5 FPS, which is excellent for high-refresh monitors. At 4K, only Low exceeds 120 FPS, with 127.4 FPS, while High and Ultra are below 100 FPS. The measured FPS breakdown confirms that this combo is best suited for 1080p and 1440p gaming, with 4K being a compromise unless settings are reduced to Low or Medium.
The FPS deltas between resolutions are also notable. For High settings, the drop from 1080p to 1440p is 80.3 FPS (from 241.8 to 161.5), and from 1440p to 4K is 70.1 FPS (from 161.5 to 91.4). For Ultra, the drops are 60.7 FPS (194.5 to 133.8) and 61.1 FPS (133.8 to 72.7), respectively. These numbers indicate that the GPU’s performance scales nearly linearly with pixel count, but the absolute frame rates at 4K are too low for a smooth experience. The RTX 5060’s 19.18 TFLOPS of FP32 compute is not sufficient to maintain high frame rates at 4K Ultra, and the 448.0 GB/s bandwidth becomes a limiting factor at higher resolutions.
Hardware Specifications
AMD Ryzen 9 5900X
NVIDIA GeForce RTX 5060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 5900X + NVIDIA GeForce RTX 5060 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 127.4 |
| 3840x2160 | Medium | 107.9 |
| 3840x2160 | High | 91.4 |
| 3840x2160 | Ultra | 72.7 |
| 2560x1440 | Low | 222.2 |
| 2560x1440 | Medium | 189.1 |
| 2560x1440 | High | 161.5 |
| 2560x1440 | Ultra | 133.8 |
| 1920x1080 | Low | 332.2 |
| 1920x1080 | Medium | 277.6 |
| 1920x1080 | High | 241.8 |
| 1920x1080 | Ultra | 194.5 |
To The Core with Ryzen 9 5900X + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 5060 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with Ryzen 9 5900X + RTX 5060
Explore FPS benchmarks for other games using this same hardware combination.