Thief
This combination delivers exceptional performance with an average of 123 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 67 | 73 | 94 | 123 |
| 1440p QHD | 116 | 118 | 135 | 150 |
| 1080p Full HD | 137 | 138 | 154 | 169 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Thief with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis
The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 4070 Ti SUPER delivers a compelling performance profile in Thief, a 2014 stealth title. The measured data reveals a system that is heavily GPU-bound at higher resolutions but shows signs of CPU influence at 1080p, with the combination ranking in the 84th percentile of tested configurations. This analysis breaks down the FPS measurements, component roles, and settings recommendations based solely on the provided data.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and consistent across all settings, indicating the GPU is the primary limiting factor as pixel count increases. At Low settings, the average frame rate falls from 169.2 FPS at 1920x1080 to 122.6 FPS at 3840x2160, a reduction of 46.6 FPS or roughly 27.5%. The scaling is even more pronounced at Medium settings, where 153.6 FPS at 1080p drops to 94.1 FPS at 4K, a 59.5 FPS decline (38.7%). This pattern strongly suggests that the RTX 4070 Ti SUPER’s compute and memory bandwidth are being saturated as resolution climbs, while the CPU has ample headroom.
At High settings, the resolution scaling tells a slightly different story. The transition from 1920x1080 (138.3 FPS) to 2560x1440 (118.3 FPS) shows a 20 FPS drop, but moving from 1440p to 4K (72.9 FPS) results in a much larger 45.4 FPS decline. This non-linear behavior implies that at 1440p High, the system is still somewhat balanced, but at 4K, the GPU’s fill rate and memory bandwidth become the absolute bottleneck. The gap between Low and Ultra settings widens dramatically at 4K: 122.6 FPS versus 67.2 FPS, a 55.4 FPS spread, compared to just 32.1 FPS at 1080p (169.2 vs 137.1). This widening gap confirms that higher resolutions amplify the cost of each graphical feature, pushing the GPU harder.
The data shows that 1080p is clearly CPU-bound in some scenarios. At Low settings, the 169.2 FPS average is likely near the engine’s or CPU’s limit, as increasing resolution to 1440p only drops the frame rate to 149.6 FPS—a modest 19.6 FPS penalty. This relatively small drop suggests the CPU is handling the game logic and draw calls efficiently, but the GPU is not yet fully taxed. By contrast, the jump from 1440p to 4K at Low settings incurs a 27 FPS penalty, signaling the GPU is now the limiting component. For players targeting 4K, the data implies that even Low settings will not produce 144 FPS, but 122.6 FPS is still highly playable for a stealth title.
CPU Role
The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, with a base clock of 3.40 GHz and a boost clock of 4.90 GHz. Its 64 MB of L3 cache and dual-channel DDR4 memory support (with 51.2 GB/s bandwidth) provide substantial headroom for gaming workloads. In synthetic benchmarks, the CPU achieves a Cinebench R23 multi-core score of 38607 and a single-core score of 5450, placing it in the 93rd percentile of all CPUs. Its nearest rival, the Intel Core i5-14600K, scores 49166 on average, a mere 0.2% delta, indicating the 5950X is essentially performance-equivalent in these aggregate tests.
In Thief, the CPU’s role is evident in the 1080p Low settings result of 169.2 FPS. This is the highest measured average across all resolutions and settings, and it is notably higher than the 1440p Low result of 149.6 FPS. The relatively small gap between 1080p and 1440p Low (19.6 FPS) suggests that the CPU is capable of feeding the GPU more frames, but the GPU’s workload is lighter at lower resolutions. The 16 cores and 32 threads are likely overkill for this 2014 title, but the high boost clock of 4.90 GHz ensures strong single-thread performance, which is often more critical for older games. The 3DMark single-thread score of 944 and PassMark single-thread score of 3470 corroborate this strength.
Benchmark results indicate the CPU is not a bottleneck at 4K. At 3840x2160 Ultra, the system averages 67.2 FPS, and at 4K Low, it hits 122.6 FPS. If the CPU were the limiting factor, we would expect these numbers to be closer together regardless of settings. Instead, the wide spread across settings at 4K points squarely at the GPU. The Ryzen 9 5950X’s 105W TDP and AM4 socket are legacy specifications, but its performance in this game is more than adequate. The data suggests that for Thief, the CPU’s role is to provide a stable platform that never holds back the GPU, even at the highest frame rates observed.
GPU Role
The NVIDIA GeForce RTX 4070 Ti SUPER is built on the Ada Lovelace architecture with 8448 shading units and 66 RT cores. It features 16 GB of GDDR6X memory on a 256-bit bus, delivering 672.3 GB/s of bandwidth. The boost clock of 2610 MHz and base clock of 2340 MHz drive a pixel rate of 250.6 GPixel/s and a texture rate of 689.0 GTexel/s. In synthetic benchmarks, the GPU scores 31811 in PassMark G3D and 5569 in 3DMark Steel Nomad DX12, placing it in the 86th percentile of all GPUs. Its nearest rival, the NVIDIA CMP 50HX, scores 49071 on average, a 0.7% delta, showing the 4070 Ti SUPER is competitive within its class.
The GPU’s memory subsystem is critical for Thief at high resolutions. The 16 GB VRAM capacity is not likely to be a constraint, but the 672.3 GB/s bandwidth is heavily utilized at 4K. The measured FPS at 3840x2160 shows a clear hierarchy: Medium (94.1 FPS), High (72.9 FPS), and Ultra (67.2 FPS). The 26.9 FPS difference between Medium and Ultra at 4K indicates that the GPU’s shading units and ROPs are the limiting factors when quality settings increase. The 96 ROPs are responsible for pixel output, and the data suggests they are saturated at 4K Ultra, producing the lowest average of 67.2 FPS.
Interestingly, the GPU’s performance at 1440p is more balanced. At 2560x1440, the range from Low (149.6 FPS) to Ultra (115.9 FPS) is 33.7 FPS, which is narrower than the 55.4 FPS spread at 4K. This indicates that at 1440p, the GPU has enough bandwidth and compute to handle the increased settings without a dramatic penalty. The 4070 Ti SUPER’s FP32 performance of 44.10 TFLOPS is more than sufficient for this older title, and the data shows it can deliver 115.9 FPS at 1440p Ultra, which is a smooth experience. The GPU’s 285W TDP and triple-slot cooler are specifications, but the benchmark results confirm its role as the dominant performance driver in this configuration.
How This Combo Ranks
The AMD Ryzen 9 5950X and NVIDIA GeForce RTX 4070 Ti SUPER combination ranks 268th out of 1642 tested combos in Thief, placing it in the top 16.3% of all systems. This is a strong showing, but not a top-tier result, likely because the CPU is a generation old and the GPU, while powerful, is not the absolute fastest available. The rank implies that a significant number of combinations outperform this setup, likely due to newer CPUs with higher single-thread performance or GPUs with more raw compute.
The combo’s rank is consistent with its component percentiles. The CPU is in the 93rd percentile, and the GPU is in the 86th percentile, but the combined rank of 268/1642 suggests the pairing is slightly less than the sum of its parts. This could be due to the game’s age and its reliance on single-thread performance, where the 5950X’s 4.90 GHz boost clock is good but not exceptional compared to newer Intel offerings. The nearest CPU rival, the Intel Core i5-14600K, has a similar average benchmark score (49166 vs 49062), but in a game like Thief, the i5’s higher turbo frequencies could yield better frame rates.
The measured FPS data supports the rank. At 1080p Ultra, the combo achieves 137.1 FPS, which is high but not exceptional for a modern high-end system. At 4K Ultra, the 67.2 FPS average is playable but not competitive with top-tier combos that might exceed 100 FPS. The data indicates that this combo is best suited for 1440p gaming, where it delivers 115.9 FPS at Ultra, a figure that would place it in the upper echelon of systems. The rank of 268 suggests that for Thief, this is a solid mid-to-high-tier performer, but not a leaderboard-topping configuration.
FAQ
*Q: What is the best resolution for this combo in Thief?*
A: The data shows the highest average FPS at 1920x1080, with 169.2 FPS on Low settings. However, at 2560x1440 Ultra, the system still achieves 115.9 FPS, indicating 1440p is the sweet spot for high quality and high frame rates.
Q: How does this combo perform at 4K Ultra settings?
A: At 3840x2160 with Ultra settings, the average FPS is 67.2, which is the lowest measured value across all resolutions and settings. This is still playable for a stealth game but indicates the GPU is the limiting factor.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: The data suggests the CPU is likely the limiting factor at 1080p Low, where the system hits 169.2 FPS. The small drop to 149.6 FPS at 1440p Low implies the CPU is near its limit, while the GPU has headroom.
*Q: Does the RTX 4070 Ti SUPER have enough VRAM for Thief?*
A: The GPU has 16 GB of GDDR6X memory, but the game is from 2014 and likely does not require that much. The bandwidth of 672.3 GB/s is more relevant, and the data shows no VRAM-related stutters or anomalies.
Q: How does this combo rank against all tested systems?
A: The combo ranks 268th out of 1642 tested configurations, placing it in the top 16.3%. This is a strong result, but not a top-tier ranking.
Q: What is the difference between High and Ultra settings at 1440p?
A: At 2560x1440, High settings yield 118.3 FPS, while Ultra settings yield 115.9 FPS. The 2.4 FPS difference is minimal, suggesting that Ultra is worth enabling for better visuals with negligible performance cost.
Settings Recommendations
Based on the measured FPS data, the best experience for this combo in Thief is at 2560x1440 with Ultra settings. The system achieves 115.9 FPS at this configuration, which is well above the 60 FPS threshold for smooth gameplay and maintains high visual fidelity. The delta between High (118.3 FPS) and Ultra (115.9 FPS) at 1440p is only 2.4 FPS, meaning there is no practical reason to drop to High settings for a performance gain. This is the optimal balance of quality and speed.
For players with 4K displays, the data suggests using Medium settings, which yield 94.1 FPS at 3840x2160. This is a significant improvement over High (72.9 FPS) and Ultra (67.2 FPS), and the 26.9 FPS gain from High to Medium is substantial. While 4K Medium may not look as polished as Ultra, the smoothness of 94.1 FPS is preferable for a stealth game where reactions matter. Low settings at 4K (122.6 FPS) are also viable, but the visual compromise is likely too severe for most players.
At 1920x1080, the data shows that all settings produce high frame rates, from 137.1 FPS at Ultra to 169.2 FPS at Low. The recommendation here is to use Ultra settings, as the 32.1 FPS penalty from Low to Ultra is acceptable given the already-high baseline. For competitive play, Low settings could be used to maximize FPS, but the difference between 137.1 and 169.2 FPS is unlikely to be perceptible in a majority of situations. The data strongly favors 1440p Ultra as the default choice, with 4K Medium as a secondary option for those prioritizing resolution.
Measured FPS Breakdown
The measured data provides a complete matrix of average FPS across three resolutions and four settings tiers. At 1920x1080, the system delivers 169.2 FPS on Low, 153.6 FPS on Medium, 138.3 FPS on High, and 137.1 FPS on Ultra. This shows a 32.1 FPS spread from Low to Ultra, with the largest single drop occurring between Medium and High (15.3 FPS). The 1080p results indicate the CPU’s high boost clock of 4.90 GHz is effective, as the frame rates are consistently above 137 FPS.
At 2560x1440, the averages are 149.6 FPS on Low, 135.1 FPS on Medium, 118.3 FPS on High, and 115.9 FPS on Ultra. The spread here is 33.7 FPS, slightly wider than at 1080p. The transition from Medium to High incurs a 16.8 FPS penalty, while High to Ultra is only 2.4 FPS. This suggests that the High preset is a plateau, with Ultra offering marginal visual improvements at a small cost. The 1440p results are the most balanced, with no single setting causing a disproportionate FPS loss.
At 3840x2160, the averages are 122.6 FPS on Low, 94.1 FPS on Medium, 72.9 FPS on High, and 67.2 FPS on Ultra. The spread is 55.4 FPS, the largest of any resolution. The drop from Low to Medium is 28.5 FPS, from Medium to High is 21.2 FPS, and from High to Ultra is 5.7 FPS. This pattern reveals that 4K is extremely sensitive to settings changes, with the GPU’s bandwidth and shading units being the primary constraints. The 67.2 FPS at Ultra is the only measured result below 70 FPS, indicating that 4K Ultra is the most demanding configuration for this combo.
Hardware Specifications
AMD Ryzen 9 5950X
NVIDIA GeForce RTX 4070 Ti SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 5950X + NVIDIA GeForce RTX 4070 Ti SUPER in Thief
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 122.6 |
| 3840x2160 | Medium | 94.1 |
| 3840x2160 | High | 72.9 |
| 3840x2160 | Ultra | 67.2 |
| 2560x1440 | Low | 149.6 |
| 2560x1440 | Medium | 135.1 |
| 2560x1440 | High | 118.3 |
| 2560x1440 | Ultra | 115.9 |
| 1920x1080 | Low | 169.2 |
| 1920x1080 | Medium | 153.6 |
| 1920x1080 | High | 138.3 |
| 1920x1080 | Ultra | 137.1 |
Thief with Ryzen 9 5950X + Other GPUs
See how Thief performs with the same CPU but different graphics cards.
Thief with RTX 4070 Ti SUPER + Other CPUs
See how Thief performs with the same GPU but different processors.
Other Games with Ryzen 9 5950X + RTX 4070 Ti SUPER
Explore FPS benchmarks for other games using this same hardware combination.