Fivem

# Fivem with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 4070 Ti SUPER

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 4070 Ti SUPER delivers a broad performance envelope in Fivem, spanning from triple-digit frame rates at 1080p to playable 4K results. This 16-core, 32-thread Zen 3 processor with a 4.90 GHz boost clock sits in the 93rd percentile of all CPUs, while the Ada Lovelace GPU with 8448 shading units and 16 GB of GDDR6X memory ranks in the 86th percentile of all GPUs. Benchmark data shows this combination ranks 171st out of 1792 tested combos in Fivem, placing it comfortably in the top 10 percent of systems tested.

Resolution Scaling

The measured FPS data reveals how this combo scales across resolutions, with the drop from 1080p to 4K being substantial but not catastrophic. At High settings, the average frame rate falls from 191.3 FPS at 1920x1080 to 126.8 FPS at 2560x1440, then to 70.1 FPS at 3840x2160. That represents a 33.7% reduction from 1080p to 1440p, and a further 44.7% reduction from 1440p to 4K. The scaling pattern indicates that at 1080p, the CPU is heavily involved in frame delivery, while at 4K, the GPU becomes the primary bottleneck.

Looking at Low settings, the trend is even more pronounced. The system produces 307 FPS at 1080p, dropping to 205.1 FPS at 1440p and 114.1 FPS at 4K. The 1080p Low result of 307 FPS is the highest measured value across all configurations, suggesting this combo can push well beyond typical display refresh rates when graphical load is minimal. The gap between Low and Ultra settings widens as resolution increases, which is expected behavior for a GPU-bound scenario.

The Ultra preset tells a different story. At 1080p Ultra, the system manages 152 FPS, which falls to 99.9 FPS at 1440p and 55.2 FPS at 4K. The 4K Ultra result of 55.2 FPS is the lowest measured value, indicating that this configuration is suitable for 4K gaming but not at maximum settings. The data suggests that 4K gaming is viable with this pairing, provided settings are adjusted downward from Ultra. Medium settings at 4K yield 86.5 FPS, which is a more comfortable margin for smooth gameplay.

How This Combo Ranks

This specific CPU-GPU pairing achieves a combo rank of 171 out of 1792 tested combinations in Fivem. That places it in the top 9.5 percent of all tested systems, which is an impressive result given the breadth of hardware combinations covered. The ranking reflects not just raw GPU power but also the CPU's ability to feed frames efficiently in a multiplayer environment like Fivem, where server-side scripting and player counts can create variable CPU loads.

The Ryzen 9 5950X itself sits at the 93rd percentile of all CPUs, with an average benchmark score of 49062. Its nearest rival, the Intel Core i5-14600K, scores 49166, a delta of just -0.2 percent, meaning these two processors are essentially performance equals in aggregate benchmarks. The Intel Core i5-14600KF is marginally ahead at 49367, a -0.6 percent delta, while the AMD EPYC 4345P leads with 49595 at -1.1 percent delta. The Intel Xeon Gold 5318H trails slightly at 48698, a 0.7 percent delta.

On the GPU side, the RTX 4070 Ti SUPER posts an average benchmark score of 48704, placing it at the 86th percentile of all GPUs. Its nearest rival, the NVIDIA CMP 50HX, scores 49071 with a -0.7 percent delta. The RTX A2000 scores 47915 with a 1.6 percent delta, while the RTX A1000 Mobile scores 47743 with a 2.0 percent delta. The Intel Arc A550M leads at 49737 with a -2.1 percent delta. These comparisons show that the GPU is competitive with its immediate peers, though it does not dominate them.

FAQ

Q: Can this combo handle 4K gaming in Fivem?

A: Yes, but with caveats. At 4K High settings, the average FPS is 70.1, while Medium settings yield 86.5 FPS. Ultra settings drop to 55.2 FPS, so players targeting 60 FPS at 4K should use Medium or High presets.

Q: What is the best resolution for high refresh rate monitors?

A: At 1080p, the system produces 191.3 FPS on High and 244.2 FPS on Medium, which supports 240 Hz displays. At 1440p, High settings deliver 126.8 FPS, which is sufficient for 120 Hz or 144 Hz monitors.

Q: How does the Ryzen 9 5950X compare to the Intel Core i5-14600K?

A: The Ryzen 9 5950X has an average benchmark score of 49062, while the Intel Core i5-14600K scores 49166, a delta of -0.2 percent. This indicates they perform nearly identically in aggregate benchmarks.

Q: Is the RTX 4070 Ti SUPER a strong performer relative to its peers?

A: The GPU scores 48704 on average, placing it at the 86th percentile of all GPUs. Its nearest rival, the NVIDIA CMP 50HX, scores 49071, which is 0.7 percent higher, showing the 4070 Ti SUPER is competitive but not the top of its class.

Q: What settings should I use for competitive play?

A: At 1080p Low settings, the system reaches 307 FPS, which is the highest measured result. This suggests competitive players should favor Low or Medium presets to maximize frame rates.

Q: Does the CPU bottleneck the GPU at lower resolutions?

A: The data suggests CPU involvement is significant at 1080p, given the large FPS differences between settings. At 1080p Low, the system hits 307 FPS, which indicates the CPU can push frames well beyond typical display capabilities.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the system delivers 307 FPS on Low, 244.2 FPS on Medium, 191.3 FPS on High, and 152 FPS on Ultra. The gap between Low and Ultra is 155 FPS, showing that graphical settings have a major impact at this resolution.

At 2560x1440, performance scales down proportionally. Low settings produce 205.1 FPS, Medium delivers 161.8 FPS, High achieves 126.8 FPS, and Ultra manages 99.9 FPS. The difference between Low and Ultra narrows to 105.2 FPS, indicating the GPU is becoming more of a limiting factor.

At 3840x2160, the results show a more compressed range. Low settings yield 114.1 FPS, Medium produces 86.5 FPS, High achieves 70.1 FPS, and Ultra delivers 55.2 FPS. The spread between Low and Ultra is 58.9 FPS, which confirms that 4K is heavily GPU-bound. The 4K results are all playable, but only Low and Medium settings maintain frame rates above 86 FPS, which is important for smooth gameplay on standard 60 Hz displays.

The progression across settings at each resolution shows consistent behavior: Low is fastest, Ultra is slowest, and the differences are more pronounced at lower resolutions. This pattern is typical for a system where the CPU has sufficient headroom to feed the GPU at 1080p but is not the primary constraint at 4K.

Settings Recommendations

Based on the measured data, the optimal settings preset depends on the target resolution and desired frame rate. For 1080p gaming, the High preset at 191.3 FPS offers an excellent balance of visual quality and performance, easily supporting 144 Hz or 165 Hz displays. Players with 240 Hz monitors may prefer Medium at 244.2 FPS, which still provides solid visual fidelity. The Low preset at 307 FPS is best reserved for competitive scenarios where maximum frame rate is the priority.

At 1440p, the High preset at 126.8 FPS is the recommended choice for most users, as it supports high refresh rate monitors while maintaining good image quality. The Medium preset at 161.8 FPS is a strong alternative for those who prioritize frame rate over visual details. The Ultra preset at 99.9 FPS is viable for 100 Hz displays, though the drop below 100 FPS may be noticeable to some players. Low settings at 205.1 FPS are excessive for most 1440p monitors and sacrifice too much visual quality for the frame rate gain.

For 4K gaming, the Medium preset at 86.5 FPS is the best overall choice, providing smooth gameplay on 60 Hz displays with a comfortable margin. The High preset at 70.1 FPS is also playable and offers better visual quality, but the lower frame rate may be noticeable in fast-paced scenes. The Low preset at 114.1 FPS is ideal for 4K monitors with higher refresh rates, though it requires accepting reduced graphical fidelity. The Ultra preset at 55.2 FPS is borderline for 60 Hz displays and is not recommended for consistent smoothness.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor from the 5000 series, built on TSMC's 7 nm process with Zen 3 architecture. It has a base clock of 3.40 GHz and a boost clock of 4.90 GHz, with a 105 W TDP. The CPU supports DDR4 memory in dual-channel configuration with a bandwidth of 51.2 GB/s, and it uses the AMD Socket AM4 platform with PCIe Gen 4 providing 20 lanes.

In Fivem, the CPU's role is significant at lower resolutions where frame rates are high. The measured results show that at 1080p Low, the system achieves 307 FPS, which suggests the 16-core processor can handle the game's multi-threaded workload effectively. The 3dmark benchmark results support this, with a max-thread score of 11597 and a single-thread score of 944. The Cinebench R23 multicore score of 38607 and single-core score of 5450 indicate strong performance in both lightly-threaded and heavily-threaded scenarios.

The CPU's 64 MB of L3 cache and 8,300 million transistors contribute to its ability to maintain high frame rates in multiplayer environments like Fivem, where many players and scripted events can create variable CPU loads. The processor's percentile rank of 93 against all CPUs confirms it is a top-tier option for this game. While the GPU is clearly the limiting factor at 4K, the CPU's headroom at 1080p and 1440p ensures that it does not become a bottleneck for the RTX 4070 Ti SUPER, allowing the combo to perform at its full potential across the resolution range.