Thief

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 3070 Ti delivers a robust performance profile in Thief, a 2014 stealth title. Benchmark results show this combination handles the game with significant headroom at most settings, with the data indicating a clear shift in bottleneck behavior as resolution scales. This analysis breaks down the measured FPS across resolutions and settings, providing a detailed look at how this specific hardware pairing performs.

FAQ

Q: What is the average frame rate at 1080p with Ultra settings?

A: The measured average FPS at 1920x1080 with Ultra settings is 122.4. This is the most demanding preset tested at that resolution, yet it remains well above the 60 FPS threshold for smooth gameplay.

Q: How does the combo rank among all tested systems in this game?

A: This specific combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3070 Ti ranks 533rd out of 1642 tested combos in Thief. This places it in the upper third of all configurations tested for this title.

Q: What is the performance difference between High and Ultra settings at 1440p?

A: At 2560x1440, the High preset averages 87.1 FPS, while the Ultra preset averages 84.7 FPS. The difference is a modest 2.4 FPS, indicating that the Ultra preset does not impose a significant additional load at this resolution.

Q: Is the Ryzen 5 7500F a capable processor for this game based on the data?

A: Yes. The CPU's benchmark scores, such as a Cinebench R23 multicore score of 22799 and a single-core score of 3218, are high. The data suggests the processor provides ample headroom, as the FPS scaling from 1080p to 4K shows the GPU becoming the primary limiting factor.

Q: What is the lowest average FPS recorded in the entire dataset?

A: The lowest average FPS is 49.2, which occurs at the 4K resolution (3840x2160) with the Ultra settings preset. This is the only configuration in the dataset that dips below 60 FPS.

Q: How much faster is the Low preset compared to Ultra at 4K?

A: At 3840x2160, the Low preset achieves an average of 89.7 FPS, while Ultra averages 49.2 FPS. This represents a performance increase of 40.5 FPS, or roughly 82% higher frame rate when using the Low preset.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is the central component in this combo for rendering Thief. It features 8 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 608.3 GB/s. The card's architecture is Ampere, built on an 8 nm process, and it includes 6144 shading units. Its boost clock is rated at 1770 MHz, with a base clock of 1575 MHz.

The GPU's role becomes increasingly critical as resolution increases. At 1920x1080, the FPS is exceptionally high across all settings, from 190.3 FPS on Low to 122.4 FPS on Ultra. This suggests the GPU is not fully saturated at this resolution. However, the data shows a stark change at 3840x2160, where the Ultra preset drops to 49.2 FPS. This indicates that the 4K resolution, combined with the highest settings, places a substantial load on the RTX 3070 Ti's 8 GB frame buffer and compute units. The VRAM capacity appears to be a potential constraint at 4K Ultra, as the performance drop is more pronounced than at lower resolutions. The data implies that while the GPU is powerful enough for high-refresh 1080p and 1440p gaming, it is pushed to its limits at 4K with maximum settings in Thief.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3070 Ti holds a rank of 533 out of 1642 tested combos in Thief. This position places it in the upper 32% of all configurations benchmarked for this game. This ranking is a strong indicator of overall performance, but it is important to contextualize it with the component's individual standings.

The RTX 3070 Ti GPU has a percentile rank of 74 against all GPUs, with an average benchmark score of 30849. Its nearest rivals in the database include the AMD Radeon RX 6700 (with a deltaPct of -0.8) and the AMD Radeon RX 590 GME (with a deltaPct of 0.3). This indicates the GPU is positioned competitively within its performance class. The Ryzen 5 7500F CPU, meanwhile, has a percentile rank of 82 against all CPUs, with an average benchmark score of 24993. Its nearest rival, the Intel Core i7-11850H, is only 0.1% behind, confirming the CPU's strong standing.

The combo's rank of 533 suggests that while both components are individually capable, their combined performance in Thief is good, but not top-tier. The data implies that the GPU is the limiting factor in more demanding scenarios, which is typical for a pairing where the CPU offers high single-threaded performance. The benchmark results indicate that this system is well-balanced for achieving high frame rates at 1080p and 1440p, but it is not among the elite configurations for 4K Ultra play.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance. At 1920x1080, the system demonstrates excellent capability across all presets. The Low preset yields an average of 190.3 FPS, which is remarkably high. Moving up the settings ladder, Medium averages 164.9 FPS, High averages 125.8 FPS, and Ultra averages 122.4 FPS. The difference between High and Ultra is a mere 3.4 FPS, suggesting that the Ultra preset has diminishing returns at this resolution.

At 2560x1440, performance remains strong. The Low preset averages 152.9 FPS, a significant 37.4 FPS drop from 1080p Low, indicating the GPU is starting to work harder. Medium averages 115.4 FPS, High averages 87.1 FPS, and Ultra averages 84.7 FPS. Again, the gap between High and Ultra is minimal, at 2.4 FPS. This resolution provides a good balance between visual fidelity and frame rate.

At 3840x2160, the demands on the GPU become clear. The Low preset still delivers a playable 89.7 FPS, but Medium drops to 69.8 FPS. High averages 55.1 FPS, and Ultra falls to 49.2 FPS. This is the only resolution where any preset dips below the 60 FPS mark. The data shows a clear pattern: the RTX 3070 Ti is capable of maintaining high frame rates at 1080p and 1440p, but the 4K resolution, especially with higher settings, pushes it beyond its comfort zone.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals the nature of the system's bottleneck. Moving from 1920x1080 to 2560x1440 on the Low preset, the frame rate drops from 190.3 FPS to 152.9 FPS, a decrease of 19.6%. However, moving from 1440p to 4K on the same Low preset, the FPS drops from 152.9 to 89.7, a much steeper 41.3% decline.

This pattern intensifies with higher settings. On the Ultra preset, the drop from 1080p (122.4 FPS) to 1440p (84.7 FPS) is 30.8%, and the drop from 1440p to 4K (49.2 FPS) is 41.9%. The data clearly shows that the performance penalty for increasing resolution is not linear. The large drop-offs when moving to 3840x2160 indicate that the GPU is the limiting component.

The Ryzen 5 7500F, with its high single-core performance (Cinebench R23 single-core score of 3218), is likely providing enough data to the GPU at 1080p and 1440p to avoid a CPU bottleneck. However, at 4K, the sheer pixel count and shading requirements overwhelm the RTX 3070 Ti, making the GPU the definitive performance constraint. The scaling behavior suggests that for this game, the CPU has significant headroom, and the system's 4K performance is entirely dependent on the GPU's capabilities.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1920x1080, the Ultra preset is the clear choice, as it delivers an average of 122.4 FPS. The negligible difference between High (125.8 FPS) and Ultra (122.4 FPS) means users can enable the highest preset without sacrificing meaningful performance.

For 2560x1440, the High preset offers an excellent balance, with an average of 87.1 FPS. The Ultra preset is also viable at 84.7 FPS, but the difference is so small that the High preset might be preferred for slightly better stability. The Medium preset at 115.4 FPS is a good option for those who prioritize frame rate over visual quality.

For 3840x2160, the data suggests that the High preset (55.1 FPS) is not ideal for a smooth experience. The Medium preset, averaging 69.8 FPS, provides a better balance and is likely the highest setting that can maintain a consistent 60+ FPS experience. The Low preset at 89.7 FPS is the best choice for maximum smoothness, but it sacrifices significant visual fidelity. The Ultra preset at 49.2 FPS is not recommended for playable performance at 4K. The data implies that for a 4K experience, users should set the preset to Medium to achieve a good compromise between visual quality and frame rate.

CPU Role

The AMD Ryzen 5 7500F plays a supporting role in this combo, providing the processing power to feed the RTX 3070 Ti. It is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. Its 65 W TDP and 5 nm process node make it an efficient part. The CPU has 32 MB of shared L3 cache and supports DDR5 memory.

The benchmark data shows that the CPU is not a limiting factor in Thief. Its single-threaded performance is strong, with a Geekbench single-core score of 2759 and a Passmark single-thread score of 3841. This is crucial for a game like Thief, which relies heavily on single-threaded game logic. The CPU's high performance is reflected in the FPS data: at 1080p, where the GPU load is lower, the system still achieves very high frame rates (up to 190.3 FPS on Low), indicating that the CPU can easily keep up with the GPU's output.

The data shows that the FPS drops are primarily correlated with resolution increases, which is a classic sign of a GPU bottleneck. The Ryzen 5 7500F's strong performance, evidenced by its Cinebench R23 multicore score of 22799, provides sufficient headroom to ensure that the RTX 3070 Ti is the primary determinant of frame rate, especially at higher resolutions. This makes the CPU a non-issue for this game, allowing the GPU to perform to its full potential.