The Technomancer

# The Technomancer with Intel Core Ultra X7 368H + NVIDIA GeForce RTX 5060

The Intel Core Ultra X7 368H paired with the NVIDIA GeForce RTX 5060 delivers a playable but resolution-sensitive experience in The Technomancer, ranking 1863rd out of 2825 tested combos. The data shows a system that handles 1080p comfortably across all settings, becomes marginal at 1440p with Ultra settings, and struggles to maintain fluid frame rates at 4K. The combination of a 16-core Panther Lake mobile CPU and a Blackwell 2.0 GPU produces results that are consistently GPU-limited at higher resolutions, while the CPU's strong single-thread performance keeps 1080p frame rates high.

Resolution Scaling

Frame rates drop sharply as resolution increases, revealing a system where the GPU becomes the primary constraint at 1440p and 4K. At 1080p High settings, the combo averages 96 FPS. Moving to 1440p High reduces that to 63 FPS, a 34% decrease. At 4K High, the average falls to 34 FPS, which is 65% below the 1080p result. This scaling pattern indicates that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus are the limiting factors at higher resolutions, rather than the CPU.

The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the difference between Low (146 FPS) and Ultra (75 FPS) is 71 FPS. At 1440p, that spread narrows to 46 FPS (95 FPS Low vs 49 FPS Ultra). At 4K, the spread compresses further to 25 FPS (52 FPS Low vs 27 FPS Ultra). This compression at 4K suggests the GPU is saturated even at Low settings, leaving little headroom for quality improvements without substantial frame rate penalties.

The Medium settings data provides additional insight into scaling behavior. At 1080p Medium, the average is 112 FPS with a minimum of 95 FPS. At 1440p Medium, the average drops to 73 FPS with a minimum of 62 FPS. At 4K Medium, the average falls to 40 FPS with a minimum of 34 FPS. The minimum frame rates follow the same proportional decline as averages, indicating consistent performance without sudden stutters or frame time spikes.

Ultra settings at 4K produce an average of 27 FPS, which is below the threshold for smooth gameplay. Even at 1440p Ultra, the 49 FPS average is marginal for a fast-paced Action RPG. The data suggests that players targeting 60 FPS should stick to 1080p with High settings or lower, or 1440p with Medium settings, where the 73 FPS average provides adequate headroom.

CPU Role

The Intel Core Ultra X7 368H brings 16 cores and 16 threads to this combination, with a base clock of 2.00 GHz and a boost clock of 5.00 GHz. The processor's Cinebench R23 multi-core score of 28221 and single-core score of 3984 indicate strong performance that places it in the 87th percentile among all CPUs. This headroom means the CPU is rarely the bottleneck in The Technomancer, a game that released in 2016 and does not heavily utilize many threads.

The CPU's PassMark multi-thread score of 32956 and single-thread score of 4005 reinforce its capability. The data compression score of 312927 and floating point math score of 105681 show a processor that handles varied workloads efficiently. However, The Technomancer's age means it likely depends more on single-thread performance, where the 368H's 3984 Cinebench R23 single-core score provides ample strength.

At 1080p Low settings, the system achieves 146 FPS, which suggests the CPU can feed frames faster than the GPU can render them at lower resolutions. The fact that 1080p Ultra drops to 75 FPS while 1080p Low reaches 146 FPS indicates the GPU, not the CPU, is the limiting factor even at the lowest resolution tested. The CPU's 18 MB of shared L3 cache and LPDDR5X memory support with 153.6 GB/s bandwidth ensure that data delivery to the GPU is not a constraint.

Comparing to nearest rivals, the 368H scores essentially identically to the Intel Core 7 253PE (deltaPct -0.1) and Intel Core 5 223PE (deltaPct -0.2), while edging out the AMD Ryzen 9 7940H (deltaPct 0.2) and Intel Xeon 6507P (deltaPct 0.2). These negligible differences mean CPU choice among these options would not measurably alter The Technomancer's frame rates.

How This Combo Ranks

This combination ranks 1863rd out of 2825 tested combos for The Technomancer, placing it in the lower third of all configurations. The percentileVsAllCpus score of 87 for the CPU and percentileVsAllGpus score of 72 for the GPU indicate that both components are above-average performers individually, yet their combined ranking in this specific game is modest.

The ranking reflects The Technomancer's demanding nature at higher resolutions combined with the RTX 5060's 8 GB memory capacity. Many combos ahead of this pairing likely feature GPUs with larger memory buffers or higher bandwidth, which matter more in this Action RPG than raw compute throughput. The CPU's strong benchmark scores do not translate into a higher combo ranking because the game's frame rates are predominantly GPU-bound.

The combo's position becomes clearer when examining the GPU's nearest rivals. The RTX 5060's average benchmark score of 26331 is nearly identical to the AMD Radeon 860M (deltaPct -0.3) and NVIDIA GeForce MX550 (deltaPct -0.3), while the AMD Radeon RX 5700 XT 50th Anniversary scores 26553 (deltaPct -0.8) and the AMD Radeon RX 6750 XT scores 26011 (deltaPct 1.2). These rival GPUs would likely produce similar frame rates in The Technomancer, meaning the combo's ranking is more about the game's requirements than any deficiency in this specific pairing.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance across all settings. Low settings produce an average of 146 FPS, Medium averages 112 FPS with a range of 95 to 129 FPS, High averages 96 FPS, and Ultra averages 75 FPS. All 1080p configurations exceed the 60 FPS threshold, making this resolution the sweet spot for the combination.

At 2560x1440, performance remains usable but with more variation. Low settings average 95 FPS, Medium averages 73 FPS with a range of 62 to 84 FPS, High averages 63 FPS, and Ultra drops to 49 FPS. The Medium setting's minimum of 62 FPS indicates that even during demanding scenes, the system maintains playable frame rates at 1440p.

At 3840x2160, the system struggles to maintain smooth performance. Low settings average 52 FPS, Medium averages 40 FPS with a range of 34 to 46 FPS, High averages 34 FPS, and Ultra averages 27 FPS. Only the Low setting at 4K approaches playability, and even then, the 52 FPS average leaves little margin for demanding scenes.

The Medium settings data across all three resolutions provides the most complete picture of performance scaling. At 1080p Medium, the 112 FPS average with a 95 FPS minimum shows consistent performance. At 1440p Medium, the 73 FPS average with a 62 FPS minimum maintains a 60 FPS floor. At 4K Medium, the 40 FPS average with a 34 FPS minimum falls below smooth gameplay standards.

GPU Role

The NVIDIA GeForce RTX 5060 features 8 GB of GDDR7 memory on a 128-bit bus, delivering 448.0 GB/s of bandwidth. The GPU's base clock of 2280 MHz and boost clock of 2497 MHz drive 3840 shading units, 120 TMUs, and 48 ROPs. The 19.18 TFLOPS FP32 performance and 299.6 GTexel/s texture rate provide substantial compute capability, yet the 8 GB memory capacity becomes a limiting factor in The Technomancer at higher resolutions.

The GPU's PassMark G3D score of 20891 and 3DMark Steel Nomad DX12 score of 3628 place it in the 72nd percentile among all GPUs. The Geekbench OpenCL score of 112787 and Vulkan score of 113321 show balanced compute performance across APIs. The GPU's nearest rivals in benchmark scores include the AMD Radeon 860M (deltaPct -0.3) and NVIDIA GeForce MX550 (deltaPct -0.3), though these comparisons reflect synthetic benchmarks rather than in-game performance.

The RTX 5060's 8 GB memory capacity is the most likely explanation for the steep frame rate drops at 4K. The Technomancer, released in 2016, may require more than 8 GB of video memory at 4K Ultra settings, causing the GPU to spill over into system memory. The 128-bit bus width, while paired with fast GDDR7 memory, limits the memory bandwidth available to feed the GPU's 3840 shading units at high resolutions.

The GPU's transistor count of 21,900 million on a 181 mm² die with a 5 nm process from TSMC indicates a dense, power-efficient design. The 145 W TDP and 300 W suggested PSU requirement are modest for the performance delivered. The PCIe 5.0 x8 interface provides sufficient bandwidth for the GPU's memory architecture, though the 4K performance ceiling appears tied to the memory subsystem rather than interface limitations.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: The data shows 1920x1080 is the only resolution where all settings exceed 60 FPS, with Low at 146 FPS, Medium at 112 FPS, High at 96 FPS, and Ultra at 75 FPS. At 1440p, only Low (95 FPS), Medium (73 FPS), and High (63 FPS) stay above 60 FPS, while Ultra drops to 49 FPS.

Q: Can this system handle 4K gaming in The Technomancer?

A: At 4K, the combo averages 52 FPS on Low, 40 FPS on Medium, 34 FPS on High, and 27 FPS on Ultra. Only the Low setting approaches playability, and the 52 FPS average provides minimal headroom for demanding scenes.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core Ultra X7 368H scores nearly identically to the Intel Core 7 253PE (deltaPct -0.1) and Intel Core 5 223PE (deltaPct -0.2), while slightly outperforming the AMD Ryzen 9 7940H (deltaPct 0.2) and Intel Xeon 6507P (deltaPct 0.2) in average benchmark scores.

Q: Is the GPU or CPU the limiting factor in this game?

A: The frame rate scaling from 1080p to 4K indicates the GPU is the primary constraint. At 1080p Low, the system reaches 146 FPS, and the proportional drops at higher resolutions follow GPU-bound behavior. The CPU's 87th percentile ranking and strong single-thread scores provide sufficient headroom.

Q: What settings should be used for 60 FPS gameplay?

A: At 1080p, all settings including Ultra (75 FPS) achieve 60 FPS. At 1440p, High settings (63 FPS) maintain 60 FPS, but Ultra (49 FPS) does not. At 4K, no setting achieves 60 FPS, with Low being the closest at 52 FPS.

Q: How does the GPU's benchmark performance compare to its rivals?

A: The RTX 5060's average benchmark score of 26331 is within 1.2% of its nearest rivals, including the AMD Radeon 860M (26401), NVIDIA GeForce MX550 (26421), AMD Radeon RX 5700 XT 50th Anniversary (26553), and AMD Radeon RX 6750 XT (26011).