The Technomancer

The Technomancer

AVERAGE FPS
27
limited

This combination may struggle with this title, averaging 27 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 10 14 13 18
1440p QHD 20 25 28 34
1080p Full HD 29 35 40 57

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 18
3840x2160 High 14
3840x2160 Medium 13
3840x2160 Ultra 10
2560x1440 Low 34
2560x1440 Medium 28
2560x1440 High 25
2560x1440 Ultra 20
1920x1080 Low 57
1920x1080 Medium 40
1920x1080 High 35
1920x1080 Ultra 29

The Technomancer with Intel Core i7-14700K + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

The pairing of Intel’s Core i7-14700K with NVIDIA’s GeForce GTX 1050 Ti in The Technomancer produces a profoundly lopsided experience, one where the CPU’s immense headroom is completely capped by a GPU that ranks near the bottom of the current hardware landscape. The benchmark results show this combo sitting at rank 1646 out of 1656 tested configurations, placing it in the 0.6th percentile of all combos. That ranking is not an indictment of the processor, which sits in the 96th percentile of all CPUs tested, but rather a direct reflection of the graphics card’s 30th percentile standing among all GPUs. In essence, the system behaves as a modern flagship CPU shackled to a legacy entry-level graphics solution.

How This Combo Ranks

The combo’s rank of 1646 out of 1656 is a stark indicator of where this pairing falls in the broader ecosystem. With only ten configurations performing worse, this setup is effectively in the bottom 1% of tested combos for The Technomancer. The data suggests that the GTX 1050 Ti is the overwhelming bottleneck, as the Core i7-14700K’s benchmark scores place it in elite company. The CPU’s average benchmark score of 70074 puts it within a hair’s breadth of the Intel Core i7-14700KF, which scores 70104 (a 0% delta), and the AMD Ryzen 9 9950X, which scores 70420 (a -0.5% delta). Meanwhile, the GPU’s average score of 5316 is nearly identical to the NVIDIA GeForce 930A at 5317 (0% delta) and only 0.4% ahead of the NVIDIA GeForce 940M’s 5297.

What makes this ranking particularly telling is the discrepancy between the two components’ percentile standings. The CPU’s 96th percentile ranking versus the GPU’s 30th percentile creates a massive imbalance. In The Technomancer, a game from 2016, the CPU’s 20 cores and 28 threads are largely irrelevant when the GPU can only muster single-digit frame rates at higher settings. The combo’s rank is thus a reflection of the weakest link, and the data clearly shows that the GTX 1050 Ti is that link. Even the CPU’s nearest rivals, which include server-class Xeon parts like the Intel Xeon Platinum 8270 (71056 average score, -1.4% delta), cannot rescue the pairing from its lowly position.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the defining component in this pairing, and its specifications explain why the combo languishes at rank 1646. The card features 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. Its Pascal architecture, built on a 14 nm process with 3,300 million transistors, operates at a base clock of 1291 MHz and a boost clock of 1392 MHz. With 768 shading units, 48 TMUs, and 32 ROPs, the card delivers a pixel rate of 44.54 GPixel/s and a texture rate of 66.82 GTexel/s. Its FP32 performance sits at 2.138 TFLOPS, which is modest by any modern standard.

In The Technomancer, these specs translate to severe frame rate limitations. At 1080p with Low settings, the card achieves an average of 57.1 FPS, which is playable but far from smooth. However, the moment settings are increased, performance craters. At 1080p Medium, the average drops to 39.9 FPS, and at High it falls to 35.3 FPS. Ultra settings at 1080p yield just 28.8 FPS. The GPU’s 4 GB VRAM buffer is also a concern, as the game’s texture demands at higher presets can exceed this capacity, leading to potential stuttering. The card’s end-of-life production status and its position at the 30th percentile of all GPUs underscore its age, with nearest rivals including mobile parts like the GeForce 940M.

CPU Role

The Intel Core i7-14700K is a desktop-class powerhouse that is utterly wasted in this configuration. Its 20 cores and 28 threads, based on the Raptor Lake architecture and built on a 10 nm process, provide a level of processing power that the GTX 1050 Ti cannot utilize. The CPU’s base clock of 3.40 GHz and boost clock of 5.60 GHz are exceptional, and its 33 MB of shared L3 cache, along with 2 MB of L2 per core, ensures rapid data access. The processor’s benchmark results are staggering: a Cinebench R23 multi-core score of 44534 and a single-core score of 6287, alongside a Geekbench multi-core score of 18896 and a single-core score of 2932.

In the context of The Technomancer, the CPU’s role is purely to feed frames to the GPU, and it does so without breaking a sweat. The game’s CPU demands are minimal compared to what the i7-14700K can deliver, meaning the processor is likely idling while the GPU struggles. The CPU’s 96th percentile ranking and its average benchmark score of 70074 place it just 0.3% behind the AMD EPYC 9115 (69887) and 0.5% ahead of the same EPYC part when considering the delta values. The 14700K’s nearest rival, the 14700KF, scores 70104, a negligible 0% difference. None of this CPU power translates to higher frame rates, as the data shows the GPU is the limiting factor at every resolution and setting.

FAQ

Q: Why is the combo rank so low when the CPU is high-end?

A: The combo rank of 1646 out of 1656 reflects the GPU’s performance, not the CPU’s. The GTX 1050 Ti’s 30th percentile GPU ranking versus the i7-14700K’s 96th percentile CPU ranking means the graphics card is the bottleneck, dragging the entire system down to near-bottom performance.

Q: What is the best frame rate this combo can achieve?

A: The highest average FPS recorded is 57.1 at 1080p with Low settings. Any increase in resolution or graphical fidelity results in a significant drop, with the lowest being 9.7 FPS at 4K Ultra.

Q: How does the GTX 1050 Ti compare to its nearest rivals?

A: The GPU’s average benchmark score of 5316 is essentially tied with the NVIDIA GeForce 930A (5317, 0% delta) and 0.4% ahead of the GeForce 940M (5297). It is 0.7% faster than the AMD Radeon R7 240 (5280) but 0.8% slower than the AMD Radeon R7 M445 (5361).

Q: Is the CPU’s performance negatively impacted by the GPU?

A: No, the CPU’s benchmark scores are unaffected. The i7-14700K maintains its high ranking, but in The Technomancer, its power is underutilized because the GPU cannot process frames fast enough to engage the CPU fully.

Q: What does the data suggest about playing at 1440p?

A: At 1440p, the combo’s performance is marginal. The best result is 33.5 FPS at Low settings, while Medium and High yield 27.8 and 25.4 FPS respectively. Ultra drops to 20.3 FPS, indicating the GPU struggles at this resolution.

Q: How does the 4K performance compare to 1080p?

A: The drop is dramatic. At 1080p Low, the average is 57.1 FPS, but at 4K Low it falls to 17.9 FPS. This represents a 68.6% reduction, clearly showing the GPU’s limits at higher pixel counts.

Resolution Scaling

The measured FPS data reveals a clear pattern of the GTX 1050 Ti being the sole limiting factor, with the CPU’s vast capabilities never coming into play. At 1080p, the combo ranges from 57.1 FPS at Low to 28.8 FPS at Ultra, a spread of 28.3 FPS across the quality settings. Moving to 1440p, the same settings yield 33.5 FPS at Low and 20.3 FPS at Ultra, a narrower spread of 13.2 FPS. This compression of the FPS range at higher resolutions indicates that the GPU is increasingly overwhelmed, and the settings have less impact because the card is already maxed out.

At 4K, the situation becomes dire. The average FPS at Low is 17.9, dropping to 13.6 at High, 13.0 at Medium, and a mere 9.7 at Ultra. The difference between Low and Ultra at 4K is just 8.2 FPS, suggesting that the GPU is so far beyond its limits that even reducing the graphical load cannot meaningfully improve performance. The data shows that the scaling from 1080p to 4K is catastrophic: at Low settings, the FPS drops from 57.1 to 17.9, a reduction of 68.6%. At Ultra, the drop is from 28.8 to 9.7, a 66.3% decrease.

This resolution scaling analysis confirms that the system is GPU-bound at all tested settings. The i7-14700K, with its 20 cores and 5.60 GHz boost clock, is capable of far more, but the GTX 1050 Ti’s 4 GB VRAM and 112.1 GB/s bandwidth simply cannot feed frames fast enough. The fact that the CPU’s ranking remains at the 96th percentile while the combo sits at the bottom of the pile is proof that the processor is not the issue. For anyone considering this pairing, the data is unambiguous: the GTX 1050 Ti is the ceiling, and the CPU’s potential is entirely theoretical in The Technomancer.

Hardware Specifications

Intel Core i7-14700K

Cores / Threads 20 / 28
Base Clock 3400 MHz
Boost Clock 5600 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i7-14700K + NVIDIA GeForce GTX 1050 Ti in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 17.9
3840x2160 High 13.6
3840x2160 Medium 13.0
3840x2160 Ultra 9.7
2560x1440 Low 33.5
2560x1440 Medium 27.8
2560x1440 High 25.4
2560x1440 Ultra 20.3
1920x1080 Low 57.1
1920x1080 Medium 39.9
1920x1080 High 35.3
1920x1080 Ultra 28.8

The Technomancer with ii7-14700K + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with GTX 1050 Ti + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with ii7-14700K + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.