The Technomancer
This combination may struggle with this title, averaging 27 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 11 | 17 | 17 |
| 1440p QHD | 21 | 23 | 26 | 34 |
| 1080p Full HD | 26 | 38 | 44 | 57 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with Intel Core i7-14700KF + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The Technomancer presents an extreme stress test for this combination of Intel Core i7-14700KF and NVIDIA GeForce GTX 1050 Ti, with benchmark results placing the pairing at rank 1637 out of 1656 tested combos. The data indicates a system heavily constrained by the graphics card, where even the most favorable settings fail to deliver playable performance at mainstream resolutions. The following analysis breaks down the measured FPS data to clarify where the bottleneck lies and what users can expect from this configuration.
Resolution Scaling
The measured FPS data shows a stark collapse in performance as resolution increases, confirming the GTX 1050 Ti as the dominant limiting factor. At 1920x1080 with Low settings, the combo achieves an average of 56.9 FPS, which drops to 34.3 FPS at 2560x1440 and further to 16.5 FPS at 3840x2160. This represents a 39.7% performance loss from 1080p to 1440p and a 71% loss from 1080p to 4K. The scaling pattern is consistent with a GPU that runs out of pixel throughput and memory bandwidth very quickly.
The 4K results are uniformly poor across all settings, ranging from 10.9 FPS at High to 17.1 FPS at Medium. The narrow spread between Low and Medium at 4K (16.5 vs 17.1 FPS) suggests that at this resolution, the GPU is saturated regardless of graphical complexity — the pixel fill rate and memory bandwidth of 112.1 GB/s simply cannot sustain the workload. At 1440p, the gap between Low and High settings widens to 11.1 FPS (34.3 vs 23.2), indicating that while still GPU-bound, there is some headroom for settings adjustments. At 1080p, the scaling becomes more pronounced, with Low hitting 56.9 FPS versus 38.2 FPS at High, showing that the GPU has more relative capacity at this resolution but still cannot approach the CPU's potential.
The data clearly shows that resolution is the primary performance killer for this pairing. The i7-14700KF, with its 20 cores and 28 threads, is never the constraint here — the GTX 1050 Ti's 4 GB GDDR5 memory and 128-bit bus are overwhelmed by the pixel count at higher resolutions. Even at 1080p, the 56.9 FPS at Low is the only setting that approaches smooth gameplay, and this drops to 25.5 FPS at Ultra, a 55.2% reduction.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is the clear performance ceiling for this combo. With a boost clock of 1392 MHz and 768 shading units, the card delivers a measured FP32 throughput of 2.138 TFLOPS, but the 4 GB GDDR5 memory on a 128-bit bus proves inadequate for The Technomancer's demands. The benchmark results show that even at Low settings, the GPU cannot maintain 60 FPS at 1080p, maxing out at 56.9 FPS average.
The VRAM capacity is a critical factor. At 4K Ultra, the combo manages only 13.1 FPS, and at 1440p Ultra, 21.2 FPS — figures that indicate the card is both bandwidth-limited and capacity-limited. The 112.1 GB/s memory bandwidth is insufficient for the texture and geometry data required at higher resolutions, and the 4 GB frame buffer likely forces constant swapping at Ultra settings. The card's percentile ranking of 30 among all GPUs underscores its position as an entry-level part, with nearest rivals being the GeForce 930A, 940M, and Radeon R7 240 — all similarly low-end products.
The card's 14 nm Pascal architecture, while efficient at 75 W TDP, cannot compensate for its fundamental hardware limits. The measured FPS at 1080p Medium (44 FPS) versus 1080p High (38.2 FPS) shows a 13.2% performance penalty for the higher preset, but neither approaches the 60 FPS target. The GPU's PassMark G3D score of 6340, compared to its compute score of 2652, indicates that traditional rasterization is its relative strength, yet The Technomancer's demands still exceed what this card can deliver for smooth play.
CPU Role
The Intel Core i7-14700KF is vastly overqualified for this GPU pairing, and the data confirms it is never the bottleneck. With a boost clock of 5.60 GHz and 20 cores/28 threads, the CPU's Cinebench R23 multi-core score of 44557 and single-core score of 6290 place it in the 96th percentile of all CPUs. The nearest rivals — i7-14700K, EPYC 9115, and Ryzen 9 9950X — all score within 1.3% of each other, showing this is a top-tier processor.
In The Technomancer, the CPU's role is muted because the GTX 1050 Ti cannot feed it enough frames to matter. At 1080p Low, the 56.9 FPS average likely still leaves CPU headroom, as the game's CPU demands are modest compared to what this processor can handle. The 33 MB of shared L3 cache and DDR4/DDR5 memory support would normally provide ample bandwidth for game logic, but the GPU's 112.1 GB/s memory bandwidth is the limiting path.
The CPU's benchmark scores, such as PassMark multi-thread at 52425 and single-thread at 4480, indicate it could drive frame rates far beyond what this GPU produces if paired with a more capable graphics card. However, in this combo, the CPU's 125 W TDP and robust thermals are wasted potential. The data shows no scenario where increasing CPU load would improve FPS — the GPU is the sole limiter across all resolutions and settings.
Settings Recommendations
Based on the measured FPS rows, the only viable setting for this combo is 1080p Low, which produces an average of 56.9 FPS — the sole result above 50 FPS. This is the recommended configuration for any attempt at playable performance. At 1080p Medium, the average drops to 44 FPS, a 22.7% reduction that pushes the experience into stutter territory. 1080p High yields 38.2 FPS, and 1080p Ultra falls to 25.5 FPS, both far too low for consistent gameplay.
At 1440p, all settings fail to reach 35 FPS, with Low at 34.3 FPS being the best case. This resolution should be avoided entirely. 4K is simply not viable, with all settings below 17.1 FPS. The data indicates that Low settings at 1080p is the only configuration that approaches acceptable frame pacing.
The recommendation is to lock 1080p Low and accept the visual compromises. Medium settings at 1080p may be tolerable for less action-heavy scenes, but the 44 FPS average leaves little margin for drops during combat. Users should prioritize frame rate over fidelity with this GPU, as even the lowest settings cannot guarantee a smooth experience in all scenarios.
FAQ
Q: What is the best FPS this combo can achieve in The Technomancer?
A: The highest measured average FPS is 56.9 at 1920x1080 with Low settings. No other resolution or setting combination exceeds this value.
Q: Is this combo playable at 4K?
A: No. At 3840x2160, all settings produce average FPS between 10.9 (High) and 17.1 (Medium), which is far below playable thresholds.
Q: How does the GPU's memory bandwidth affect performance?
A: The GTX 1050 Ti has a memory bandwidth of 112.1 GB/s via a 128-bit bus and 4 GB GDDR5. This is insufficient for higher resolutions, as shown by the 71% FPS drop from 1080p Low to 4K Low.
Q: Is the CPU holding back performance in this game?
A: No. The i7-14700KF ranks in the 96th percentile of CPUs with a Cinebench R23 multi-core score of 44557, and the FPS scaling patterns indicate the GPU is the sole bottleneck.
Q: What settings should I use for the best experience?
A: 1920x1080 with Low settings is the only configuration that averages above 50 FPS (56.9). Medium at 1080p drops to 44 FPS, and Ultra at 1080p falls to 25.5 FPS.
Q: How does this combo rank among all tested configurations?
A: It ranks 1637 out of 1656 total combos, placing it in the bottom 1.1% of all tested pairings for this game.
Measured FPS Breakdown
At 1920x1080, the measured average FPS values are: Low 56.9, Medium 44, High 38.2, Ultra 25.5. The gap between Low and Ultra is 31.4 FPS, a 55.2% reduction. Medium to High shows a 13.2% drop, while High to Ultra drops 33.2%.
At 2560x1440, the results are: Low 34.3, Medium 26.3, High 23.2, Ultra 21.2. The spread from Low to Ultra is 13.1 FPS, a 38.2% reduction. The difference between High and Ultra narrows to 8.6%, indicating diminishing returns from higher settings.
At 3840x2160, the values are: Low 16.5, Medium 17.1, High 10.9, Ultra 13.1. Notably, Medium outperforms Low by 0.6 FPS, and Ultra outperforms High by 2.2 FPS, suggesting measurement variance or driver-level optimizations at these extreme loads. All 4K results are effectively unplayable.
The best single measurement is 1080p Low at 56.9 FPS, and the worst is 4K High at 10.9 FPS. Across all 12 measurements, the average FPS is approximately 27.3, with 1080p averaging 41.2, 1440p averaging 26.3, and 4K averaging 14.4.
How This Combo Ranks
This combo ranks 1637 out of 1656 tested combinations in The Technomancer, placing it in the bottom 1.1% of all configurations. The rank reflects the severe GPU limitation — the GTX 1050 Ti's percentile of 30 among all GPUs, combined with its average benchmark score of 5316, positions it near the GeForce 930A and 940M in overall capability.
The CPU side provides no upward pressure on the ranking. The i7-14700KF's percentile of 96 and average benchmark score of 70104 are elite-tier, with nearest rivals like the i7-14700K and Ryzen 9 9950X scoring within 0.4% of each other. However, the GPU's performance ceiling dominates the in-game results.
The 19-position gap from the bottom (1637 of 1656) indicates there are even less capable combinations tested, but this pairing's 4K results below 17 FPS and 1440p results below 35 FPS firmly establish it as unsuitable for The Technomancer at any reasonable quality level. The data suggests that any upgrade path should prioritize the GPU, as the CPU has ample headroom to drive far higher frame rates with a more capable graphics card.
Hardware Specifications
Intel Core i7-14700KF
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700KF + NVIDIA GeForce GTX 1050 Ti in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Medium | 17.1 |
| 3840x2160 | Low | 16.5 |
| 3840x2160 | Ultra | 13.1 |
| 3840x2160 | High | 10.9 |
| 2560x1440 | Low | 34.3 |
| 2560x1440 | Medium | 26.3 |
| 2560x1440 | High | 23.2 |
| 2560x1440 | Ultra | 21.2 |
| 1920x1080 | Low | 56.9 |
| 1920x1080 | Medium | 44.0 |
| 1920x1080 | High | 38.2 |
| 1920x1080 | Ultra | 25.5 |
The Technomancer with ii7-14700KF + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with GTX 1050 Ti + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with ii7-14700KF + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.