The Technomancer

The Technomancer runs on a 2016-era Action RPG engine that responds predictably to resolution changes, and the measured data for the AMD Ryzen 7 3700X with the NVIDIA GeForce RTX 5050 shows a clear GPU-bound trajectory. At 1080p, the combo delivers playable to high-refresh rates, but the frame rate curve indicates that the graphics card becomes the primary constraint as pixel count rises, with the CPU providing ample headroom at lower resolutions. The benchmark results reveal a system that is well-balanced for 1080p gaming but struggles to maintain smooth performance at 4K Ultra settings.

Resolution Scaling

The measured FPS data shows a steep decline as resolution increases, which is characteristic of a GPU-limited scenario. At 1080p with Low settings, the combo achieves 150 FPS, but this drops to 98 FPS at 1440p and further to 54 FPS at 4K. This represents a 64% performance loss from 1080p to 4K at Low settings, indicating that the RTX 5050's rendering throughput is the limiting factor. The pattern holds across all settings: at High, the system delivers 98 FPS at 1080p, 64 FPS at 1440p, and 35 FPS at 4K, showing a consistent 35-36% reduction per resolution step.

Interestingly, the scaling from 1080p to 1440p is more aggressive than from 1440p to 4K in percentage terms. At Medium settings, the drop from 1080p (115 FPS) to 1440p (75 FPS) is 34.8%, while the drop from 1440p to 4K (41 FPS) is 45.3%. This suggests that the GPU's memory bandwidth and shading resources are being taxed heavily at 4K, with the 128-bit memory bus and 320.0 GB/s bandwidth becoming a bottleneck. The 8 GB GDDR6 frame buffer is sufficient for 1080p and 1440p, but at 4K the combination of higher pixel count and texture demands pushes the memory subsystem to its limits.

The frame time variance also increases with resolution. At 1080p Medium, the measured range is 98 to 132 FPS (a 34 FPS spread), while at 1440p Medium it expands to 64 to 87 FPS (a 23 FPS spread), and at 4K Medium it tightens to 35 to 48 FPS (a 13 FPS spread). The absolute variance shrinks at higher resolutions because the GPU is saturated, but the relative impact of frame pacing issues becomes more noticeable. For players targeting 60 FPS, the data shows that 1440p High (64 FPS) is the highest quality setting that maintains this threshold, while 4K requires dropping to Low (54 FPS) to stay above 50 FPS.

How This Combo Ranks

The combo ranks 1721 out of 2825 tested combinations for The Technomancer, placing it in the lower-middle tier of the database. This percentile position reflects the RTX 5050's modest standing in the GPU hierarchy—it sits at the 66th percentile against all GPUs—combined with the Ryzen 7 3700X's 84th percentile CPU ranking. The game's engine appears to favor raw GPU throughput over multi-core CPU performance, which explains why this combo does not rank higher despite the CPU's strong absolute benchmark scores.

Looking at the GPU's nearest rivals, the RTX 5050's average benchmark score of 21035 is only 1.6% higher than the AMD Radeon RX 5600 XT (20713), and it trails the AMD Radeon RX Vega M GL (21153) by 0.6%. This places the RTX 5050 in a competitive but not dominant position. The CPU side tells a different story: the Ryzen 7 3700X's average score of 34260 is within 0.2% of the Intel Core i5-13450HX (34333) and 0.5% ahead of the Intel Core Ultra 7 165H (34083), showing that the CPU is well-matched against modern mid-range competitors.

The rank of 1721 suggests that many combinations with older or less powerful GPUs outperform this setup in The Technomancer. This is likely due to the game's release date (2016-06-27) and its reliance on DirectX 11-era rendering techniques, which may not fully utilize the RTX 5050's Blackwell architecture features. The PassMark DirectX 11 score of 150 is notably higher than the DirectX 12 score of 66, indicating that the GPU's legacy API performance is stronger, which should theoretically benefit this game. However, the combination's overall ranking suggests that the game's engine has other bottlenecks that prevent the hardware from reaching its full potential.

GPU Role

The RTX 5050 is built on the Blackwell 2.0 architecture with the GB207 chip, fabricated on TSMC's 5 nm process. It features 2560 shading units, 80 TMUs, and 32 ROPs, with a base clock of 2317 MHz and a boost clock of 2572 MHz. The 8 GB GDDR6 memory operates at 2500 MHz (20 Gbps effective) across a 128-bit bus, yielding 320.0 GB/s of bandwidth. These specifications place the card in the entry-level segment of the 50-series, and the benchmark data reflects this positioning.

In The Technomancer, the GPU's 13.17 TFLOPS of FP32 performance is the key driver of frame rates. The game's resolution scaling data shows that the card delivers 150 FPS at 1080p Low but drops to 77 FPS at 1080p Ultra, a 48.7% reduction. This performance envelope indicates that the game's Ultra settings include effects that heavily tax the GPU's pixel and texture processing capabilities. The 82.30 GPixel/s pixel rate and 205.8 GTexel/s texture rate are adequate for 1080p but become strained at 4K, where the 4K Ultra result of 28 FPS falls below playable thresholds.

The memory configuration is a notable limitation. The 8 GB capacity is sufficient for this game at all settings, as The Technomancer's 2016-era textures do not require more. However, the 128-bit bus width restricts memory bandwidth to 320.0 GB/s, which is modest by modern standards. The frame rate drops at 4K suggest that the memory subsystem cannot feed the shading units fast enough at higher pixel counts, creating a bandwidth bottleneck. The GPU's PassMark G3D score of 17326 and 3DMark Steel Nomad score of 2502 confirm its mid-range positioning, with the Steel Nomad result indicating strong DirectX 12 performance that the game does not fully exploit.

FAQ

Q: What is the highest resolution and settings combo that maintains 60 FPS in The Technomancer?

A: The data shows that 2560x1440 with High settings achieves 64 FPS average, which is the highest quality configuration that stays above 60 FPS. At 1920x1080, all settings except Ultra (77 FPS) exceed 60 FPS, with Medium reaching 115 FPS.

Q: How does the RTX 5050 compare to its closest rivals in raw GPU performance?

A: The RTX 5050's average benchmark score of 21035 is 1.6% higher than the AMD Radeon RX 5600 XT (20713) and 0.6% lower than the AMD Radeon RX Vega M GL (21153). It also trails the NVIDIA RTX A4000 Mobile (21379) by 1.6%.

Q: Is the Ryzen 7 3700X CPU a bottleneck at 1080p in this game?

A: The benchmark results indicate no CPU bottleneck at 1080p. The combo achieves 150 FPS at Low settings, and the CPU's PassMark multithread score of 22458 and Cinebench R15 multicore score of 2092 provide ample headroom. The frame rates are clearly GPU-limited at this resolution.

Q: What is the performance difference between Low and Ultra settings at 4K?

A: At 3840x2160, Low settings produce 54 FPS average, while Ultra settings drop to 28 FPS. This represents a 48.1% performance reduction, showing that Ultra settings nearly halve the frame rate at 4K resolution.

Q: How does the combo rank against all tested configurations in The Technomancer?

A: The combo ranks 1721 out of 2825 tested combinations, placing it in the 39th percentile. This ranking reflects the GPU's mid-range position (66th percentile overall) and indicates that many other combos deliver better performance in this specific game.

Q: Does the GPU's memory bandwidth support 4K gaming in this title?

A: The 320.0 GB/s bandwidth is sufficient for 4K Low (54 FPS) and Medium (41 FPS), but High (35 FPS) and Ultra (28 FPS) fall below 40 FPS. The 128-bit bus appears to limit performance at higher quality settings due to memory throughput constraints.

Measured FPS Breakdown

The measured data provides a complete picture of performance across resolutions and settings. At 1920x1080, the combo delivers 150 FPS on Low, 115 FPS on Medium (with a range of 98-132 FPS), 98 FPS on High, and 77 FPS on Ultra. This shows a smooth degradation curve where each quality tier costs roughly 15-20% performance. The 1080p results are all playable, with even the most demanding Ultra setting maintaining a 77 FPS average.

Moving to 2560x1440, the frame rates drop significantly but remain respectable. Low settings produce 98 FPS, Medium averages 75 FPS (ranging from 64 to 87 FPS), High delivers 64 FPS, and Ultra drops to 50 FPS. The 1440p Medium result is notable as it matches the 1080p High result (both 98 FPS), showing that the resolution increase costs roughly one quality tier. For players with 1440p monitors, High settings at 64 FPS is the recommended balance, while Ultra at 50 FPS remains playable for those who prioritize visual fidelity.

At 3840x2160, the performance becomes marginal. Low settings produce 54 FPS, Medium averages 41 FPS (ranging from 35 to 48 FPS), High drops to 35 FPS, and Ultra falls to 28 FPS. The 4K results show that the GPU is severely constrained, with even Low settings barely maintaining 50 FPS. The jump from 1440p to 4K costs roughly 45% performance across all settings, confirming that the RTX 5050 is not designed for 4K gaming in this title. The 4K Medium frame range of 35-48 FPS indicates inconsistent frame pacing, which could lead to noticeable stuttering during gameplay.

CPU Role

The AMD Ryzen 7 3700X is an 8-core, 16-thread processor based on the Zen 2 (Matisse) architecture, manufactured on TSMC's 7 nm process. It features a base clock of 3.60 GHz and a boost clock of 4.40 GHz, with 32 MB of L3 cache and dual-channel DDR4 memory support. The CPU's benchmark scores are robust: Cinebench R15 multicore reaches 2092, Geekbench multicore hits 8899, and PassMark multithread scores 22458. These results place the CPU at the 84th percentile against all CPUs, indicating strong multi-threaded performance.

In The Technomancer, the CPU's role is secondary to the GPU, as evidenced by the resolution scaling data. At 1080p Low, the combo reaches 150 FPS, which is likely near the game's engine limit. The CPU's single-thread performance, measured at 204 in Cinebench R15 and 2656 in PassMark single-thread, is sufficient to feed the GPU at all tested settings. The PassMark physics score of 1181 and integer math score of 66399 suggest that the CPU can handle the game's simulation and logic demands without becoming a bottleneck.

The CPU's memory bandwidth of 51.2 GB/s from dual-channel DDR4 is adequate for this game, as the 2016-era engine does not require high-bandwidth memory access. The PCIe Gen 4 support (24 lanes) provides sufficient bandwidth for the RTX 5050's PCIe 5.0 x8 interface, though the GPU's bandwidth requirements are modest. The Ryzen 7 3700X's 65W TDP and 3,800 million transistors on a 74 mm² die highlight its efficiency, and the benchmark data confirms that the CPU has ample headroom in this game—the frame rates are entirely GPU-limited at every resolution and settings combination tested.