The Technomancer

The Technomancer

AVERAGE FPS
37
playable

This combination offers playable performance with an average of 37 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 16 19 22 27
1440p QHD 26 32 36 48
1080p Full HD 37 50 57 76

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 27
3840x2160 Medium 22
3840x2160 High 19
3840x2160 Ultra 16
2560x1440 Low 48
2560x1440 Medium 36
2560x1440 High 32
2560x1440 Ultra 26
1920x1080 Low 76
1920x1080 Medium 57
1920x1080 High 50
1920x1080 Ultra 37

The Technomancer with AMD Ryzen 5 8400F + AMD Radeon RX 580, In-Depth Analysis

The AMD Ryzen 5 8400F paired with the AMD Radeon RX 580 delivers a playable experience in The Technomancer, but only if you are willing to compromise on visual fidelity at standard resolutions. The data indicates this combo is heavily GPU-limited, with the RX 580 acting as the primary bottleneck across the board. At 1920x1080, the combination of the Ryzen 5 8400F’s strong single-thread performance and the RX 580’s aging architecture produces a broad range of outcomes, from a smooth 75.7 FPS on Low to a stutter-prone 36.7 FPS on Ultra. The measured results show that this pairing ranks in the lower 6.2% of all tested combinations for this game, placing it in the 1553rd position out of 1656, which underscores its status as an entry-level or legacy configuration.

Settings Recommendations

The optimal preset for this hardware combination is Medium at 1920x1080, which achieves an average of 57.4 FPS. This represents the best balance between frame rate and visual quality, offering a 14.6% improvement over High settings (50.1 FPS) while still maintaining a frame rate that is above the 50 FPS threshold for smooth gameplay. While Low settings push performance to 75.7 FPS, the visual degradation is substantial, and the medium preset provides a more acceptable balance for an Action RPG where environmental detail matters. At 2560x1440, the Medium preset drops to 35.7 FPS, which falls below the playable threshold, so users at this resolution should select Low settings (47.9 FPS) to maintain responsiveness. The Ultra preset is not recommended at any resolution, as it yields only 36.7 FPS at 1080p and 15.5 FPS at 4K, making it effectively unplayable. The data clearly shows that the RX 580’s 8 GB of GDDR5 memory and 256.0 GB/s bandwidth are insufficient to handle the game’s high-end effects without severe frame rate penalties.

GPU Role

The AMD Radeon RX 580 is the definitive limiting factor in this configuration. With a base clock of 1257 MHz and boost clock of 1340 MHz, the Polaris 20 chip (GCN 4.0 architecture) delivers a raw FP32 performance of 6.175 TFLOPS. The 8 GB of GDDR5 memory on a 256-bit bus provides 256.0 GB/s of bandwidth, which is adequate for 1080p but becomes strained at higher resolutions. The measured frame rates show a consistent pattern: moving from Low to Ultra settings at 1080p incurs a 51.5% performance penalty (75.7 to 36.7 FPS), which indicates that the GPU’s shading units (2304) and texture units (144) are overwhelmed by the game’s higher-detail shaders. The RX 580’s 32 ROPs also limit fill-rate-heavy scenes, contributing to the sharp drop at 4K where the card manages only 15.5 FPS on Ultra. Benchmark data places this GPU in the 53rd percentile of all GPUs, with an average score of 13559, putting it on par with the NVIDIA GeForce GTX 570 (13564, 0% delta) and slightly behind the NVIDIA P106-090 (13716, -1.1% delta). This confirms that the RX 580 is a mid-range part from a previous generation, and its performance in The Technomancer reflects that heritage.

How This Combo Ranks

This specific combination of AMD Ryzen 5 8400F and AMD Radeon RX 580 ranks 1553rd out of 1656 tested combos in The Technomancer. This places it in the bottom 6.2% of all configurations, indicating that it is far from optimal for this title. The ranking is driven almost entirely by the GPU, as the CPU’s performance is more than sufficient for the game’s demands. The Ryzen 5 8400F scores 25064 on average in synthetic benchmarks, placing it in the 82nd percentile of all CPUs. Its nearest rivals include the AMD Ryzen 7 2700X (25057, 0% delta) and the AMD Ryzen 5 7500F (24993, 0.3% delta), showing that the 8400F is a strong processor. However, the RX 580’s 53rd percentile standing (average score 13559) drags the overall combo down. The data suggests that this pairing is best suited for older or less demanding titles, and for The Technomancer specifically, users would need to significantly lower settings or resolution to achieve acceptable performance. The rank reflects a fundamental mismatch: a modern, capable CPU paired with a legacy GPU that cannot keep pace with the game’s graphical requirements.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates are as follows: Low 75.7 FPS, Medium 57.4 FPS, High 50.1 FPS, and Ultra 36.7 FPS. This represents a clear gradient where each step up in settings costs roughly 15-20% performance. The jump from Medium to High is 12.7% (57.4 to 50.1), while High to Ultra is 26.8% (50.1 to 36.7), suggesting that the Ultra preset introduces disproportionately expensive effects. At 2560x1440, the frame rates drop significantly: Low 47.9 FPS, Medium 35.7 FPS, High 31.6 FPS, and Ultra 25.7 FPS. The 1440p results show that only the Low preset maintains a playable frame rate above 45 FPS, while Medium and High fall into the 30-36 FPS range, which is marginal for an action RPG. At 3840x2160, the RX 580 is completely outclassed: Low 26.5 FPS, Medium 22.3 FPS, High 18.6 FPS, and Ultra 15.5 FPS. None of these are playable, confirming that 4K is not a viable option for this hardware. The data shows a consistent pattern where the GPU’s memory bandwidth and fill rate become the limiting factors as resolution increases.

Resolution Scaling

The performance degradation from 1080p to 4K is severe and reveals the GPU-bound nature of this configuration. At Medium settings, the frame rate drops from 57.4 FPS at 1080p to 35.7 FPS at 1440p (a 37.8% reduction) and then to 22.3 FPS at 4K (a 61.1% reduction from 1080p). This scaling is steeper than what would be expected from pixel count alone, indicating that the RX 580’s 256.0 GB/s memory bandwidth is insufficient for the higher-resolution frame buffers. At Low settings, the drop is from 75.7 FPS at 1080p to 47.9 FPS at 1440p (36.7% reduction) and 26.5 FPS at 4K (65.0% reduction). The fact that even Low settings see a 65% hit at 4K suggests that the GPU’s raw compute (6.175 TFLOPS) is the bottleneck, not just memory. The CPU’s role in this scaling is minimal; the Ryzen 5 8400F’s boost clock of 4.70 GHz and 16 MB of L3 cache are more than capable of feeding the GPU at all resolutions, as evidenced by the fact that the frame rate drops are consistent across settings, which is a classic sign of GPU saturation. Users seeking higher frame rates at 1440p or 4K would need to replace the GPU, as the CPU has ample headroom.

FAQ

Q: What is the best resolution for this CPU/GPU combo in The Technomancer?

A: The only resolution that provides consistently playable frame rates is 1920x1080. At this resolution, the Low preset achieves 75.7 FPS, and the Medium preset achieves 57.4 FPS, both of which are above the 50 FPS threshold for smooth gameplay. At 2560x1440, only the Low preset (47.9 FPS) is playable, while 4K is not viable at any setting.

Q: How does the RX 580 compare to its closest rivals in benchmark scores?

A: The RX 580 has an average benchmark score of 13559, placing it in the 53rd percentile. Its nearest rival is the NVIDIA GeForce GTX 570 with a score of 13564 (0% delta), followed by the GeForce GTX 950 at 13549 (0.1% delta). The AMD Radeon Pro 455 scores 13416 (1.1% delta), and the NVIDIA P106-090 scores 13716 (-1.1% delta). These comparisons show the RX 580 is statistically equivalent to several older mid-range GPUs.

Q: Is the Ryzen 5 8400F a bottleneck in this configuration?

A: No. The Ryzen 5 8400F is a 6-core, 12-thread processor with a boost clock of 4.70 GHz and an 82nd percentile ranking among all CPUs. Its average benchmark score of 25064 is nearly identical to the AMD Ryzen 7 2700X (25057, 0% delta). The GPU is the clear bottleneck, as evidenced by the significant frame rate drops at higher resolutions and settings, which would not occur if the CPU were limiting.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset delivers 75.7 FPS, while the Ultra preset delivers 36.7 FPS. This represents a 51.5% reduction in performance when moving from the lowest to the highest quality settings. The Medium preset (57.4 FPS) offers a middle ground, while the High preset (50.1 FPS) sits between Medium and Ultra.

Q: Can this combo handle 4K gaming in The Technomancer?

A: No. At 3840x2160, the highest frame rate achieved is 26.5 FPS on Low settings, which is below playable levels. The Medium, High, and Ultra presets produce 22.3, 18.6, and 15.5 FPS respectively, all of which are too low for an action RPG. The RX 580’s 8 GB of VRAM and 256.0 GB/s bandwidth are insufficient for 4K rendering.

Q: How does this combo rank among all tested configurations for this game?

A: This combo ranks 1553rd out of 1656 tested combinations, placing it in the bottom 6.2% of all systems. This low ranking is directly attributable to the RX 580’s 53rd percentile performance, as the Ryzen 5 8400F’s 82nd percentile CPU performance is well above average. The pairing represents a significant mismatch between CPU and GPU capabilities.

CPU Role

The AMD Ryzen 5 8400F plays a supporting role in this configuration, and its capabilities exceed the demands of The Technomancer. This 6-core, 12-thread processor is based on the Zen 4 (Phoenix) architecture on a 4 nm process, with a base clock of 4.20 GHz and a boost clock of 4.70 GHz. Its 16 MB of shared L3 cache and 83.2 GB/s memory bandwidth provide ample data throughput for game logic and AI calculations. In synthetic benchmarks, the 8400F achieves a single-thread score of 2943 in Cinebench R23 and a multicore score of 20851, which places it in the 82nd percentile of all CPUs. Its nearest rival, the AMD Ryzen 7 2700X, scores 25057 (0% delta), indicating that the 8400F offers comparable overall performance to a previous-generation 8-core part. In the context of The Technomancer, the CPU’s 12 threads are more than sufficient, as the game’s frame rate is consistently limited by the GPU. The measured FPS data shows that at 1080p Low, the system hits 75.7 FPS, which is likely near the CPU’s practical limit for this title, but at higher settings and resolutions, the frame rate drops are entirely attributable to the GPU. The 8400F’s 65 W TDP and Gen 4 PCIe interface (20 lanes) ensure that it does not introduce any thermal or bandwidth bottlenecks. Users upgrading from an older CPU would see minimal gains in this game, as the RX 580 will remain the primary constraint until it is replaced.

Hardware Specifications

AMD Ryzen 5 8400F

Cores / Threads 6 / 12
Base Clock 4200 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 580

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1340 MHz MHz
TDP 185 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 8400F + AMD Radeon RX 580 in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 26.5
3840x2160 Medium 22.3
3840x2160 High 18.6
3840x2160 Ultra 15.5
2560x1440 Low 47.9
2560x1440 Medium 35.7
2560x1440 High 31.6
2560x1440 Ultra 25.7
1920x1080 Low 75.7
1920x1080 Medium 57.4
1920x1080 High 50.1
1920x1080 Ultra 36.7

The Technomancer with Ryzen 5 8400F + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with RX 580 + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with Ryzen 5 8400F + RX 580

Explore FPS benchmarks for other games using this same hardware combination.