The Technomancer

The Technomancer, a 2016 Action RPG, can be demanding, but the pairing of the AMD Ryzen 5 7400F and AMD Radeon RX 6600 presents a clear picture of where its performance boundaries lie. The data shows a combo that is capable of delivering smooth frame rates at 1080p, but one that requires careful settings management to maintain playability at higher resolutions. This analysis breaks down the measured performance to guide you on what to expect from this specific hardware configuration.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture. With a base clock of 3.70 GHz and a boost clock of 4.70 GHz, it provides a strong foundation for gaming. The CPU's 32 MB of shared L3 cache and support for DDR5 memory contribute to its overall responsiveness. In synthetic benchmarks, it scores 21,765 in Cinebench R23 multi-core and 3,072 in single-core, placing it in the 83rd percentile of all CPUs tested.

The CPU’s role in The Technomancer is more about ensuring a stable frame time floor than being the primary bottleneck. At 1080p, where the GPU is less taxed, the Ryzen 5 7400F's strong single-core performance is sufficient to feed the Radeon RX 6600. For instance, the combo achieves 130 FPS at 1080p Low settings, indicating that the CPU is not significantly limiting the frame rate in less demanding scenarios. The 12 threads also provide enough headroom for background tasks and the game's logic, preventing stutters that could occur on lower-core-count processors.

However, as resolution increases, the performance curve shows that the GPU becomes the limiting factor. The CPU's benchmark scores remain constant regardless of resolution, but the measured FPS drops significantly. At 4K Ultra, the average FPS falls to 24, a frame rate that suggests the CPU is waiting on the GPU to render each frame. The data indicates that the Ryzen 5 7400F is more than adequate for this title; it is not the source of performance limitations in the tested configurations. Its performance is closely matched by rivals like the Intel Core i5-14600T, which has an average score within 0.1% of the 7400F.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 6600 is based on the RDNA 2.0 architecture and features 8 GB of GDDR6 memory on a 128-bit bus, providing 224.0 GB/s of bandwidth. With a game clock of 2044 MHz and a boost clock of 2491 MHz, it offers a solid level of compute performance, delivering 8.928 TFLOPS of FP32 throughput. The GPU sits in the 63rd percentile of all GPUs, with its average benchmark score closely rivaling the NVIDIA RTX 4050 Mobile, which is a mere 0.1% behind.

The GPU's role is the primary determinant of frame rates in The Technomancer, especially at higher resolutions. The 8 GB VRAM is sufficient for the game, as the tested settings do not show signs of texture thrashing. The measured FPS scales predictably with resolution and settings, which is a clear indicator of a GPU-bound scenario. At 1080p High, the combo hits 85 FPS, a comfortable number for most players. The transition to 1440p High shows a significant drop to 56 FPS, a 34% reduction, highlighting the GPU's workload.

The most demanding scenario, 4K Ultra, yields an average of just 24 FPS, which is not playable for a smooth experience. The GPU's performance is the key differentiator here. It is important to note that the RX 6600 is not a high-end card; its 1792 shading units are a mid-range count. The data suggests that while the GPU can handle the game, it requires a compromise on settings or resolution to achieve a consistent 60 FPS target. The 8 GB frame buffer is not a hindrance in this title, but the raw compute power of the GPU is the ceiling for performance.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: Can this combo run The Technomancer at 4K?

A: Yes, but only at lower settings. The measured data shows an average of 47 FPS at 4K Low, which is playable. However, at 4K High, the average drops to 31 FPS, and at 4K Ultra, it falls to 24 FPS, which are not ideal for a smooth experience.

Q: What is the best resolution for a 60 FPS experience?

A: 1080p is the clear target. At 1080p Medium, the combo achieves an average of 100 FPS, and at 1080p High, it reaches 85 FPS. Even 1080p Ultra provides an average of 67 FPS, which is above the 60 FPS threshold.

Q: How does the CPU performance compare to its nearest rivals?

A: The Ryzen 5 7400F's average benchmark score is 32,750. This is nearly identical to the Intel Core i5-14600T, which scores 32,707 (0.1% slower), and the AMD Ryzen 7 PRO 6850H, which scores 32,812 (0.2% faster). It is a very competitive mid-range processor.

Q: Is the RX 6600's 8 GB of VRAM a problem for this game?

A: The data does not suggest a VRAM capacity issue. The performance scaling from Medium to High settings is consistent, and there are no anomalous drops that would indicate memory swapping. The bottleneck appears to be the GPU's compute power, not its memory capacity.

Q: What are the minimum and maximum FPS at 1440p Medium?

A: At 2560x1440 with Medium settings, the measured average FPS is 65, with a minimum of 56 and a maximum of 75. This shows that while the average is playable, there can be dips below 60 FPS.

Q: How does this combo rank against all other tested combos?

A: In The Technomancer, this specific combination of CPU and GPU ranks 2193 out of 2825 tested combos. This places it in the lower-middle tier of all possible configurations, which aligns with its mid-range components.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a complete picture of this combo's capabilities in The Technomancer. The performance is heavily dependent on the resolution and the graphics preset.

At 1920x1080, the combo is most comfortable. The Low preset yields an average of 130 FPS, which is excellent for high-refresh-rate monitors. Moving to Medium drops the average to 100 FPS, with a minimum of 85 and a maximum of 115. The High preset achieves an average of 85 FPS, still very smooth. The Ultra preset is the most demanding at this resolution, but it still manages an average of 67 FPS, which is playable for most users.

At 2560x1440, the performance takes a noticeable hit. The Low preset averages 85 FPS, which is still good. The Medium preset sees a significant drop to an average of 65 FPS, with a minimum of 56 FPS, indicating occasional dips below the 60 FPS mark. The High preset averages 56 FPS, which is on the edge of playability. The Ultra preset falls to an average of 44 FPS, which is not ideal for a smooth action RPG experience.

At 3840x2160, the GPU is clearly overburdened. The Low preset is the only one that provides a somewhat playable experience, with an average of 47 FPS. The Medium preset averages 36 FPS, with a minimum of 31 and a maximum of 41. The High preset drops to an average of 31 FPS. The Ultra preset is the worst, with an average of just 24 FPS, making it effectively unplayable for a game requiring timing and responsiveness.

How This Combo Ranks — use comboRankInGame vs other tested combos

The data places this Ryzen 5 7400F + RX 6600 combination at rank 2193 out of 2825 tested combos in The Technomancer. This percentile position is a direct reflection of the GPU's mid-range standing. While the CPU is in the 83rd percentile of all processors, the GPU is in the 63rd percentile, and the game's performance is heavily GPU-bound at higher resolutions. This means the combo is not capable of competing with high-end systems that pair flagship CPUs with top-tier GPUs.

This rank suggests that the combo is positioned in the lower-middle portion of the performance spectrum for this specific title. It outperforms the bottom 632 combos, but it is behind the majority of tested systems. The bottleneck is clearly the Radeon RX 6600. The CPU could likely support a more powerful GPU, as its performance is not a limiting factor at the resolutions tested. This is a typical pairing for a balanced mid-range build, but in a demanding title like The Technomancer, the GPU's limitations cap the overall experience.

The rank of 2193 also implies that there are many other combinations that will provide a better experience, particularly at 1440p and above. For users with this hardware, the focus should be on optimizing settings to work within the GPU's capabilities, rather than expecting to max out the game at higher resolutions. The combo is workable, but it is not a high performer in this game's context.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS, the optimal experience for this combo depends entirely on your display resolution and performance target. For a consistent 60 FPS experience, 1920x1080 with the High preset is the best choice. It delivers an average of 85 FPS, providing a comfortable margin above the 60 FPS target to avoid noticeable dips. The Ultra preset at 1080p is also viable, with an average of 67 FPS, but the High preset offers a more stable buffer.

If you are playing on a 2560x1440 monitor, the Medium preset is the most balanced option. It provides an average of 65 FPS, but the minimum of 56 FPS indicates it will occasionally drop below 60. The Low preset at 1440p is the only other option that guarantees an average above 60 FPS (85 FPS), but it comes with a significant visual downgrade. The High and Ultra presets at this resolution are not recommended for a smooth experience, as their averages fall below 60 FPS.

For 3840x2160 displays, the data suggests that a smooth experience is not feasible. The Low preset is the only option that breaks the 30 FPS barrier, averaging 47 FPS, but it will still feel less responsive. The Medium preset (36 FPS) and High preset (31 FPS) are not recommended for a game that requires combat precision. The Ultra preset at 24 FPS is unplayable by most standards.

In summary, the best experience per the measured data is achieved at 1080p. Using the High preset provides a great balance of visual fidelity and performance. At 1440p, you must compromise to Medium settings to stay near the 60 FPS line. At 4K, you are limited to Low settings, which is not an ideal way to experience the game. This hardware is best suited for 1080p gaming, where it can deliver a consistently smooth and visually pleasing performance.