The Technomancer

The Technomancer places this AMD Ryzen 5 5600 + NVIDIA GeForce GTX 1070 combination in a demanding position within the benchmark database. With a combo rank of 1400 out of 1656 tested configurations, this system sits in the lower 16% of all recorded pairings for this specific Action RPG. The data suggests that while the hardware is competent for general use, it struggles to deliver fluid gameplay at higher visual standards, particularly at elevated resolutions. This is a pairing that demands careful settings management to achieve a playable experience, as the measured frame rates vary dramatically based on resolution and quality preset.

How This Combo Ranks

The rank of 1400 out of 1656 combos indicates that this system is outperformed by the vast majority of tested configurations in The Technomancer. This places it firmly in the lower tier of performance, meaning users should expect significant compromises. The ranking reflects a fundamental mismatch between the game's demands and the GPU's capabilities at higher settings. While the CPU is far from a bottleneck in absolute terms, the combination's overall score is dragged down by the graphics card's inability to maintain high frame rates when the visual load increases. The data shows that this combo is only suitable for smooth gameplay at 1080p with reduced settings, or at lower resolutions with minimal quality. For context, the system's standing suggests that most other hardware pairings tested will offer a more consistent and higher-performing experience in this specific game.

GPU Role

The NVIDIA GeForce GTX 1070 is the primary performance limiter in this pairing. Its 8 GB of GDDR5 memory on a 256-bit bus provides a memory bandwidth of 256.3 GB/s, which is adequate for 1080p but becomes a constraint at higher resolutions. The GPU's base clock of 1506 MHz and boost clock of 1683 MHz are from the Pascal architecture, and the benchmark data confirms its mid-range standing with a percentile of 51 against all GPUs. The measured FPS results in The Technomancer clearly show the GPU's workload scaling: at 1080p Low, it achieves 118.7 FPS, but this drops to 61.1 FPS at 1080p Ultra. This 57.6 FPS difference demonstrates how sensitive the card is to settings changes. Moving to 1440p, the average FPS at High is 49.5, which is just at the edge of playability. At 4K, the card is overwhelmed, with the High preset yielding only 28 FPS and Ultra dropping to 21.9 FPS. The GPU's 6.463 TFLOPS of FP32 performance and 107.7 GPixel/s pixel rate are simply not enough for the game's higher visual loads at these resolutions.

FAQ

Q: What is the best resolution for smooth gameplay with this combo?

A: The data shows that 1920x1080 is the only resolution where the system consistently maintains high frame rates. At 1080p Low, the average FPS is 118.7, and even at High it remains at 76.8 FPS, which is well within a smooth range.

Q: Can this system handle 1440p gaming in The Technomancer?

A: It can, but with significant compromises. At 1440p Medium, the average FPS is 57, which is playable. However, at 1440p High, the average drops to 49.5 FPS, and at Ultra it falls to 40.5 FPS, which may feel less fluid for some users.

Q: Is 4K gaming possible with this hardware?

A: Technically yes, but the experience is poor. The best 4K result is on Low settings at 40.4 FPS average. High settings yield 28 FPS, and Ultra drops to 21.9 FPS, making the game nearly unplayable at that resolution.

Q: How does the GTX 1070 compare to its nearest rivals?

A: The GTX 1070's average benchmark score is 12331. It is 0.7% ahead of the NVIDIA Quadro K4200 and 1.3% behind the NVIDIA GeForce GTX 880M. It trails the GeForce GTX 1650 SUPER by 1.4%.

Q: What is the CPU's contribution to gaming performance here?

A: The AMD Ryzen 5 5600 is a strong performer, with a percentile of 79 against all CPUs and an average benchmark score of 21765. Its 6 cores and 12 threads are more than sufficient for this game, meaning the GPU is the bottleneck in most scenarios.

Q: What is the minimum FPS data available?

A: The measured FPS data for this game does not include minimum or maximum FPS values, only the average FPS for each resolution and settings combination.

Settings Recommendations

For the best balance of visual quality and performance, the 1920x1080 resolution with the High preset is the recommended target. The data shows an average of 76.8 FPS at this setting, which provides a smooth experience while retaining a good level of graphical detail. Users seeking higher frame rates can drop to Medium, which yields 88.4 FPS, or Low for 118.7 FPS. At 1440p, the Medium preset is the safest choice, delivering 57 FPS average, which is acceptable for most players. Pushing to High at 1440p results in 49.5 FPS, which is borderline. The Ultra preset should be avoided at all resolutions above 1080p, as it causes significant frame rate drops. For 4K, only the Low preset is viable, and even then, the 40.4 FPS average is not ideal for fast-paced action. The data clearly indicates that the system's sweet spot is 1080p with High or Medium settings.

Measured FPS Breakdown

At 1920x1080, the system performs best. The Low preset delivers an average of 118.7 FPS, which is the highest result across all tests. Medium settings yield 88.4 FPS, and High settings produce 76.8 FPS. The Ultra preset drops to 61.1 FPS, which is still playable but shows the performance cost of maximum quality.

At 2560x1440, the performance drops significantly. Low settings average 78.7 FPS, which is still smooth. Medium settings average 57 FPS, providing a decent experience. High settings fall to 49.5 FPS, and Ultra drops to 40.5 FPS. The step from Low to Medium is a 21.7 FPS reduction, highlighting the GPU's strain with increased detail.

At 3840x2160, the system struggles. Low settings average 40.4 FPS, which is the only playable option. Medium settings drop to 31.3 FPS, High to 28 FPS, and Ultra to 21.9 FPS. The difference between 1080p Low and 4K Low is 78.3 FPS, demonstrating the massive performance penalty of 4K resolution on this GPU.

CPU Role

The AMD Ryzen 5 5600 is a capable processor that does not bottleneck the system in The Technomancer. Its 6 cores and 12 threads, based on the Zen 3 architecture, provide ample processing power for the game's logic. The CPU's base clock of 3.50 GHz and boost clock of 4.40 GHz are robust, and its performance benchmarks indicate a strong standing. With a percentile of 79 against all CPUs, it outperforms the vast majority of processors in the database. The CPU's average benchmark score of 21765 places it 0.6% ahead of the Intel Xeon D-1746TER and 0.9% ahead of the Intel Core i7-11700F. The data shows that in this game, the CPU is not the limiting factor; the GPU is. Even at 1080p Low where the GPU achieves 118.7 FPS, the CPU is capable of keeping up, as its single-thread score of 882 in 3dmark and 3256 in passmark suggest strong per-core performance. The 32 MB of shared L3 cache also helps with game data access. The CPU's role is to ensure that the GPU can operate at its full potential, and it does so without issue in this title.