The Technomancer
This combination offers playable performance with an average of 58 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 26 | 30 | 42 |
| 1440p QHD | 41 | 49 | 61 | 77 |
| 1080p Full HD | 63 | 76 | 91 | 115 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 5 5600GT + NVIDIA GeForce GTX 1070, In-Depth Analysis
The Technomancer, a 2016 Action RPG, presents a demanding workload that clearly exposes the balance between the AMD Ryzen 5 5600GT processor and the NVIDIA GeForce GTX 1070 graphics card. The measured frame rates across three resolutions and four quality presets provide a detailed look at where this combination excels and where it reaches its limits, with the data indicating a system that is primarily constrained by the GPU at higher settings.
Resolution Scaling
The performance drop from 1080p to 4K is steep and consistent, confirming that the GeForce GTX 1070 is the primary bottleneck in this pairing. At 1080p with Low settings, the combo produces an average of 115.1 FPS, which is a strong result. Moving to 1440p at the same Low preset, the average falls to 77.3 FPS, a reduction of approximately 33%. The scaling continues at 4K, where the average drops further to 42.2 FPS, which is about 45% lower than the 1440p result. This pattern of diminishing returns as resolution increases is a classic sign of GPU-bound performance.
The trend holds across all quality presets. At High settings, the average FPS goes from 76.2 at 1080p, to 48.9 at 1440p, and finally to 25.5 at 4K. The drop from 1440p to 4K is particularly severe, representing a 48% performance loss. This indicates that the GTX 1070's 8 GB of GDDR5 memory and its 256-bit memory bus are being saturated by the 4K frame buffer, leaving little headroom for the graphics pipeline. The data shows that the Ryzen 5 5600GT, with its 6 cores and 12 threads, is not the limiting factor at these resolutions; the frame rate is dictated almost entirely by the GPU's fill rate and memory bandwidth.
How This Combo Ranks
In the broader context of tested combinations, this specific pairing of the Ryzen 5 5600GT and GTX 1070 achieves a rank of 1398 out of 1656 combos in The Technomancer. This places it in the lower 16th percentile of all tested systems, indicating that while it can run the game, it is not a high-performance configuration by modern standards. The rank is a reflection of the GPU's age and position in the market, as the GTX 1070 sits at the 51st percentile among all GPUs in the database. This suggests that the combo's overall standing is dragged down by the graphics card, which is a mid-pack performer.
The CPU's own standing is much better, with the Ryzen 5 5600GT ranking in the 78th percentile among all CPUs. This discrepancy in percentile rankings between the CPU and GPU reinforces the idea that the system is GPU-limited. A more capable graphics card would likely allow the Ryzen 5 5600GT to push the combo's rank significantly higher. The processor's benchmark scores, such as a Cinebench R23 multi-core score of 17272 and a single-core score of 2438, suggest it has ample compute power for the game's logic, but this power is left untapped when the GPU is struggling to render frames.
GPU Role
The NVIDIA GeForce GTX 1070 is the defining component in this test, and its specifications explain the observed frame rates. The card features 8 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 256.3 GB/s. This memory configuration is adequate for 1080p and 1440p gaming, but the data shows it struggles with 4K resolution, where the average FPS at Ultra settings is just 22.9. The GPU's base clock is 1506 MHz with a boost clock of 1683 MHz, and it has 1920 shading units, which are relatively modest by today's standards.
The card's benchmark scores paint a picture of a mid-range performer. Its PassMark G3D score is 13498, and its average benchmark score is 12331. When compared to its nearest rivals, the GTX 1070 is just 0.7% ahead of the NVIDIA Quadro K4200, but 1.4% behind the NVIDIA GeForce GTX 1650 SUPER and 1.7% behind the NVIDIA Tesla K20Xm. These small deltaPct values indicate that the GTX 1070 is in a very tight performance cluster. In The Technomancer, this translates to playable frame rates at 1080p, but the card's architectural limits become apparent as the resolution and settings are increased.
Settings Recommendations
The measured data provides clear guidance on which settings offer the best balance between visual quality and performance. For a smooth 60 FPS target at 1080p, the Medium preset is the sweet spot, delivering an average of 90.9 FPS. This is a substantial 14.7 FPS improvement over the High preset's 76.2 average, and it comes with only a modest reduction in visual fidelity. While the High preset is also playable, the Medium preset provides a more comfortable margin above the 60 FPS threshold, ensuring consistent frame pacing.
At 1440p, the Medium preset is again the recommended choice, with an average of 60.5 FPS. This is right at the 60 FPS target, but the High preset drops to 48.9 FPS, which may feel less smooth. Pushing to 4K is not recommended for this combo. The Low preset at 4K produces an average of 42.2 FPS, but the High and Ultra presets drop to 25.5 and 22.9 FPS respectively, which are not playable for an action RPG. The data suggests that 1440p Medium is the practical ceiling for this combination, as it balances resolution and quality while maintaining a playable frame rate.
FAQ
Q: What is the best resolution and settings for a consistent 60 FPS experience?
A: The data shows that at 1920x1080 with Medium settings, the average FPS is 90.9, while at 2560x1440 with Medium settings, the average is 60.5. For a consistent 60 FPS, 1440p Medium is the highest target, but 1080p Medium offers more headroom.
Q: How does the GTX 1070 compare to its nearest rivals?
A: Based on the average benchmark score, the GTX 1070 is 0.7% ahead of the NVIDIA Quadro K4200. It is 1.4% behind the NVIDIA GeForce GTX 1650 SUPER and 1.7% behind the NVIDIA Tesla K20Xm.
Q: Is the CPU or GPU the main limiting factor in this game?
A: The data indicates a GPU bottleneck. The Ryzen 5 5600GT ranks in the 78th percentile among CPUs, while the GTX 1070 ranks in the 51st percentile among GPUs. The frame rates drop significantly with resolution, which is characteristic of GPU limitation.
Q: Can this combo handle 4K gaming in The Technomancer?
A: No, not at playable settings. The highest 4K average FPS is 42.2 on Low settings. At Ultra, the average drops to 22.9 FPS, which is not suitable for an action RPG.
Q: What is the performance difference between Low and Ultra settings at 1080p?
A: At 1920x1080, the Low preset averages 115.1 FPS, while the Ultra preset averages 62.5 FPS. This represents a significant performance cost for the highest visual quality.
Q: How much of a performance drop is there from 1080p to 4K at High settings?
A: The average FPS at 1080p High is 76.2, while at 4K High it is 25.5. This is a 67% reduction in performance, demonstrating the intense load that 4K resolution places on the GPU.
CPU Role
The AMD Ryzen 5 5600GT, with its 6 cores and 12 threads, provides a solid foundation for this gaming system. Its Zen 3 architecture, clocked at a base of 3.60 GHz and a boost of 4.60 GHz, is more than capable of handling the game's processing demands. The CPU's benchmark results, such as a Geekbench multi-core score of 7986 and a single-core score of 2035, indicate that it has strong single-threaded performance, which is often crucial for game logic and physics. Its average benchmark score of 20740 places it in the 78th percentile of all CPUs, showing that it is a well-above-average processor.
However, the CPU's potential is not fully realized in The Technomancer due to the GPU bottleneck. The 16 MB of L3 cache and the dual-channel DDR4 memory support provide ample data throughput for the processor. The CPU is also positioned competitively against its nearest rivals, with a 0% deltaPct compared to the Intel Core i7-10700, and a 0.3% lead over the AMD Ryzen 5 5600X. This shows that the 5600GT is a balanced performer. In this specific game, the CPU is waiting on the GPU to render frames, and its strong scores suggest that it would not be a limiting factor even with a faster graphics card. The data shows that for this combo, the CPU is a capable partner that is held back by the graphics card's performance ceiling.
Hardware Specifications
AMD Ryzen 5 5600GT
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600GT + NVIDIA GeForce GTX 1070 in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 42.2 |
| 3840x2160 | Medium | 30.3 |
| 3840x2160 | High | 25.5 |
| 3840x2160 | Ultra | 22.9 |
| 2560x1440 | Low | 77.3 |
| 2560x1440 | Medium | 60.5 |
| 2560x1440 | High | 48.9 |
| 2560x1440 | Ultra | 40.6 |
| 1920x1080 | Low | 115.1 |
| 1920x1080 | Medium | 90.9 |
| 1920x1080 | High | 76.2 |
| 1920x1080 | Ultra | 62.5 |
The Technomancer with GTX 1070 + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 5 5600GT + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.