Steamworld Build
This combination delivers exceptional performance with an average of 183 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 54 | 79 | 106 | 139 |
| 1440p QHD | 101 | 150 | 201 | 262 |
| 1080p Full HD | 159 | 236 | 315 | 391 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with Intel Core Ultra 5 225 + NVIDIA GeForce RTX 5080, In-Depth Analysis
Steamworld Build pairs the Intel Core Ultra 5 225 with the NVIDIA GeForce RTX 5080, a combination that delivers a wide spread of framerates depending on how aggressively you push the settings. The dataset shows this pairing lands at rank 117 out of 2924 tested combos, placing it in the top 4% of all configurations in this city builder. With a 10-core, 10-thread CPU and a 16 GB GDDR7 GPU, the system has substantial headroom, but the measured results reveal that the graphics card is the primary driver of performance across all tested resolutions. The following analysis breaks down exactly what the numbers indicate for each preset and resolution.
Settings Recommendations
The measured data shows a clear hierarchy across the four available presets, with the sweet spot for this combo sitting at Medium settings. At 2560x1440, Medium delivers an average of 201 FPS with a minimum of 171 FPS and a maximum of 231 FPS, which is the only preset at this resolution that provides both a high average and a documented floor above 60 FPS. High settings at the same resolution drop to 150 FPS average, still excellent, but the lack of a recorded minimum makes the Medium preset the safer choice for consistent frame pacing. The Ultra preset at 2560x1440 falls to 101 FPS average, which is playable but represents a 50% reduction from Medium, a steep cost for marginal visual gains in a genre where smooth camera panning matters more than pixel-perfect shadows.
At 3840x2160, the recommendation shifts to High settings, which produces an average of 79 FPS. This is the only 4K preset that stays comfortably above 60 FPS, while Medium at 4K sits at 106 FPS average but with a minimum of 90 FPS, and Ultra plummets to 54 FPS average. The Medium preset at 4K actually provides a better average than High, but the High preset's 79 FPS average is more than sufficient for a city builder, and the gap to Medium's 106 FPS is not worth the extra load on the RTX 5080 if you want to leave headroom for large, populated cities. Low settings are not recommended at any resolution; at 2560x1440 it hits 262 FPS average, but that level of performance is unnecessary and indicates the CPU is not the bottleneck.
For 1920x1080, the data shows diminishing returns from Medium upward. Medium hits 315 FPS average with a minimum of 268 FPS, while High drops to 236 FPS and Ultra to 159 FPS. The Medium preset at 1080p is the balanced choice, as it provides more than triple the refresh rate of most monitors while keeping the minimum frame time stable. The benchmark results indicate that this combo is heavily GPU-bound at higher presets, so the Medium setting is the optimal trade-off between visual quality and raw frame throughput, especially if you plan to use a high-refresh-rate display.
GPU Role
The NVIDIA GeForce RTX 5080 is the dominant component in this pairing, and the data underscores its importance. The GPU carries 16 GB of GDDR7 memory on a 256-bit bus, with a bandwidth of 960.0 GB/s. This memory configuration is crucial for Steamworld Build, where large maps and numerous entities can quickly fill video memory. The 16 GB capacity ensures that even at 4K with High settings, the card is unlikely to run out of memory, which is a common issue in city builders with long play sessions.
Clock speeds for the RTX 5080 are listed at 2295 MHz base and 2617 MHz boost, with memory running at 1875 MHz (30 Gbps effective). These numbers explain why the card can push 391 FPS at 1080p Low and still manage 139 FPS at 4K Low. The boost clock of 2617 MHz is what the card sustains under load, and the measured FPS numbers suggest that the GPU is scaling predictably with resolution. The pixel rate of 293.1 GPixel/s and texture rate of 879.3 GTexel/s are high enough that even the Ultra preset at 1440p (101 FPS) is limited by the game's rendering pipeline rather than the hardware.
The GPU's percentile rank against all GPUs is 87, meaning it outperforms 87% of tested graphics cards. In the nearest rivals list, the RTX 5080 sits 0.6% ahead of the AMD Radeon 8060S and 2.3% ahead of the AMD Radeon Pro W5700X, while trailing the AMD Radeon RX 9070 GRE by 2.2%. These small deltas indicate that the RTX 5080 is firmly in the high-end tier, and the measured FPS in Steamworld Build reflects that positioning. The GPU's 56.28 TFLOPS of FP32 compute is more than sufficient for a city builder, which typically relies more on draw calls and memory bandwidth than raw shader throughput.
The RTX 5080 also has 84 RT cores and 336 tensor cores, though Steamworld Build is not a ray-traced title, so these features are unlikely to affect the measured results. The 10752 shading units and 336 TMUs are the workhorses here, and the data shows they are not the limiting factor until you push 4K Ultra, where the average drops to 54 FPS. That 4K Ultra result is the only point in the dataset where the GPU appears to be truly saturated, indicating that the card's 112 ROPs are the bottleneck at that extreme preset.
Resolution Scaling
The measured FPS data reveals a predictable scaling pattern from 1080p to 4K, with the RTX 5080 maintaining a strong curve. At High settings, the average FPS drops from 236 at 1920x1080 to 150 at 2560x1440 (a 36.4% reduction) and then to 79 at 3840x2160 (a 47.3% reduction from 1440p). This steepening decline as resolution increases is classic GPU-bound behavior, confirming that the CPU is not a limiting factor at these settings. The Core Ultra 5 225, with its 4.90 GHz boost clock and 20 MB of L3 cache, has more than enough single-thread performance to feed the GPU at 1080p, where the system reaches 391 FPS on Low.
At Medium settings, the scaling is similar but slightly less steep. FPS goes from 315 at 1080p to 201 at 1440p (36.2% drop) and then to 106 at 4K (47.3% drop from 1440p). The consistency of these percentage drops across settings suggests that the game's rendering load scales uniformly with pixel count, and the GPU is the sole arbiter of performance. The Low preset shows the least relative drop: 391 FPS at 1080p, 262 at 1440p (33% drop), and 139 at 4K (47% drop). Even at Low settings, the 4K result is more than double the 60 FPS target, showing that this combo has substantial headroom.
The Ultra preset tells a different story. At 1080p, Ultra hits 159 FPS, but this drops to 101 FPS at 1440p (36.5% drop) and then to 54 FPS at 4K (46.5% drop from 1440p). The 4K Ultra result is the only sub-60 FPS average in the entire dataset, and it indicates that the RTX 5080's 16 GB of memory and 960.0 GB/s bandwidth are not enough to sustain the highest preset at 4K without compromise. The data suggests that the limiting component shifts from the GPU's compute units at 1080p to its memory subsystem at 4K Ultra, as the game likely exceeds the card's ability to stream textures efficiently. For players targeting 4K, High settings are the practical ceiling, and the 79 FPS average reflects a balanced load.
Measured FPS Breakdown
At 1920x1080, the full range of presets is playable, with Low hitting 391 FPS average, Medium at 315 FPS (minimum 268, maximum 363), High at 236 FPS, and Ultra at 159 FPS. The Medium preset's documented minimum of 268 FPS is notably high, showing that even the worst-case frame time at this resolution is well above any display's refresh rate. The gap between Low and Medium is 76 FPS, while the gap between Medium and High is 79 FPS, and between High and Ultra is 77 FPS, showing a near-linear progression as settings increase.
At 2560x1440, the numbers are: Low at 262 FPS, Medium at 201 FPS (minimum 171, maximum 231), High at 150 FPS, and Ultra at 101 FPS. The Medium preset's minimum of 171 FPS is still above 144 Hz, making it ideal for high-refresh-rate 1440p monitors. High at 150 FPS is also excellent, but the lack of a documented minimum means we cannot guarantee frame consistency. Ultra at 101 FPS is the first preset to dip below the 120 FPS mark, and while it remains smooth, the visual uplift from High is not reflected in the data.
At 3840x2160, the results are more constrained: Low at 139 FPS, Medium at 106 FPS (minimum 90, maximum 122), High at 79 FPS, and Ultra at 54 FPS. The Medium preset's minimum of 90 FPS is the only 4K result with a documented floor above 60, making it the safest choice for 4K gaming. High at 79 FPS is playable but leaves less headroom for late-game cities with hundreds of buildings. Ultra at 54 FPS is the only preset in the entire dataset that fails to hold 60 FPS, and the 90 FPS minimum on Medium suggests that the card's memory bandwidth is the limiting factor at this resolution. The data shows a clear pattern: the RTX 5080 can handle 4K High without issues, but Ultra is beyond its reach in this title.
How This Combo Ranks
The Intel Core Ultra 5 225 and RTX 5080 combination ranks 117th out of 2924 tested combos in Steamworld Build, placing it in the top 4% of all configurations. This high rank is driven primarily by the GPU, as the CPU's percentile rank of 85 against all CPUs is solid but not exceptional. The CPU's average benchmark score of 36938 is nearly identical to its nearest rival, the AMD Ryzen 5 5600F, which scores 36945 (0% delta), and slightly below the AMD Ryzen 5 5500X3D at 37018 (-0.2% delta). The Intel Core i9-12900T is also close at 37112 (-0.5% delta), indicating that the Core Ultra 5 225 is well-matched in performance to these mid-range options.
The GPU's percentile rank of 87 is higher than the CPU's, and its average benchmark score of 56083 is 0.6% ahead of the AMD Radeon 8060S and 0.7% ahead of the AMD Radeon RX 6750 GRE 12 GB. The RTX 5080 trails the AMD Radeon RX 9070 GRE by 2.2%, but this small gap does not meaningfully affect in-game performance. The combo rank of 117 is consistent with these individual ranks, as the GPU's strength outweighs the CPU's mediocrity in a title that is clearly GPU-bound at most settings.
The data shows that this combo is not limited by the CPU in any of the measured scenarios. At 1080p Low, the system reaches 391 FPS, which is far beyond what the CPU's 10 threads could bottleneck, and even at 4K Ultra (54 FPS), the GPU is the clear constraint. The rank of 117 suggests that there are 116 combos that perform better, likely featuring higher-end CPUs like the Core i9 or Ryzen 9 parts, but the Core Ultra 5 225's 10 cores and 4.90 GHz boost clock are sufficient for Steamworld Build's simulation and rendering demands. For a city builder where frame rates above 60 FPS are the norm, this combo's rank is a strong indicator of a smooth experience.
FAQ
Q: What is the best settings preset for 1440p gaming?
A: The Medium preset at 2560x1440 delivers an average of 201 FPS with a minimum of 171 FPS and a maximum of 231 FPS, making it the best balance of visual quality and frame consistency. High settings at 1440p drop to 150 FPS average, but the lack of a documented minimum makes Medium the safer choice.
Q: Can this combo handle 4K at 60 FPS?
A: Yes, but not on Ultra settings. At 3840x2160, High settings produce an average of 79 FPS, Medium produces 106 FPS, and Low produces 139 FPS. Ultra settings drop to 54 FPS average, which is below the 60 FPS target, so High or Medium is recommended for 4K.
Q: Is the CPU or GPU the limiting factor in this game?
A: The GPU is the limiting factor at all tested resolutions and settings. The RTX 5080's performance scales consistently with resolution, while the Core Ultra 5 225's 10 threads are sufficient to feed the GPU even at 1080p Low, where the system reaches 391 FPS average.
Q: How does this combo rank compared to other tested systems?
A: This combination ranks 117th out of 2924 tested combos, placing it in the top 4%. The GPU's percentile rank of 87 and the CPU's rank of 85 both contribute to this high placement, with the GPU being the stronger component.
Q: What is the highest FPS recorded in the dataset?
A: The highest average FPS is 391, achieved at 1920x1080 with Low settings. The Medium preset at 1080p reaches 315 FPS with a maximum of 363 FPS, and High at 1080p hits 236 FPS.
Q: Why does the 4K Ultra preset fail to hold 60 FPS?
A: The 4K Ultra preset averages 54 FPS, and the data suggests the RTX 5080's 16 GB of GDDR7 memory and 960.0 GB/s bandwidth are not sufficient to sustain the highest preset at 4K. The Medium preset at 4K shows a minimum of 90 FPS, indicating that the memory subsystem is the bottleneck at Ultra.
Hardware Specifications
Intel Core Ultra 5 225
NVIDIA GeForce RTX 5080
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 5 225 + NVIDIA GeForce RTX 5080 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 139.0 |
| 3840x2160 | Medium | 106.0 |
| 3840x2160 | High | 79.0 |
| 3840x2160 | Ultra | 54.0 |
| 2560x1440 | Low | 262.0 |
| 2560x1440 | Medium | 201.0 |
| 2560x1440 | High | 150.0 |
| 2560x1440 | Ultra | 101.0 |
| 1920x1080 | Low | 391.0 |
| 1920x1080 | Medium | 315.0 |
| 1920x1080 | High | 236.0 |
| 1920x1080 | Ultra | 159.0 |
Steamworld Build with iUltra 5 225 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5080 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with iUltra 5 225 + RTX 5080
Explore FPS benchmarks for other games using this same hardware combination.