Steamworld Build

Steamworld Build

AVERAGE FPS
119
good

This combination provides smooth gameplay with an average of 119 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 57 77 100
1440p QHD 73 109 145 171
1080p Full HD 115 162 180 198

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 100
3840x2160 Medium 77
3840x2160 High 57
3840x2160 Ultra 39
2560x1440 Low 171
2560x1440 Medium 145
2560x1440 High 109
2560x1440 Ultra 73
1920x1080 Low 198
1920x1080 Medium 180
1920x1080 High 162
1920x1080 Ultra 115

Steamworld Build with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3080, In-Depth Analysis

# Steamworld Build with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3080

This combination pairs AMD's six-core Zen+ architecture from 2018 with NVIDIA's Ampere flagship from 2020, creating a pairing where the GPU's architecture is two generations newer than the CPU's. The measured frame rates across resolutions and settings reveal a system that behaves differently depending on the workload imposed by Steamworld Build's city-building simulation.

Resolution Scaling

The frame rate progression from 1080p to 4K shows how this combo's performance ceiling shifts as pixel count increases. At High settings, the system delivers 162 FPS at 1920x1080, drops to 109 FPS at 2560x1440, and falls further to 57 FPS at 3840x2160. That represents a 65% reduction from 1080p to 4K, indicating the GPU becomes progressively more stressed as resolution climbs.

Looking at Low settings, the scaling is even more dramatic: 198 FPS at 1080p, 171 FPS at 1440p, and 100 FPS at 4K. The 4K result is roughly half the 1080p figure, which suggests that at Low settings the RTX 3080 is still the primary limiter even at 1080p, since the frame rates do not plateau or become CPU-bound at lower resolutions. The 1080p Low result of 198 FPS is high enough that a six-core Ryzen 5 2600 with a 3.90 GHz boost clock could be approaching its ceiling, but the continued scaling downward from 198 to 171 to 100 shows the GPU still has headroom to lose as resolution increases.

Medium settings provide the most complete data with min and max FPS recorded. At 1080p Medium, the average is 180 FPS with a range of 153 to 207. At 1440p Medium, the average drops to 145 FPS, ranging from 123 to 167. At 4K Medium, the average falls to 77 FPS with a range of 65 to 88. The consistency of the frame ranges suggests stable performance rather than erratic spikes, which is typical for a city builder where the simulation load is spread across many entities.

Ultra settings show the steepest resolution penalty: 115 FPS at 1080p, 73 FPS at 1440p, and 39 FPS at 4K. The 4K Ultra result is the only measured frame rate below 40 FPS, and it represents a 66% drop from 1080p Ultra. This pattern indicates that at Ultra quality, the RTX 3080's 10 GB of GDDR6X memory and 760.3 GB/s bandwidth are being pushed hard, while the CPU's role diminishes relative to the GPU's rendering load.

The data shows that the limiting component shifts depending on settings and resolution. At 1080p Low, the CPU's six cores and twelve threads may be constraining the 198 FPS result, but at 4K Ultra the GPU is clearly the bottleneck with only 39 FPS. The Ryzen 5 2600's 16 MB of shared L3 cache and Zen+ architecture are sufficient to feed the RTX 3080 at lower resolutions, but the GPU's 8704 shading units become the dominant factor as pixel count multiplies.

How This Combo Ranks

Within the database of 3,706 tested combinations for Steamworld Build, this pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3080 sits at rank 1,342. That places it in the upper third of all tested combos, though not in the top tier. The rank reflects the balance between a CPU that scores in the 75th percentile against all CPUs and a GPU that scores in the 68th percentile against all GPUs.

The CPU's average benchmark score of 21,484 places it within 0.2% of the Intel Core Ultra 5 228V, which scores 21,440. It is 0.5% ahead of the Intel Core i9-11900H at 21,367, and 1.2% ahead of the AMD EPYC 9454 at 21,223. The closest rival is the Intel Xeon D-1746TER, which scores 21,635 and sits 0.7% above the Ryzen 5 2600. These narrow margins indicate that the CPU's raw compute performance is competitive with a range of modern processors, though the Zen+ architecture lacks the newer instruction sets found in later generations.

The GPU's average benchmark score of 23,172 is nearly identical to its nearest rivals. The NVIDIA P106-100 scores 23,249, which is 0.3% higher. The AMD Radeon Pro Vega 16 scores 23,250, also 0.3% higher. The AMD Radeon RX 6600M scores 23,273 at 0.4% higher, and the AMD Radeon R9 M290X scores 23,276 at 0.4% higher. These sub-1% deltas are within measurement noise, meaning the RTX 3080's benchmark performance is effectively tied with these four other GPUs despite their vastly different architectures and market positions.

The combination rank of 1,342 out of 3,706 suggests that while each component individually performs near its peers, the pairing in Steamworld Build produces results that are better than 63.8% of all tested combos. The measured FPS data confirms this is a playable combination at most settings, with only 4K Ultra dipping below 40 FPS.

CPU Role

The AMD Ryzen 5 2600 provides six cores and twelve threads, running at a base clock of 3.40 GHz and boosting to 3.90 GHz. Built on GlobalFoundries' 12 nm process with 4,800 million transistors across a 213 mm² die, this Zen+ processor uses the AM4 socket and supports dual-channel DDR4 memory with 46.9 GB/s of bandwidth. The cache hierarchy includes 96 KB of L1 per core, 512 KB of L2 per core, and 16 MB of shared L3 cache.

In Steamworld Build, a city builder genre that typically relies on simulation logic, the CPU's multi-threaded performance is relevant. The Cinebench R15 multi-core score of 1,248 and Geekbench multi-core score of 5,648 indicate solid parallel throughput for a six-core part. The PassMark multi-thread score of 13,160 and floating point math score of 22,942 suggest the CPU can handle the continuous calculations required by a city simulation.

However, the single-thread performance is more modest. The Cinebench R15 single-core score of 157.3 and Geekbench single-core score of 1,154 place it behind more modern architectures. The PassMark single-thread score of 2,239 and find prime numbers score of 37 indicate that per-core performance is not the Ryzen 5 2600's strength. For a game like Steamworld Build, which may have a primary simulation thread, this could limit maximum frame rates even when the GPU has headroom.

The 1080p Low result of 198 FPS is the closest the data comes to showing a CPU limit. At 1080p Ultra, the system still achieves 115 FPS, which means the CPU can feed the GPU enough data to maintain high frame rates at lower resolutions. The 4K Low result of 100 FPS, compared to the 4K Ultra result of 39 FPS, shows that at 4K the GPU is the dominant factor regardless of settings, since even Low settings at 4K require more pixel throughput than the CPU can bottleneck.

The nearest rival scores show the Ryzen 5 2600 is within 1.2% of the AMD EPYC 9454, a server-class processor, and within 0.7% of the Intel Xeon D-1746TER. This indicates that for Steamworld Build's CPU demands, the Ryzen 5 2600's six cores are sufficient to avoid severe bottlenecks, though the 3.90 GHz boost clock is modest compared to newer CPUs.

FAQ

Q: What is the best resolution to play Steamworld Build with this combo?

A: The data shows 2560x1440 at High settings delivers 109 FPS, which is well above 60 FPS while providing better visual fidelity than 1080p. At 4K High, the average drops to 57 FPS, which is still playable but closer to the 60 FPS threshold.

Q: Does the CPU or GPU limit performance more in this game?

A: At 1080p Low, the 198 FPS result suggests the CPU may be nearing its limit, but at 4K Ultra with 39 FPS, the GPU is clearly the bottleneck. The resolution scaling from 162 to 109 to 57 FPS at High settings shows the GPU becomes more limiting as resolution increases.

Q: How does the Ryzen 5 2600 compare to its nearest rivals?

A: The Ryzen 5 2600's average benchmark score of 21,484 is 0.7% below the Intel Xeon D-1746TER (21,635), 0.2% above the Intel Core Ultra 5 228V (21,440), 0.5% above the Intel Core i9-11900H (21,367), and 1.2% above the AMD EPYC 9454 (21,223).

Q: Is 4K Ultra playable with this combination?

A: The measured 4K Ultra average is 39 FPS, which is below the 60 FPS standard but may be acceptable for a city builder. For smoother performance, 4K Medium at 77 FPS or 1440p Ultra at 73 FPS are better options.

Q: What frame rates can be expected at 1440p?

A: At 1440p, the system delivers 171 FPS on Low, 145 FPS on Medium (ranging from 123 to 167), 109 FPS on High, and 73 FPS on Ultra. All settings are above 60 FPS at this resolution.

Q: How much variation is there between settings at 1080p?

A: At 1080p, the range spans from 198 FPS on Low to 115 FPS on Ultra. Medium settings produce 180 FPS with a range of 153 to 207, while High settings deliver 162 FPS. The gap between Low and Ultra is 83 FPS.

GPU Role

The NVIDIA GeForce RTX 3080 uses the GA102 chip built on Samsung's 8 nm process with 28,300 million transistors across a 628 mm² die. The GPU runs at a base clock of 1440 MHz and boosts to 1710 MHz, with memory clocked at 1188 MHz for 19 Gbps effective data rate. The 10 GB of GDDR6X memory operates across a 320-bit bus, providing 760.3 GB/s of bandwidth.

With 8704 shading units, 272 texture mapping units, and 96 raster operation units, the RTX 3080 has substantial raw rendering power. The 68 ray tracing cores and 272 tensor cores add specialized processing capabilities, though Steamworld Build's city builder genre likely relies more on traditional rasterization. The pixel rate of 164.2 GPixel/s and texture rate of 465.1 GTexel/s support the measured frame rates across all settings.

The GPU's 29.77 TFLOPS of FP32 performance is a key indicator of its compute capability. This is reflected in the OpenCL benchmark score of 152,423 and Vulkan score of 33,620. The PassMark G3D score of 25,086 places the RTX 3080 in the 68th percentile against all GPUs, with an average benchmark score of 23,172 that is nearly identical to its nearest rivals.

In Steamworld Build, the GPU's role becomes more prominent at higher resolutions and settings. The 4K Ultra result of 39 FPS shows the limits of the 10 GB VRAM and the GPU's compute throughput when pushing 8.3 million pixels with maximum visual effects. The 4K Medium result of 77 FPS indicates that reducing settings from Ultra to Medium nearly doubles performance, suggesting that the Ultra preset imposes significant rendering costs.

The nearest rival comparisons show the RTX 3080's benchmark scores are within 0.4% of four other GPUs: the NVIDIA P106-100, AMD Radeon Pro Vega 16, AMD Radeon RX 6600M, and AMD Radeon R9 M290X. Despite the RTX 3080's much higher specifications on paper, the benchmark deltas are negligible, which may reflect the specific workload characteristics of Steamworld Build or the benchmark methodology.

The GPU's 320 W TDP and suggested 700 W PSU indicate this is a power-hungry component, but the measured performance justifies the power draw for users seeking high frame rates at 1440p or 4K. The PCIe 4.0 x16 interface provides ample bandwidth, though the Ryzen 5 2600 only supports PCIe Gen 3, which is backward compatible but may slightly limit data transfer rates.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and frame rate preference. At 1920x1080, all settings produce frame rates above 115 FPS, making Ultra the best choice for visual quality without sacrificing smoothness. The 115 FPS Ultra result is well above the 60 FPS threshold, and even the most demanding preset delivers a fluid experience.

At 2560x1440, High settings provide the best balance with 109 FPS average. Ultra at 73 FPS is still playable, but the drop from High to Ultra represents a 33% performance loss. Medium settings at 145 FPS offer a high-refresh-rate option for users with 144 Hz monitors, though the visual fidelity reduction may be noticeable. Low at 171 FPS is only necessary for competitive play or extremely high refresh rates.

At 3840x2160, High settings at 57 FPS is the highest quality that remains near 60 FPS. Medium at 77 FPS provides a comfortable margin above 60 FPS and is the recommended setting for 4K play. Ultra at 39 FPS is playable for a city builder where reaction time is not critical, but the frame rate may feel sluggish. Low at 100 FPS is available for users who prioritize smoothness over visuals at 4K.

The data shows a consistent pattern: Medium settings offer the most reliable frame rates with recorded min/max values that show narrow ranges. At 1080p Medium, the range is 153 to 207 FPS. At 1440p Medium, it is 123 to 167 FPS. At 4K Medium, it is 65 to 88 FPS. These ranges indicate stable performance without major frame drops, making Medium a safe choice across all resolutions.

For the best overall experience, 1440p High at 109 FPS provides high visual quality with excellent smoothness. For 4K users, 4K Medium at 77 FPS is the recommended compromise, delivering 4K resolution with frame rates that clear the 60 FPS bar. The Ultra preset is only advisable at 1080p, where 115 FPS remains fluid.

Measured FPS Breakdown

The complete measured FPS data for this combination is as follows:

At 1920x1080, Low settings produce an average of 198 FPS. Medium settings average 180 FPS with a range of 153 to 207 FPS. High settings average 162 FPS. Ultra settings average 115 FPS. The spread from Low to Ultra is 83 FPS, with each settings tier reducing performance by roughly 10-15% from the previous tier.

At 2560x1440, Low settings average 171 FPS. Medium settings average 145 FPS with a range of 123 to 167 FPS. High settings average 109 FPS. Ultra settings average 73 FPS. The drop from Low to Ultra is 98 FPS, a larger absolute gap than at 1080p, reflecting the increased GPU load at higher resolution.

At 3840x2160, Low settings average 100 FPS. Medium settings average 77 FPS with a range of 65 to 88 FPS. High settings average 57 FPS. Ultra settings average 39 FPS. The Low to Ultra spread is 61 FPS, but the relative drop is more severe, with Ultra delivering only 39% of the Low performance.

Comparing across resolutions at the same settings reveals the scaling factors. At Low settings, 1080p to 1440p reduces performance by 13.6% (198 to 171 FPS), and 1440p to 4K reduces it by 41.5% (171 to 100 FPS). At High settings, 1080p to 1440p reduces performance by 32.7% (162 to 109 FPS), and 1440p to 4K reduces it by 47.7% (109 to 57 FPS). At Ultra settings, 1080p to 1440p reduces performance by 36.5% (115 to 73 FPS), and 1440p to 4K reduces it by 46.6% (73 to 39 FPS).

The Medium settings data, which includes min and max FPS, shows the frame consistency. At 1080p, the 153 to 207 FPS range has a 54 FPS spread. At 1440p, the 123 to 167 FPS range has a 44 FPS spread. At 4K, the 65 to 88 FPS range has a 23 FPS spread. The narrowing range at higher resolutions indicates that the GPU's workload becomes more uniform as pixel count increases, reducing the impact of scene complexity variations.

These measured results confirm that the RTX 3080 dominates the performance profile, with the Ryzen 5 2600 providing sufficient CPU support for the simulation aspects of Steamworld Build. The combination ranks 1,342 out of 3,706 tested combos, placing it in the upper third of all configurations tested for this game.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3080

VRAM 10 GB GDDR6X
Base Clock —
Boost Clock 1710 MHz MHz
TDP 320 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 3080 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 100.0
3840x2160 Medium 77.0
3840x2160 High 57.0
3840x2160 Ultra 39.0
2560x1440 Low 171.0
2560x1440 Medium 145.0
2560x1440 High 109.0
2560x1440 Ultra 73.0
1920x1080 Low 198.0
1920x1080 Medium 180.0
1920x1080 High 162.0
1920x1080 Ultra 115.0

Steamworld Build with Ryzen 5 2600 + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 3080 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RTX 3080

Explore FPS benchmarks for other games using this same hardware combination.