Steamworld Build

Steamworld Build

AVERAGE FPS
133
excellent

This combination delivers exceptional performance with an average of 133 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 56 77 99
1440p QHD 76 108 146 188
1080p Full HD 116 169 231 291

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 99
3840x2160 Medium 77
3840x2160 High 56
3840x2160 Ultra 40
2560x1440 Low 188
2560x1440 Medium 146
2560x1440 High 108
2560x1440 Ultra 76
1920x1080 Low 291
1920x1080 Medium 231
1920x1080 High 169
1920x1080 Ultra 116

Steamworld Build with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 3080, In-Depth Analysis

# How This Combo Ranks

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 3080 places 514th out of 1730 tested combos in Steamworld Build. That puts it in the upper third of all configurations tested for this city builder, which is a strong showing for a mid-generation pairing. The combo sits at roughly the 70th percentile of tested systems, meaning it outperforms the majority of setups while still leaving headroom above it for higher-end hardware.

What makes this rank notable is the balance between the two components. The Ryzen 5 5600's average benchmark score of 21765 places it at the 79th percentile among all CPUs, while the RTX 3080's average benchmark score of 35787 puts it at the 80th percentile among all GPUs. Both parts are closely matched in relative standing, which means neither is dramatically holding back the other in this particular game. The combo rank of 514 reflects that equilibrium—it's not a lopsided pairing where one component drags the other down.

In the CPU's nearest rival comparisons, the Ryzen 5 5600 sits within a tight cluster. It trails the Intel Core i7-11700F by 0.9% but leads the AMD EPYC 9554P by 0.6% and the AMD EPYC 9534 by 0.6%. These are negligible differences in synthetic benchmarks, and they suggest the 5600 is positioned exactly where you'd expect for its class. The GPU similarly sits in a narrow band: the RTX 3080 is 0.9% behind the AMD Radeon RX 7900 GRE and 1% ahead of the NVIDIA GeForce RTX 5070 Ti Mobile, with the AMD Radeon Pro Duo just 0.2% ahead.

GPU Role

The RTX 3080 carries the bulk of the rendering workload in Steamworld Build, and its memory configuration is central to how it performs. With 10 GB of GDDR6X on a 320-bit bus, the card delivers 760.3 GB/s of bandwidth. That memory bandwidth is substantial for a city builder, where large numbers of on-screen objects and detailed textures can strain memory throughput. The GDDR6X memory runs at 1188 MHz, translating to 19 Gbps effective, which is a fast enough data rate to keep the GPU's 8704 shading units fed at high resolutions.

The GPU's clock behavior is worth noting for this game. The base clock sits at 1440 MHz with a boost up to 1710 MHz. In Steamworld Build, the measured FPS scales predictably with these clocks—the card's boost capability is what allows it to push past 100 FPS at 1440p in higher presets. The architecture behind this is Ampere, built on Samsung's 8 nm process with 28,300 million transistors on a 628 mm² die. That's a large, power-hungry chip with a 320 W TDP, and it shows in the raw compute figures: 29.77 TFLOPS of FP32 performance and 465.1 GTexel/s of texture rate.

For Steamworld Build specifically, the GPU's 68 RT cores and 272 tensor cores are present but not heavily utilized—this is a city builder, not a ray-traced shooter. What matters more is the raw rasterization throughput, and the RTX 3080's 96 ROPs and 164.2 GPixel/s pixel rate handle the draw calls and object rendering that city builders throw at them. The 8 nm process node and 628 mm² die size mean this card runs hot and draws significant power, but the performance data justifies the thermal design.

FAQ

Q: Can this combo run Steamworld Build at 4K smoothly?

A: At 3840x2160 with High settings, the average FPS is 56.2, which is playable but not ideal for those who prefer 60 FPS. Dropping to Medium raises that to 76.6 FPS average, while Low reaches 99 FPS. Ultra at 4K drops to 39.6 FPS, which is below the smooth threshold.

Q: What is the best resolution for this pairing?

A: At 2560x1440, the combo delivers 107.6 FPS on High and 146.1 FPS on Medium, making it the sweet spot for high-refresh monitors. At 1920x1080, it exceeds 168 FPS on High and hits 291.2 FPS on Low, which is more than enough for any display.

Q: How does the Ryzen 5 5600 compare to its closest CPU rivals?

A: The 5600's average benchmark score of 21765 is 0.6% higher than the AMD EPYC 9554P and 0.6% higher than the AMD EPYC 9534, but 0.9% lower than the Intel Core i7-11700F. These are all within a 2% band, making them effectively equivalent in synthetic tests.

Q: Is the RTX 3080's 10 GB VRAM sufficient for this game?

A: The data shows no VRAM-related performance drops in the measured FPS. The 10 GB GDDR6X with 760.3 GB/s bandwidth handles all tested presets up to 4K Ultra without causing FPS to collapse, though Ultra at 4K does drop to 39.6 FPS due to overall GPU load.

Q: How does the RTX 3080 rank against its nearest GPU competitors?

A: The RTX 3080's average benchmark score of 35787 is 0.2% behind the AMD Radeon Pro Duo, 0.4% ahead of the AMD Radeon 880M, 0.9% behind the AMD Radeon RX 7900 GRE, and 1% ahead of the NVIDIA GeForce RTX 5070 Ti Mobile. All are within a 2% spread.

Q: What settings preset should I avoid with this combo?

A: Ultra at 3840x2160 produces only 39.6 FPS average, which is the only measured configuration that falls below 40 FPS. If you're at 4K, stick to High or Medium; at lower resolutions, Ultra is viable with 116.1 FPS at 1080p and 76 FPS at 1440p.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across the board. Low settings produce 291.2 FPS average, Medium drops to 231.1 FPS, High comes in at 168.5 FPS, and Ultra still manages 116.1 FPS. These numbers indicate that at 1080p, the RTX 3080 is rarely the bottleneck—even the most demanding preset stays well above 100 FPS, giving ample headroom for CPU-intensive city simulation logic.

Moving to 2560x1440, the scaling is predictable but still strong. Low settings yield 188.3 FPS average, Medium hits 146.1 FPS, High maintains 107.6 FPS, and Ultra falls to 76 FPS. The gap between Medium and High at 1440p is notable at 38.5 FPS, suggesting that the High preset introduces rendering features that cost meaningful performance without necessarily doubling visual quality.

At 3840x2160, the picture changes dramatically. Low settings still produce 99 FPS average, which is respectable for 4K. Medium drops to 76.6 FPS, High falls to 56.2 FPS, and Ultra bottoms out at 39.6 FPS. The step from High to Ultra at 4K costs 16.6 FPS, which is the largest single-preset drop in the entire measured set. This indicates that the Ultra preset's additional effects—likely higher shadow quality and draw distances—are particularly taxing at 4K resolution.

Across all resolutions, the pattern is consistent: Low to Medium costs roughly 20-25% performance, Medium to High costs another 25-30%, and High to Ultra costs a similar amount. The absolute numbers show that this combo is capable of 60+ FPS at 1440p on High, which is likely the target most users would choose for a city builder with complex simulation.

Settings Recommendations

The measured data points to a clear best experience depending on your display. For 1080p users, High settings at 168.5 FPS average is the recommended preset—it provides excellent visual quality while staying far above any refresh rate you'd reasonably use. Ultra at 116.1 FPS is also viable if you want maximum fidelity, but the 52.4 FPS difference between High and Ultra suggests diminishing returns.

For 1440p, High at 107.6 FPS average is the standout choice. It clears the 100 FPS mark comfortably and provides the full visual experience. Medium at 146.1 FPS is there if you prefer maximum smoothness, but High's combination of quality and speed is hard to argue with. Ultra at 76 FPS is playable but sacrifices 31.6 FPS over High for effects that may not be noticeable during normal gameplay.

At 4K, the recommendation is more nuanced. Medium at 76.6 FPS average is the best balance—it stays above 60 FPS and looks significantly better than Low. High at 56.2 FPS is acceptable if you insist on higher quality, but it risks dipping below 60 FPS in busy city scenes. Low at 99 FPS is the choice for esports-level smoothness, though it sacrifices visual richness. Ultra at 39.6 FPS should be avoided unless you're taking screenshots; it's simply too slow for interactive play.

The overall best experience across all resolutions is 1440p High. It delivers 107.6 FPS average, which is smooth, and the visual quality at that resolution with High settings is more than sufficient for a city builder's top-down perspective. If you have a 4K display, 4K Medium at 76.6 FPS is the pragmatic compromise.

CPU Role

The Ryzen 5 5600 provides the computational foundation for Steamworld Build's simulation layer. With 6 cores and 12 threads based on the Zen 3 architecture, this CPU has a base clock of 3.50 GHz and a boost clock of 4.40 GHz. The 32 MB of shared L3 cache is particularly relevant for city builders, where simulation state and pathfinding data benefit from fast, localized access. The 7 nm TSMC process and 4,150 million transistors on a 74 mm² die keep power consumption at 65 W TDP, which is efficient for the performance on offer.

In Steamworld Build, the CPU's role is less about raw FPS and more about maintaining consistent frame pacing as the city grows. The measured FPS at 1080p Low (291.2 FPS average) shows that the 5600 can feed the RTX 3080 enough data to hit extremely high frame rates, meaning the CPU is not a bottleneck at lower settings. The multi-threaded performance, indicated by a Cinebench R23 multicore score of 18309 and a 3DMark max threads score of 5659, provides the parallel processing headroom needed for AI, resource management, and building logic.

The CPU's single-thread performance is equally important. A Cinebench R23 single-core score of 2584 and a 3DMark single-thread score of 882 show that this chip handles the primary game thread efficiently. City builders often rely on a main simulation thread, and the 5600's 4.40 GHz boost clock ensures that thread runs at maximum speed. The DDR4 memory support with 51.2 GB/s bandwidth is sufficient for this game's needs, though notably, this platform tops out with DDR4 rather than moving to DDR5.

The Ryzen 5 5600's position in the CPU hierarchy is solid. Its 79th percentile ranking among all CPUs means it outperforms roughly four out of five processors in general benchmarks. In the context of this combo, that means the CPU is well-matched to the RTX 3080's 80th percentile GPU ranking. Neither component drastically outweighs the other, which is why this pairing achieves a balanced 514th rank out of 1730 tested combos. The CPU's 12 threads handle the game's simulation demands without holding back the GPU's rendering capabilities, as evidenced by the strong FPS numbers across all tested resolutions.

Hardware Specifications

AMD Ryzen 5 5600

Cores / Threads 6 / 12
Base Clock 3500 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3080

VRAM 10 GB GDDR6X
Base Clock —
Boost Clock 1710 MHz MHz
TDP 320 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce RTX 3080 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 99.0
3840x2160 Medium 76.6
3840x2160 High 56.2
3840x2160 Ultra 39.6
2560x1440 Low 188.3
2560x1440 Medium 146.1
2560x1440 High 107.6
2560x1440 Ultra 76.0
1920x1080 Low 291.2
1920x1080 Medium 231.1
1920x1080 High 168.5
1920x1080 Ultra 116.1

Steamworld Build with Ryzen 5 5600 + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 3080 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 5 5600 + RTX 3080

Explore FPS benchmarks for other games using this same hardware combination.