Rust

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 5060 produces a mid-pack result in Rust, landing at rank 784 out of 1717 tested combinations. This places the pairing in the 54th percentile of all tested combos, a position that reflects a balanced but not exceptional partnership. The benchmark data, measured across multiple resolutions and quality presets, reveals a system that scales predictably with both CPU and GPU demands, though the limiting factor shifts depending on the workload.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, built on TSMC's 7 nm process. With a base clock of 3.40 GHz and a boost clock of 4.90 GHz, this chip offers substantial multi-threaded throughput, which is reflected in its benchmark scores: a Cinebench R23 multi-core score of 38607 and a Geekbench multi-core score of 12084. The single-thread performance is also respectable, with a Cinebench R23 single-core score of 5450 and a Geekbench single-core score of 2211. This processor sits at the 93rd percentile among all CPUs, with an average benchmark score of 49062.

In Rust, the CPU's role is particularly pronounced at lower resolutions and quality settings, where the game's simulation and entity logic become the bottleneck. The data shows that at 1080p Low, the combo achieves 175.9 FPS, which is the highest frame rate recorded across all tested configurations. This suggests that the 5950X's 16 cores and high boost clock are sufficient to feed the RTX 5060 effectively when the GPU is not under heavy load. However, the processor's performance relative to its nearest rivals is tightly clustered: the Intel Core i5-14600K scores 49166 (a delta of -0.2%), the Intel Core i5-14600KF scores 49367 (-0.6%), the Intel Xeon Gold 5318H scores 48698 (+0.7%), and the AMD EPYC 4345P scores 49595 (-1.1%). This indicates that the 5950X is essentially performance-equivalent to its direct competitors, meaning any frame rate differences in Rust are more likely attributable to the GPU or game engine than to CPU headroom.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average FPS this combo achieves in Rust, and at what settings?

A: The highest recorded average FPS is 175.9, achieved at 1920x1080 with Low settings. This is significantly higher than the 98.7 FPS at 1080p High, showing that quality presets have a dramatic impact on performance.

Q: How does the combo perform at 4K Ultra compared to 1080p Ultra?

A: At 3840x2160 Ultra, the average FPS drops to 33, while at 1920x1080 Ultra it is 77. This represents a 57% reduction in frame rate, indicating a strong GPU bottleneck at higher resolutions.

Q: What is the combo's ranking among all tested combinations in Rust?

A: The combo ranks 784th out of 1717 tested combinations. This places it in the middle of the pack, suggesting that while the hardware is capable, there are many faster configurations available.

Q: How does the Ryzen 9 5950X compare to the Intel Core i5-14600K in average benchmark score?

A: The Ryzen 9 5950X has an average benchmark score of 49062, while the Intel Core i5-14600K scores 49166. The delta is -0.2%, meaning the 5950X is slightly slower but effectively within statistical noise.

Q: What is the GPU's memory bandwidth and size?

A: The NVIDIA GeForce RTX 5060 features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 448.0 GB/s. This is a key specification for understanding texture and geometry throughput in Rust.

Q: Does the RTX 5060 outperform the AMD Radeon RX 7700 XT in average GPU score?

A: The RTX 5060 has an average benchmark score of 30109, while the AMD Radeon RX 7700 XT scores 30097. The delta is 0%, meaning they are effectively identical in average performance.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a clear and predictable scaling curve across resolutions. At 1080p Low, the combo delivers 175.9 FPS. Moving to 1440p Low drops this to 117.2 FPS, and at 4K Low it falls further to 69.7 FPS. This represents a 60% reduction from 1080p to 4K at the Low preset. The pattern is consistent across all quality settings: at High, the drop is from 98.7 FPS at 1080p to 67.7 FPS at 1440p to 42.3 FPS at 4K; at Medium, from 115.7 to 81 to 49.7; and at Ultra, from 77 to 51.8 to 33.

The scaling behavior reveals that the GPU becomes the limiting factor at higher resolutions. The RTX 5060's 8 GB of VRAM and 448.0 GB/s bandwidth are sufficient for 1080p and 1440p, but at 4K, the pixel throughput demands exceed what the GPU can deliver, especially at higher quality presets. The fact that FPS drops by roughly half from 1080p to 4K at every preset indicates a GPU-bound scenario, where the CPU's 16 cores are not the bottleneck. Conversely, the relatively small performance gap between Low and Ultra at 1440p (117.2 vs 51.8 FPS) suggests that the game's engine places a heavy load on the GPU's shading and texture units, which are saturated by the higher quality settings.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo's rank of 784 out of 1717 tested combinations places it just below the median, at approximately the 54th percentile. This is a middling result for a CPU that sits at the 93rd percentile among all processors and a GPU at the 73rd percentile among all GPUs. The discrepancy between component-level and combo-level rankings suggests that while each part is individually strong, their combination does not yield top-tier performance in Rust. The data indicates that the RTX 5060, with an average benchmark score of 30109, is the weaker link; its nearest rivals include the AMD Radeon RX 7700 XT (30097, delta 0%) and the NVIDIA Tesla M60 (29969, delta 0.5%). The CPU, by contrast, is well-matched to its rivals, with the 5950X's 49062 average score being nearly identical to the Intel Core i5-14600K's 49166.

The implication for Rust is that the combo is balanced but not optimized for maximum frame rates. The 5950X has ample headroom, as evidenced by the 175.9 FPS at 1080p Low, but the GPU cannot sustain that performance at higher resolutions. This rank suggests that users seeking higher FPS in Rust would benefit more from a stronger GPU than a stronger CPU, as the current pairing leaves CPU performance underutilized in GPU-bound scenarios.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture using a 5 nm process, featuring 3840 shading units, 120 TMUs, and 48 ROPs. Its base clock is 2280 MHz with a boost clock of 2497 MHz, and the 8 GB of GDDR7 memory runs at an effective 28 Gbps, delivering 448.0 GB/s of bandwidth. The GPU's average benchmark score is 30109, placing it at the 73rd percentile among all GPUs. Its closest rivals are the AMD Radeon RX 7700 XT (30097, delta 0%), the AMD Radeon RX 570 (30158, delta -0.2%), the NVIDIA Tesla M60 (29969, delta 0.5%), and the NVIDIA GeForce RTX 5070 Mobile (29928, delta 0.6%).

In Rust, the GPU's role is most evident at higher resolutions and quality settings. At 4K Ultra, the combo manages only 33 FPS, which is a playable but not smooth experience. The 8 GB VRAM capacity is likely a constraint at this resolution, as Rust's large world and complex textures can exceed this limit, causing texture thrashing. The 128-bit memory bus, while paired with fast GDDR7, limits the memory bandwidth compared to wider-bus alternatives, which explains why the FPS drops are steeper at 4K. At 1080p, the GPU performs adequately, with 175.9 FPS at Low and 77 FPS at Ultra, indicating that the 5060 can handle the game well at mainstream resolutions. The data shows that for 1440p gaming, the combo delivers 67.7 FPS at High, which is borderline smooth, but the 51.8 FPS at Ultra suggests that users may need to dial back settings for a consistent experience. Overall, the RTX 5060 is the primary limiter in this pairing, particularly at 4K, where its VRAM and bandwidth constraints prevent the 5950X from reaching its full potential.