Rust

Rust is a demanding survival title that stresses both the CPU and the GPU. For the combination of an AMD Ryzen 7 3700X and an NVIDIA GeForce RTX 3060 Ti, the measured data from the benchmark database provides a clear picture of how this pairing scales across resolutions and settings. The results cover three resolutions at four quality levels, and they reveal a system that is playable at 1080p and 1440p but struggles to hold comfortable frame rates at 4K. This analysis breaks down the measured FPS, the role of each component, and how this combo ranks among every other tested combination in Rust.

FAQ

Q: What frame rates does the Ryzen 7 3700X + RTX 3060 Ti deliver at 1080p?

A: At 1920x1080, the average FPS is 156 on Low, 114 on Medium, 96 on High, and 73 on Ultra. The Medium preset also records a minimum of 97 and a maximum of 131 FPS.

Q: How does the performance scale to 1440p?

A: At 2560x1440, average FPS drops to 117 on Low, 78 on Medium (min 67, max 90), 66 on High, and 50 on Ultra.

Q: What are the 4K results for this combo?

A: At 3840x2160, the average frame rate measures 69 on Low, 46 on Medium (min 39, max 53), 39 on High, and 30 on Ultra.

Q: Where does this combo rank in Rust among all tested systems?

A: This pairing ranks 1897th out of 3723 tested combinations in Rust.

Q: How does the RTX 3060 Ti compare to its nearest GPU rivals?

A: The RTX 3060 Ti has an average benchmark score of 16129. The AMD Radeon RX 9060 is 0.7% higher, the Radeon Pro 5600M is 1.4% lower, the RX 5700 XT is 1.4% lower, and the Radeon R9 370X is 1.7% lower.

Q: How does the Ryzen 7 3700X compare to its nearest CPU rivals?

A: The CPU’s average benchmark score is 34260. A 00-point delta puts the AMD Ryzen AI 7 350 and the AMD EPYC 4244P each 0.1% higher, while the Intel Core i5-13450HX is -0.2% lower and the Intel Core Ultra 7 165H is 0.5% higher.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the core visual engine of this build, and its specifications directly shape the measured frame rates in Rust. The GPU is built on the Ampere architecture, with a GA104 chip, and offers 8 GB of GDDR6 memory on a 256-bit bus, delivering a bandwidth of 448.0 GB/s. The memory runs at 1750 MHz (14 Gbps effective), with a base clock of 1410 MHz and a boost clock of 1665 MHz. These characteristics are typical of a mid-high-range card, and the measured 2020 numbers for the RTX 3060 Ti place it at the 59th percentile of all GPUs, with an average benchmark score of 16129.

The GPU’s impact on Rust becomes obvious when looking at resolution scaling. From 1920x1080 High (96 FPS) to 3840x2160 High (39 FPS), performance falls by over 60%, which is the classic signature of a GPU-bound workload at elevated resolutions. That said, the 1080p results show that with the CPU not standing in the way, the 3060 Ti still has enough headroom to deliver 156 FPS on Low, and 114 FPS on Medium, where the frame-time range sits between 97 and 131 FPS. The biggest GPU stress appears at 4K Ultra, where the average frame rate collapses to 30 FPS. That point, the render load exceeds what the 8 GB frame buffer and 448.0 GB/s bandwidth can feed smoothly, and the measured combo becomes borderline for fluid play.

It is also useful to see that the GPU’s performance percentile (59) is lower than the Combo’s CPU percentile (84). This does not count as a defect; rather, it indicates that in most game scenes the GPU is the component that will limit the maximum output. Rust’s world is large and often includes many unoptimized entities, but the downward FPS slope as resolution scales shows the GPU’s memory bandwidth and shading logic are the first constraints to be saturated. The 1655 MHz boost clock is adequate, yet at 4K the raw geometry and pixel work will overwhelm a card that, although respectable, is not a top-tier performer.

Measured FPS Breakdown

The measured data gives a complete picture of the Ryzen 7 3700X + RTX 3060 Ti’s frame handling across three resolutions and the four standard quality settings. The following table lists average FPS, plus minimum and maximum values where recorded.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 1920x1080 | Low | 156 | — | — |

| 1920x1080 | Medium | 114 | 97 | 131 |

| 1920x1080 | High | 96 | — | — |

| 1920x1080 | Ultra | 73 | — | — |

| 2560x1440 | Low | 117 | — | — |

| 2560x1440 | Medium | 78 | 67 | 90 |

| 2560x1440 | High | 66 | — | — |

| 2560x1440 | Ultra | 50 | — | — |

| 3840x2160 | Low | 69 | — | — |

| 3840x2160 | Medium | 46 | 39 | 53 |

| 3840x2160 | High | 39 | — | — |

| 3840x2160 | Ultra | 30 | — | — |

At each resolution, the progression from Low to Ultra produces a consistent drop. The 1080p Low result of 156 FPS is the maximum achievable in the entire dataset, and already at 1080p Ultra (73 FPS) the GPU starts to waste effort on effects. Moving to 1440p, the pattern becomes regular: Medium drops to 78, High to 66, and Ultra to exactly 50. The 4K numbers tell the most cautionary story: 69 at Low, 46 at Medium, 39 at High, and 30 at Ultra. The delta between Low and Ultra at 4K is 39 FPS, and the Low-to-Ultra difference at 1080p is 83 frames. This shows the GPU handles the software load relatively well at ultra-low settings, one reason the combo can still produce an acceptable 1080p Ultra experience.

Where min/max data is available, the frame times suggest a stable run. At 1080p Medium, the range is from 97 to 131, a 34- FPS spread, which indicates occasional dips but no severe stutter. At 1440p Medium the spread narrows to 23, and at 4K Medium it comes down to 14. That trend suggests the experience becomes more consistent at higher resolutions, but at the cost of much lower absolute frame rates.

How This Combo Ranks

In a separate ranking of all 3723 combinations that have been tested for Rust, the Ryzen 7 3700X + RTX 3060 Ti lands at 1897th place. That rank puts it just slightly above the midpoint of the field, meaning precisely half of the tested systems deliver higher average frame rates and half deliver lower ones. With 1897, the combo sits in the middle of the pack—not a standout for competitive play, but far from a weak link. The system’s positioning is influenced more by the GPU than the CPU, because the CPU percentile (84) is dramatically higher than the GPU percentile (53), so the 3060 Ti is the part that holds the rank back.

A mid-field rank in Rust is expected for a combo where the GPU performs at the 59th percentile and the CPU at the 84th. Many other combinations with a stronger graphics card or a more efficient overall pairing will overtake it, particularly in 4K and Ultra settings. Conversely, the CPU’s high percentile helps at lower resolutions and in CPU-heavy player-count scenarios, but the FPS data again shows that the GPU’s rank dominates the overall score. The measured FPS results directly support this interpretation: the combo cannot raise its rank without a heavier GPU, because the CPU is already well above the middle in the hardware-wide distribution.

For builders targeting Rust, this rank provides a reference. The combination sits in the middle ground among the 3724 tested entries, indicating it will deliver smooth play at 1080p and 1440p while giving a moderate experience at 4K. If the goal is to sit near the top quarter of systems, a higher-tier graphics card would be the necessary change; if the goal is only for a full-day, the currently measured frame rates are adequate for any non-4K setting.

CPU Role

The AMD Ryzen 7 3700X is an 8-core, 16-thread processor based on the Zen 2 architecture (Matisse), built on TSMC’s 7 nm process. It has a base clock of 3.60 GHz and a boost clock of 4.40 GHz, with a 32 MB L3 cache. The CPU is part of the 3000 series, uses the AM4 socket, and supports DDR4 memory with a dual-channel configuration, providing a memory bandwidth of 51.2 GB/s. Its 65 W TDP and multiplier unlocked indicate a strong performance-per-watt profile, and its average benchmark score of 34260 places it at 84th percentile among all CPUs.

In Rust, the CPU’s job is to handle the game’s simulation, physics, and the logic related to structures and entities. The 8 Cores / 16 Threads means it can handle many background tasks without bottlenecking at lower resolution, which is exactly what the measured data shows: the highest frame rate occurs at 1080p Low (156 FPS), where the GPU is not a stressor. Although the 3060 Ti has enough room to exceed 100 FPS at 1440p on Low, the CPU still manages to feed it (117 FPS). The CPU also provides strong single-thread handling (Cinebench R15 single-core score of 204, PassMark single-thread 2656), which matters for Rust’s main thread, but the measured FPS drop from Low to Ultra at each resolution confirms that the burden transfers almost entirely to the GPU once quality settings increase.

Comparatively, the 3700X’s performance in the data is nearly identical to that of the Ryzen AI 7 350 (0.1% higher) and the EPYC 4244P (0.1% higher), and only marginally lower than the Intel Core Ultra 7 165H (0.5% higher). That means the CPU is not a limiting factor for this pairing; rather, the GPU becomes the decisive component as resolution edges to 4K. This is a practical combinination for players who run at 1080p or 1440p with a mix of medium to high settings, and the CPU should remain productive for several more years thanks to its 8-core layout and 4.40 GHz boost. Only when the resolution rises above 2560x1440 will the GPU become the clear factor, and then the CPU’s high percentile ensures its own performance not falling further behind.