Revolution Idle

Revolution Idle is not a typical twitch shooter, yet the benchmark data for this configuration still provides a clear hierarchy of performance. The Intel Core i5-14600K and NVIDIA GeForce RTX 5050 combo ranks at 1813 out of 2986 tested combinations. This placement in the 39th percentile indicates that while this pairing is far from the top of the charts, it is not at the bottom either; it sits in the lower-middle segment of the database. The data suggests this is a competent setup for the game, but one that will require careful settings management at higher resolutions to maintain smooth frame rates, as the measured results will show a significant drop-off in performance as pixel count increases.

The benchmark results for this specific combo reveal a system that is clearly more capable at 1080p than at 4K. The average frame rates at 1080p are all above 55 FPS, even on the most demanding preset. However, the jump to 4K presents a significant challenge, with even the Medium preset struggling to maintain a consistent 30 FPS. This points to a GPU-bound scenario at higher resolutions, where the RTX 5050’s memory bandwidth and compute power become the limiting factors. The following sections will break down the CPU and GPU contributions, analyze the scaling across resolutions, and provide specific settings recommendations based on the measured data.

How This Combo Ranks

The overall ranking for this combination in Revolution Idle is a modest 1813th place out of 2986 tested configurations. This places the system in the 39th percentile of all tested combos, meaning that roughly 61% of the tested setups performed better in this specific game. This is not a top-tier result, but it is also not a poor one; it indicates a mid-pack performer that can handle the game adequately at lower settings or resolutions.

Looking at the individual components, the CPU’s general benchmark percentile is much higher than the combo’s in-game rank. The Intel Core i5-14600K sits in the 90th percentile for all CPUs, based on its average benchmark score of 48618. This high CPU standing does not translate directly to a top-tier in-game ranking because Revolution Idle’s performance at higher resolutions is heavily dependent on the GPU. The RTX 5050, in contrast, is in the 66th percentile for all GPUs, with an average benchmark score of 21035. The GPU’s lower relative standing compared to the CPU is the primary reason the combo does not rank higher; the graphics card is the bottleneck in this pairing for this game.

The data suggests that the combo’s rank is a direct reflection of the GPU's capabilities. While the CPU is a high-performing part, the RTX 5050’s performance ceiling prevents the system from achieving frame rates that would place it in the upper echelons of the benchmark database. The gap between the CPU's high percentile and the GPU's mid-range percentile is the defining characteristic of this configuration. The results clearly show that to improve this combo's rank, a more powerful GPU would be necessary, as the CPU has ample headroom to support it.

CPU Role

The Intel Core i5-14600K is a 14-core processor with 20 threads, based on the Raptor Lake architecture. It has a base clock of 3.50 GHz and a boost clock of 5.30 GHz. This high boost clock is crucial for single-threaded performance, which can be relevant for game logic and physics in any title, including idle games that may have complex background calculations. The CPU’s 24 MB of shared L3 cache also helps keep frequently used data close to the cores, reducing latency.

In the context of Revolution Idle’s benchmark results, the CPU appears to be more than sufficient. At 1080p with Low settings, the combo achieves an average of 118 FPS, which is the highest frame rate in the entire dataset. This high score suggests that the CPU is capable of feeding the GPU with enough data to reach high frame rates when the graphical load is low. The CPU’s strong multi-core score of 24491 in Cinebench R23 also suggests it can handle any background tasks the game might run without impacting performance.

The CPU's performance relative to its nearest rivals in the database is extremely tight. It scores nearly identically to the Intel Xeon Gold 5318H, with a delta of -0.2%, and is only 0.3% ahead of the AMD EPYC 4345P. This indicates that the i5-14600K is a solid, average performer in its class. However, the in-game frame rates do not scale perfectly with these CPU benchmark scores. The fact that the FPS at 1080p drops from 118 FPS on Low to 85 FPS on High suggests that even at 1080p, the GPU is starting to become a factor, as the CPU should have minimal difficulty handling the increased draw calls from a higher settings preset.

GPU Role

The NVIDIA GeForce RTX 5050 is the primary arbiter of performance for this combo in Revolution Idle. It comes with 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 320.0 GB/s. The GPU has a base clock of 2317 MHz and a boost clock of 2572 MHz. The amount of VRAM and the memory bandwidth are critical factors at higher resolutions, where the GPU must handle larger textures and more geometry.

The benchmark data clearly shows the GPU is the limiting component. At 4K, the performance is poor, with the Ultra preset averaging only 18 FPS and High preset at 28 FPS. Even dropping to Low settings only raises the average to 39 FPS. This drastic drop from the 1080p results indicates that the RTX 5050’s 8 GB VRAM and 320.0 GB/s bandwidth are insufficient to feed the rendering pipeline at 4K resolution without significant bottlenecks. The GPU’s compute capabilities, rated at 13.17 TFLOPS for FP32, are also likely being maxed out at this resolution.

The GPU's standing among its rivals further contextualizes its performance. It is nearly identical to the AMD Radeon RX Vega M GL, with a delta of -0.6%, and only 1.6% ahead of the AMD Radeon RX 5600 XT. This places the RTX 5050 in a specific performance tier. The data shows that this tier is capable of providing excellent frame rates at 1080p (e.g., 89 FPS on Medium) but struggles to maintain playable frame rates at 4K. The GPU's 66th percentile ranking is a more accurate predictor of its in-game performance than the CPU's 90th percentile.

FAQ

Q: What is the highest average frame rate this combo can achieve in Revolution Idle?

A: The highest average frame rate is 118 FPS, which is achieved at 1920x1080 resolution with the Low settings preset.

Q: Can this system handle 4K resolution in Revolution Idle?

A: The data indicates that 4K is not a viable option for smooth gameplay. The highest average frame rate at 3840x2160 is 39 FPS on Low settings, with the Medium preset averaging only 29 FPS and dropping to a minimum of 25 FPS.

Q: How does the CPU’s performance compare to its closest rivals?

A: The Intel Core i5-14600K is statistically tied with its nearest competitors. It is 0.3% faster than the AMD EPYC 4345P and 0.7% faster than the Intel Core Ultra 5 245HX. It is slightly slower than the Intel Xeon Gold 5318H and Intel Core Ultra 5 245, by -0.2% and -0.8% respectively.

Q: What is the performance difference between the Low and Ultra presets at 1440p?

A: At 2560x1440, the Low preset averages 75 FPS, while the Ultra preset averages 34 FPS. This represents a significant performance cost for the higher visual fidelity, with the Ultra preset delivering less than half the frame rate of the Low preset.

Q: Is the GPU or CPU the main bottleneck for this combo in Revolution Idle?

A: The benchmark results strongly indicate the GPU is the limiting factor, especially at higher resolutions. The CPU ranks in the 90th percentile and delivers high frame rates at 1080p Low, but the GPU’s 66th percentile ranking and the severe frame rate drop at 4K point to it as the performance ceiling.

Q: What is the minimum FPS recorded for this combo, and under what conditions?

A: The minimum FPS recorded is 25 FPS, which was measured at 3840x2160 resolution with the Medium settings preset.

Resolution Scaling

The performance scaling across resolutions is the most telling aspect of this data. Moving from 1920x1080 to 2560x1440 on the High preset, the average frame rate drops from 85 FPS to 54 FPS. This is a substantial decrease of 31 FPS, representing a 36% reduction in performance. This scaling pattern continues when moving to 3840x2160, where the High preset averages only 28 FPS, a further drop of 26 FPS from the 1440p result.

This steep decline in frame rates as resolution increases is a classic sign of a GPU bottleneck. The CPU is capable of maintaining high frame rates at 1080p, as evidenced by the 118 FPS result on Low settings. However, as the resolution increases, the GPU must render more pixels, and its workload grows exponentially. The RTX 5050’s 320.0 GB/s memory bandwidth and 8 GB VRAM become saturated, preventing it from keeping up with the demands of the higher resolutions.

The scaling from 1080p to 4K is particularly brutal. On the Medium preset, the frame rate drops from 89 FPS at 1080p to 29 FPS at 4K. This is a 67% reduction in performance. The difference between the 1080p and 1440p results shows a similar pattern. This indicates that the GPU is not just slightly underpowered for 4K; it is fundamentally outclassed. The data shows that 1080p is the sweet spot for this combo, where the CPU can push high frame rates, and the GPU can keep up. 1440p is playable but requires a settings compromise, and 4K should be avoided for a smooth experience.

Settings Recommendations

Based on the measured FPS, the optimal settings depend heavily on the user's target resolution and desired frame rate. For a smooth 60 FPS experience, 1080p is the only viable resolution. At 1920x1080, the High settings preset achieves an average of 85 FPS, and the Medium preset achieves 89 FPS. Both of these are excellent options, with Medium offering a slight frame rate advantage with minimal visual compromise. The Low preset is the only one to break 100 FPS, hitting 118 FPS, which is ideal for high-refresh-rate monitors.

For users with a 1440p monitor, a 60 FPS target is not consistently achievable. The Low preset averages 75 FPS, which provides a good experience, but the Medium preset drops to 56 FPS and the High preset to 54 FPS. These are playable but will feel less fluid than the 1080p results. The Ultra preset at 1440p averages 34 FPS and is not recommended for any fast-paced action, though it may be acceptable for a game like Revolution Idle if visual fidelity is the primary concern.

4K resolution is not recommended for this combo. The highest average frame rate is 39 FPS on the Low preset, which is below the threshold for smooth gameplay. The Medium preset averages 29 FPS, and the High preset averages 28 FPS. These frame rates will result in noticeable stuttering and a poor overall experience. The Ultra preset at 4K is effectively unplayable at 18 FPS. The data clearly shows that the RTX 5050 is not suited for 4K gaming in this title, and users should stick to 1080p or 1440p for the best experience.

Measured FPS Breakdown

The following is a detailed breakdown of the measured average frame rates for every tested configuration.

1920x1080:

• Ultra: The average FPS is 55 FPS. This is the most demanding preset at this resolution.
• High: The average FPS is 85 FPS. This represents a significant improvement over Ultra.
• Medium: The average FPS is 89 FPS, with a minimum of 76 FPS and a maximum of 103 FPS. This is the most consistent performer at 1080p.
• Low: The average FPS is 118 FPS. This is the highest score recorded for any configuration in the dataset.

2560x1440:

• Ultra: The average FPS is 34 FPS. This is below the threshold for smooth gameplay.
• High: The average FPS is 54 FPS. This is a playable frame rate, though not ideal.
• Medium: The average FPS is 56 FPS, with a minimum of 48 FPS and a maximum of 65 FPS.
• Low: The average FPS is 75 FPS. This is the best option for 1440p gaming with this combo.

3840x2160:

• Ultra: The average FPS is 18 FPS. This is not a playable experience.
• High: The average FPS is 28 FPS. This is also not recommended for smooth gameplay.
• Medium: The average FPS is 29 FPS, with a minimum of 25 FPS and a maximum of 34 FPS. This shows the GPU is struggling significantly at this resolution.
• Low: The average FPS is 39 FPS. This is the only configuration at 4K that approaches playability, but it still falls short of a stable 60 FPS target.