Revolution Idle

The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 5070 presents a fascinating split in Revolution Idle. At 1080p, the CPU keeps pace, but the moment resolution climbs, the GPU takes over entirely. The data shows a clear transition: the combo ranks 478th out of 1774 tested configurations, placing it in the top 27% of all pairings, which is a solid result for this mid-range processor with a high-end graphics card.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals a classic GPU-bound scenario at higher resolutions. At High settings, the average frame rate falls from 123.6 FPS at 1920x1080 to 88.7 FPS at 2560x1440, then plunges to 47.1 FPS at 3840x2160. That is a 62% reduction in performance from 1080p to 4K, indicating that the RTX 5070 is the limiting factor at the highest resolution.

The pattern holds across all settings. At Medium, the drop is from 123 FPS at 1080p to 94.5 FPS at 1440p and 50.3 FPS at 4K. Even at Low, where the CPU has the least work, the numbers fall from 141.4 FPS at 1080p to 120.9 FPS at 1440p and 63.1 FPS at 4K. The fact that the 4K numbers are so much lower than the 1440p results, regardless of preset, confirms that the GPU's pixel-pushing capability is the bottleneck.

However, the 1440p results are more encouraging. The gap between 1080p and 1440p is moderate, suggesting the CPU still has headroom. For instance, at High settings, 1440p delivers 88.7 FPS, which is 72% of the 1080p score. This indicates that the i5-10400F is not choking the system until you approach 4K. The scaling from 1440p to 4K is the harsh cliff, with frame rates nearly halving, which is typical for a GPU with 12 GB of GDDR7 memory and 672.0 GB/s of bandwidth being saturated by the higher pixel count.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Revolution Idle?

A: The data shows 2560x1440 as the sweet spot. At High settings, it produces 88.7 FPS, which is smooth, while 4K High drops to 47.1 FPS, which is below the 60 FPS threshold most players prefer.

Q: Does the Intel Core i5-10400F bottleneck the RTX 5070?

A: Only at 1080p and Low settings does the CPU show its limits, with 141.4 FPS being the ceiling. At higher resolutions and settings, the GPU is the limiting factor, as evidenced by the large FPS drops when moving to 4K.

Q: How does this combo compare to other tested configurations?

A: It ranks 478th out of 1774 combos, which puts it in the upper quartile. This is a strong result, considering the CPU is a 10th-gen part, and it outperforms a majority of systems tested.

Q: Should I use the Ultra preset?

A: No. Ultra settings yield only 92.6 FPS at 1080p, 56 FPS at 1440p, and 29.9 FPS at 4K. The visual quality increase does not justify the performance loss compared to High settings.

Q: What is the performance difference between Low and High settings at 1440p?

A: Low settings produce 120.9 FPS, while High settings produce 88.7 FPS. The 32.2 FPS difference is significant, but High is still playable, making it the better choice for visual fidelity.

Q: Is the RTX 5070's 12 GB memory sufficient for 4K in this game?

A: The measured FPS suggests the memory is not the issue; the raw compute power is. At 4K Ultra, the combo only manages 29.9 FPS, indicating the GPU's 30.87 TFLOPS of FP32 performance is stretched thin at that resolution.

CPU Role

The Intel Core i5-10400F is a 6-core, 12-thread processor from the Comet Lake generation, with a base clock of 2.90 GHz and a boost clock of 4.30 GHz. Its benchmark scores provide context for its role. In Cinebench R23, it scores 10297 multi-core and 1453 single-core, placing it in the 73rd percentile of all CPUs. This is a capable mid-range part, but it is not a high-end performer.

In Revolution Idle, the CPU's influence is most visible at 1080p. At Low settings, the combo hits 141.4 FPS, but this is barely higher than the 123.6 FPS seen at High settings. This small delta suggests the processor is approaching its limit around the 140 FPS mark. The 3DMark 16-thread score of 4748 and the multi-thread score of 12115 in Passmark indicate that the CPU can handle the game's background calculations, but it cannot push frame rates much higher than 140 FPS in this title.

The CPU's 12 MB of shared L3 cache and dual-channel DDR4 memory support are adequate, but the lack of a higher boost clock means it relies on the GPU for most of the heavy lifting at higher resolutions. The data supports this: at 4K, the difference between Low and High settings is 63.1 FPS vs 47.1 FPS, a 16 FPS gap that is entirely due to GPU workload, not CPU capability.

Settings Recommendations

The optimal choice is the High preset. It delivers the best balance of visual quality and performance. At 1080p, High provides 123.6 FPS, which is nearly identical to Medium's 123 FPS, but with better graphics. At 1440p, High offers 88.7 FPS, which is still comfortably above 60 FPS, and at 4K, it manages 47.1 FPS, which is playable for an idle game.

Ultra is not worth it. The performance cost is massive: 92.6 FPS at 1080p, 56 FPS at 1440p, and 29.9 FPS at 4K. The drop from High to Ultra at 1080p is 31 FPS, which is a 25% reduction for a setting that typically adds marginal visual improvements. For a game like Revolution Idle, where the action is not fast-paced, a stable 60 FPS at 4K is more valuable than Ultra settings.

Medium is a safe fallback if you want to ensure a higher frame rate at 4K, but the gain over High is only 3.2 FPS (50.3 vs 47.1). Low settings should be avoided unless you are chasing maximum frame rates, as the visual downgrade is significant.

How This Combo Ranks

The combination of the Intel Core i5-10400F and NVIDIA GeForce RTX 5070 holds the 478th position out of 1774 tested combos in Revolution Idle. This places it in the 73rd percentile of all systems, which is impressive given the CPU's age. The RTX 5070, which sits in the 83rd percentile of all GPUs, is doing most of the work, but the CPU is not dragging the system down.

The CPU's nearest rivals include the AMD EPYC 7552, which scores 14115 (0.4% higher), and the AMD Ryzen 3 7320C, which scores 14277 (0.8% lower). These are all within a 1.2% margin, meaning the i5-10400F is perfectly average for its performance class. The GPU's nearest rivals show a similar story: the AMD Radeon Pro 5300 is 0.2% higher, and the NVIDIA GeForce RTX 3090 is 0.6% higher. This consistency means the combo's ranking is not due to a bottleneck but rather a balanced pairing.

The data indicates this combo is a solid mid-tier setup. It beats the majority of systems tested, and the performance is predictable. The only weakness is the CPU's inability to push past 140 FPS at 1080p, but for most players, the 4K and 1440p results are what matter.

Measured FPS Breakdown

At 1920x1080, the RTX 5070 and i5-10400F produce strong results across all presets:

• Low: 141.4 FPS
• Medium: 123 FPS
• High: 123.6 FPS
• Ultra: 92.6 FPS

The jump from Low to Medium is 18.4 FPS, but the jump from High to Ultra is 31 FPS, showing diminishing returns.

At 2560x1440, the scaling is more logical:

• Low: 120.9 FPS
• Medium: 94.5 FPS
• High: 88.7 FPS
• Ultra: 56 FPS

These numbers are all playable, with even Ultra managing above 50 FPS. The gap between Low and High is 32.2 FPS, which is more acceptable.

At 3840x2160, the GPU struggles:

• Low: 63.1 FPS
• Medium: 50.3 FPS
• High: 47.1 FPS
• Ultra: 29.9 FPS

Only Low settings break the 60 FPS barrier at 4K. The drop from Medium to High is just 3.2 FPS, but the drop from High to Ultra is 17.2 FPS, confirming that Ultra is a performance killer. Overall, the data shows this combo is best used at 1440p with High settings, where it delivers 88.7 FPS, or at 4K with Low settings, where it hits 63.1 FPS.