Revolution Idle

Revolution Idle

AVERAGE FPS
57
playable

This combination offers playable performance with an average of 57 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 18 28 29 39
1440p QHD 34 54 56 75
1080p Full HD 55 85 89 118

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 39
3840x2160 Medium 29
3840x2160 High 28
3840x2160 Ultra 18
2560x1440 Low 75
2560x1440 Medium 56
2560x1440 High 54
2560x1440 Ultra 34
1920x1080 Low 118
1920x1080 Medium 89
1920x1080 High 85
1920x1080 Ultra 55

Revolution Idle with AMD Ryzen 9 7900X + NVIDIA GeForce RTX 5050, In-Depth Analysis

The AMD Ryzen 9 7900X paired with the NVIDIA GeForce RTX 5050 produces a spread of results in Revolution Idle, ranging from a smooth 118 FPS average at 1080p Low to an unplayable 18 FPS average at 4K Ultra. The data reveals a configuration that is heavily influenced by resolution and settings, with the GPU emerging as the primary bottleneck at higher loads. This analysis walks through the measured frames per second, the scaling behavior, and the specific roles of the CPU and GPU in shaping the experience.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings presets, indicating that the rendering workload scales dramatically with pixel count. At Low settings, the average frame rate falls from 118 FPS at 1920x1080 to 75 FPS at 2560x1440, a reduction of 43 FPS. Pushing further to 3840x2160 yields an average of 39 FPS, meaning the transition from 1440p to 4K costs another 36 FPS. This represents a total decline of 79 FPS from the lowest to the highest resolution tested at Low settings, a 67% drop.

The pattern is similar but slightly less severe in relative terms at High settings. The average at 1080p High is 85 FPS, which falls to 54 FPS at 1440p and then to 28 FPS at 4K. The gap between 1080p and 4K is 57 FPS, or 67% of the 1080p value. Medium settings show an analogous trajectory: 89 FPS at 1080p, 56 FPS at 1440p, and 29 FPS at 4K. Ultra settings are the most demanding, starting at 55 FPS at 1080p, dropping to 34 FPS at 1440p, and collapsing to 18 FPS at 4K.

The data suggests that the limiting component shifts as resolution increases. At 1080p, the frame rates are high enough that the CPU’s 12 cores and 24 threads are likely able to feed the GPU adequately. However, the sharp decline at 4K, where even Low settings only manage 39 FPS, points to the GPU’s 8 GB of VRAM and 128-bit memory interface being saturated. The RTX 5050’s bandwidth of 320.0 GB/s appears insufficient for the pixel throughput required at 3840x2160. The scaling is not linear; the jump from 1440p to 4K is proportionally larger than from 1080p to 1440p, which is typical when a GPU reaches its fill-rate limits.

FAQ

*Q: What is the highest average FPS recorded for this combo in Revolution Idle?*

A: The highest average FPS is 118, achieved at 1920x1080 resolution with Low settings.

Q: How does the RTX 5050 perform at 4K Ultra settings?

A: The average FPS at 3840x2160 with Ultra settings is 18 FPS, which is below the threshold for smooth gameplay and indicates a hard limit for this configuration.

Q: Is there a significant difference between Medium and High settings at 1080p?

A: The difference is minimal. At 1920x1080, Medium settings produce an average of 89 FPS, while High settings produce 85 FPS, a margin of only 4 FPS.

Q: What is the frame time consistency like at 1440p Medium?

A: The data shows a minimum FPS of 48 and a maximum of 65, with an average of 56. This suggests some variance, but the average is stable enough for most gameplay.

Q: Does the CPU bottleneck the GPU at any tested resolution?

A: At 1080p Low, the average of 118 FPS is the highest recorded, suggesting the CPU is not limiting at that point. However, at 4K, the GPU is clearly the limiting factor, as no settings preset exceeds 39 FPS.

Q: How does the average FPS at 1440p High compare to 1080p Ultra?

A: They are very close. 1440p High averages 54 FPS, while 1080p Ultra averages 55 FPS, a difference of just 1 FPS.

GPU Role

The NVIDIA GeForce RTX 5050 is the decisive component in Revolution Idle’s higher resolutions. Its memory configuration consists of 8 GB of GDDR6 on a 128-bit bus, providing a bandwidth of 320.0 GB/s. The core operates at a base clock of 2317 MHz and a boost clock of 2572 MHz. These specifications are modest for 4K rendering, and the measured results confirm this.

At 3840x2160, the GPU cannot maintain playable frame rates. Even at Low settings, the average is 39 FPS, and at Ultra it drops to 18 FPS. The 8 GB VRAM capacity is likely a factor, as higher resolutions and settings require more memory for textures and buffers. The 128-bit bus width, despite the relatively high memory clock of 2500 MHz (20 Gbps effective), limits the data throughput. This is reflected in the 4K results, where the card’s fill rate and memory bandwidth are overwhelmed.

In contrast, at 1920x1080, the RTX 5050 shows its capability. The average FPS at Low settings is 118, and at High it is 85. The boost clock of 2572 MHz helps maintain performance at lower resolutions where the pixel workload is smaller. The GPU’s 2560 shading units are sufficient for 1080p, allowing the card to operate efficiently. The data indicates that the RTX 5050 is best suited for 1080p and acceptable for 1440p at medium presets, but it is not a 4K-capable part for this title.

Measured FPS Breakdown

At 1920x1080, the full range of settings is playable. Low settings yield an average of 118 FPS, which is the highest in the entire dataset. Medium settings maintain an average of 89 FPS, with a minimum of 76 and a maximum of 103 FPS. High settings follow closely at 85 FPS. Ultra settings are the most demanding at this resolution, producing an average of 55 FPS, which is still smooth but represents a significant drop from the other presets.

Moving to 2560x1440, the performance degrades. Low settings average 75 FPS, which is acceptable. Medium settings average 56 FPS, with a range of 48 to 65 FPS. High settings average 54 FPS, nearly identical to Medium. Ultra settings fall to an average of 34 FPS, which is borderline for smooth gameplay. The data shows that 1440p is viable for Low through High, but Ultra pushes the GPU too hard.

At 3840x2160, the results are poor across the board. Low settings average 39 FPS, which is stuttery. Medium settings average 29 FPS, with a minimum of 25 and a maximum of 34 FPS. High settings average 28 FPS. Ultra settings are the worst, with an average of 18 FPS. None of these averages reach the 60 FPS target, and even the 30 FPS threshold is only barely met at Low settings. The 4K data confirms that this combo is not suited for this resolution in Revolution Idle.

How This Combo Ranks

The combination of the AMD Ryzen 9 7900X and the NVIDIA GeForce RTX 5050 ranks 1813 out of 2986 tested combos in Revolution Idle. This places it in the lower half of configurations, which is consistent with the measured FPS data. The rank of 1813 indicates that most other combos tested perform better in this specific game.

Given the GPU’s 66th percentile ranking among all GPUs and the CPU’s 91st percentile among all CPUs, the bottleneck is clearly the GPU. The data suggests that the Ryzen 9 7900X is capable of driving higher frame rates, but the RTX 5050 holds the system back, particularly at higher resolutions. The combo’s rank of 1813 out of 2986 implies that many other GPU pairings achieve better results, likely due to more powerful graphics cards.

The CPU’s nearest rivals, such as the AMD EPYC 7313P and the Intel Core i7-14700F, show similar average benchmark scores with deltas of 0.2% and -0.6% respectively. This indicates that the CPU is not a differentiator in this ranking. The GPU’s nearest rivals, such as the AMD Radeon RX 5600 XT and the NVIDIA RTX A4000 Mobile, have similar average scores with deltas of 1.6% and -1.6%. This proximity suggests that the RTX 5050’s performance is typical for its class, and the low combo rank is more about the game’s demands than a defective part.

Settings Recommendations

The measured data provides clear guidance for optimal settings. At 1920x1080, the best experience balances frame rate and visual quality. High settings at 85 FPS is a strong choice, offering a smooth experience without the steep penalty of Ultra. Medium settings at 89 FPS are nearly identical and could be preferred for a slight performance buffer. Low settings at 118 FPS are for those prioritizing maximum responsiveness, but the visual trade-off is significant. Ultra at 55 FPS is playable, but the 30 FPS drop from High makes it less desirable.

At 2560x1440, the recommendation is to stick with Medium or High settings. Medium averages 56 FPS, which is playable, while High averages 54 FPS. The difference is negligible, so users can choose based on visual preference. Low at 75 FPS is also viable for a smoother experience. Ultra at 34 FPS is not recommended, as it dips below the 60 FPS threshold and may feel sluggish.

At 3840x2160, no settings preset provides a good experience. Low at 39 FPS is the only option that approaches playability, but it is still below 60 FPS. Medium at 29 FPS and High at 28 FPS are too slow, and Ultra at 18 FPS is unplayable. The data suggests avoiding 4K entirely for this combo in Revolution Idle, or accepting Low settings with reduced graphical fidelity.

CPU Role

The AMD Ryzen 9 7900X is a high-end processor with 12 cores and 24 threads, based on the Zen 4 architecture. It has a base clock of 4.70 GHz and a boost clock of 5.60 GHz. This CPU is overkill for Revolution Idle, which is an idle game that typically does not stress multi-core performance. The benchmark results show strong scores, such as a Cinebench R23 multi-core score of 29300 and a single-core score of 2016.5, indicating it is not the limiting factor in this system.

The CPU’s role in the measured FPS is primarily to avoid bottlenecking the GPU at lower resolutions. At 1080p Low, the average of 118 FPS demonstrates that the CPU can handle the frame delivery. The 12 cores and 24 threads ensure that any background tasks or game logic do not interfere with rendering. The high boost clock of 5.60 GHz is beneficial for single-threaded tasks, which are common in game engines.

However, the CPU’s performance is irrelevant at 4K, where the GPU is saturated. The data shows that the FPS drop from 1440p to 4K is severe, regardless of CPU capability. The Ryzen 9 7900X’s 64 MB of shared L3 cache and dual-channel DDR5 memory support (83.2 GB/s bandwidth) are more than sufficient for this game. In summary, the CPU provides a solid foundation, but the RTX 5050 limits the overall experience, especially at higher resolutions.

Hardware Specifications

AMD Ryzen 9 7900X

Cores / Threads 12 / 24
Base Clock 4700 MHz
Boost Clock 5600 MHz
TDP 170W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 5050

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2572 MHz MHz
TDP 130 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 9 7900X + NVIDIA GeForce RTX 5050 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 39.0
3840x2160 Medium 29.0
3840x2160 High 28.0
3840x2160 Ultra 18.0
2560x1440 Low 75.0
2560x1440 Medium 56.0
2560x1440 High 54.0
2560x1440 Ultra 34.0
1920x1080 Low 118.0
1920x1080 Medium 89.0
1920x1080 High 85.0
1920x1080 Ultra 55.0

Revolution Idle with Ryzen 9 7900X + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 5050 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with Ryzen 9 7900X + RTX 5050

Explore FPS benchmarks for other games using this same hardware combination.