Revolution Idle

Revolution Idle

AVERAGE FPS
94
good

This combination provides smooth gameplay with an average of 94 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 47 49 65
1440p QHD 57 89 94 124
1080p Full HD 91 141 148 196

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 65
3840x2160 Medium 49
3840x2160 High 47
3840x2160 Ultra 30
2560x1440 Low 124
2560x1440 Medium 94
2560x1440 High 89
2560x1440 Ultra 57
1920x1080 Low 196
1920x1080 Medium 148
1920x1080 High 141
1920x1080 Ultra 91

Revolution Idle with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070, In-Depth Analysis

Revolution Idle is not a typical twitch shooter, but the measured frame-rate data for the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 combo still reveals a clear performance hierarchy across resolutions. At 1920x1080, the system is heavily CPU-bound, delivering high triple-digit frame rates that scale dramatically with settings. Moving to 2560x1440, the GPU begins to take on more responsibility, but the frame rates remain exceptionally smooth. At 3840x2160, the RTX 5070 becomes the definitive limiting factor, with average frame rates dropping to levels that are playable but far from the high-refresh territory seen at lower resolutions. The data indicates a classic resolution-scaling curve: the gap between Low and Ultra settings widens significantly as resolution increases, confirming that the GPU’s workload grows faster than the CPU’s at higher pixel counts.

Resolution Scaling

The scaling behavior from 1080p to 4K is stark and reveals the bottleneck shift. At 1920x1080 with Low settings, the combo achieves an average of 196 FPS, which drops to 91 FPS at Ultra—a reduction of 105 FPS, or roughly 54%. This massive drop at 1080p suggests the CPU is not the primary constraint; rather, the GPU’s rendering load at Ultra settings is what cuts performance nearly in half. At 2560x1440, the same Low-to-Ultra transition sees averages fall from 124 FPS to 57 FPS, a 67 FPS difference. The trend continues at 3840x2160, where Low hits 65 FPS and Ultra plummets to 30 FPS, a 35 FPS gap. The percentage drop from Low to Ultra is consistent—around 54% at 1080p, 54% at 1440p, and 54% at 4K—indicating that the GPU’s shader and pixel workload scales linearly with settings regardless of resolution.

However, the absolute frame rates tell a different story about the limiting component. At 1080p Low, 196 FPS is remarkably high, and even at 1440p Low, 124 FPS suggests the CPU can feed the GPU adequately. But at 4K Low, the average falls to 65 FPS, which is below the 1440p Ultra result of 57 FPS only by a small margin. This indicates that at 4K, even with Low settings, the GPU’s fill rate and memory bandwidth become the bottleneck. The RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are sufficient for 1080p and 1440p, but at 3840x2160, the pixel throughput demand (201.0 GPixel/s) is taxed heavily. The data shows that the CPU’s role diminishes as resolution climbs; the Ryzen 5 7400F’s 6 cores and 12 threads are more than enough to keep up at 4K, where the GPU’s 80 ROPs and 30.87 TFLOPS FP32 performance are the limiting factors.

The Medium preset provides the only data with min and max FPS values, offering insight into frame pacing. At 1080p Medium, the average is 148 FPS with a min of 126 and max of 170, showing a 44 FPS spread. At 1440p Medium, the average drops to 94 FPS with a min of 80 and max of 108, a 28 FPS spread. At 4K Medium, the average is 49 FPS with a min of 42 and max of 56, a 14 FPS spread. This tightening of the frame-time variance as resolution increases further confirms the GPU-bound nature at higher pixel counts; the CPU’s ability to maintain consistent frame delivery is less strained, while the GPU’s consistent rendering times lead to narrower FPS ranges. The overall scaling suggests that for high-refresh monitors (144Hz or above), 1080p is the sweet spot, while 1440p remains viable for 60-120Hz displays, and 4K is only for 60Hz or lower targets.

Settings Recommendations

The measured rows provide a clear hierarchy for optimal settings based on target frame rates. At 1920x1080, the Low preset delivers an average of 196 FPS, which is ideal for competitive or high-refresh gameplay, but the Medium preset at 148 FPS still offers a substantial frame rate with better visual quality. The High preset at 141 FPS is nearly identical to Medium, offering minimal visual gains for a 7 FPS loss. Ultra at 91 FPS is the only preset that drops below 100 FPS, making it less desirable for 144Hz displays. The data suggests that Medium or High at 1080p provides the best balance, as both stay above 140 FPS, ensuring smooth gameplay without sacrificing significant visual fidelity.

For 2560x1440, the recommendations shift. Low at 124 FPS is optimal for 120Hz monitors, but Medium at 94 FPS and High at 89 FPS are both suitable for 60-90Hz displays. Ultra at 57 FPS is borderline, falling below the 60 FPS threshold that many users consider smooth. The data indicates that Medium is the best experience at 1440p, as it offers 94 FPS with a min of 80 FPS, ensuring no major drops below 60 FPS. High is also viable at 89 FPS, but the 5 FPS difference from Medium is negligible, making Medium the preferred choice for a high refresh rate experience without the visual penalty of Low.

At 3840x2160, the situation is more constrained. Low at 65 FPS is the only preset that exceeds 60 FPS, making it the default recommendation for 4K gaming. Medium at 49 FPS and High at 47 FPS are nearly identical, both below 60 FPS, and Ultra at 30 FPS is only suitable for cinematic experiences or screenshots. The data shows that for 4K, Low is the only playable preset for smooth gameplay, and even then, the 65 FPS average suggests users may need to accept reduced visual quality to maintain frame rates. The RTX 5070’s 12 GB VRAM is not the limiting factor here, as the Low preset at 4K still uses the same memory pool, but the GPU’s compute and rasterization throughput is insufficient for higher presets.

GPU Role

The NVIDIA GeForce RTX 5070’s specifications directly correlate with the measured FPS results. The GPU features a base clock of 2325 MHz and a boost clock of 2512 MHz, with 6144 shading units and 80 ROPs. The 30.87 TFLOPS FP32 performance is the key metric for rasterization, and the data shows that at 4K Ultra, the GPU’s throughput is maxed out, resulting in a 30 FPS average. The 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s bandwidth, which is sufficient for all presets at 1080p and 1440p, but at 4K, the higher memory pressure from larger textures and higher pixel counts may contribute to the performance drop, though the benchmark scores do not isolate this. The GPU’s PassMark G3D score of 29137 places it in the 82nd percentile of all GPUs, indicating strong overall performance, but the measured FPS in Revolution Idle shows that the game’s specific workload is demanding at 4K.

The GPU’s nearest rivals in the benchmark database include the AMD Radeon Pro 580 with an average score of 40318 (0.1% delta) and the AMD Radeon Pro WX 7100 at 40063 (0.8% delta), but these are professional workstation cards, not gaming GPUs. The RTX 5070’s 82nd percentile ranking suggests it outperforms the majority of GPUs, yet the 4K Ultra results demonstrate that even a high-end GPU struggles with maxed settings in this game. The RTX 5070’s 48 RT cores and 192 tensor cores are not directly relevant to Revolution Idle’s rendering, as the game likely does not use ray tracing or DLSS based on the measured FPS data, but the raw shader performance is what drives the results. The GPU’s 250W TDP and PCIe 5.0 x16 interface are standard for this class, but the data shows that the GPU’s thermal and power headroom is not the bottleneck; rather, the absolute compute capacity is.

How This Combo Ranks

The AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070 combo ranks 514th out of 2986 tested combos in Revolution Idle, placing it in the top 17.2% of all configurations. This ranking is respectable but not elite, indicating that while the individual components are strong, the combination does not dominate the game’s performance leaderboard. The CPU’s percentile rank is 83rd among all CPUs, and the GPU’s is 82nd, so both are near the top of their respective categories. However, the combo rank of 514 suggests that other pairings, likely with higher-end CPUs or GPUs, achieve better frame rates. The data implies that the RTX 5070 is the limiting factor in this combo, as the CPU’s 83rd percentile is higher than the GPU’s 82nd percentile, and the frame rates at 4K Ultra (30 FPS) are far from the top-tier results.

The combo’s ranking is influenced by the game’s nature as an idle game, which may not be heavily threaded or GPU-intensive compared to AAA titles. The Ryzen 5 7400F’s 6 cores and 12 threads are sufficient for the game’s logic, but the GPU’s 30.87 TFLOPS is overkill for most idle games, leading to a situation where the CPU’s single-thread performance (Cinebench R23 single-core score of 3072) is more critical than the GPU’s raw power. The combo’s rank of 514 out of 2986 means it is outperformed by 2472 other combos, which could include configurations with faster CPUs like the Intel Core i5-14600T (which has a similar average benchmark score of 32707) or GPUs with higher memory bandwidth. The data suggests that for Revolution Idle, a more balanced combo with a slightly slower GPU but faster CPU might achieve a higher rank, as the game appears to be CPU-bound at lower resolutions, where the combo already delivers 196 FPS at 1080p Low.

CPU Role

The AMD Ryzen 5 7400F’s specifications and benchmark scores provide context for its role in the measured FPS. The CPU has 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 4.70 GHz, based on the Zen 4 architecture on a 5nm process. Its Cinebench R23 multi-core score of 21765 and single-core score of 3072 indicate strong performance, and the PassMark single-thread score of 3689 places it in the 83rd percentile of all CPUs. In Revolution Idle, the CPU’s role is most evident at 1080p, where the combo achieves 196 FPS on Low settings, suggesting that the CPU can drive frame rates well above 144Hz. The 12 threads and 32 MB of L3 cache are likely sufficient for the game’s simulation logic, which is typical for idle games that rely more on background calculations than complex 3D rendering.

The CPU’s nearest rivals include the Intel Core i5-14600T with an average benchmark score of 32707 (0.1% delta) and the AMD Ryzen 7 PRO 6850H at 32812 (-0.2% delta), indicating that the 7400F’s performance is tightly clustered with these chips. In the game, the CPU’s impact on FPS is most pronounced at 1080p, where the frame rates are high enough that any CPU bottleneck would be visible. The data shows that at 1080p Ultra, the FPS drops to 91, but this is likely due to the GPU’s settings, not the CPU, as the CPU’s single-thread performance is ample. The CPU’s 65W TDP and dual-channel DDR5 memory support (83.2 GB/s bandwidth) are not directly measurable in the FPS data, but the architecture’s efficiency likely contributes to consistent frame pacing, as seen in the Medium preset’s min FPS of 126 at 1080p.

Measured FPS Breakdown

At 1920x1080, the measured FPS across settings is as follows: Low averages 196 FPS, Medium averages 148 FPS with a min of 126 and max of 170, High averages 141 FPS, and Ultra averages 91 FPS. The transition from Low to Medium results in a 48 FPS drop, while Medium to High is only 7 FPS, and High to Ultra is 50 FPS. This indicates that the Ultra preset imposes a significant performance penalty, likely due to high-resolution textures or advanced effects that stress the GPU’s 12 GB VRAM. The 1080p data shows that the combo is capable of exceeding 140 FPS on most presets, making it suitable for high-refresh gaming.

At 2560x1440, the averages are 124 FPS on Low, 94 FPS on Medium (min 80, max 108), 89 FPS on High, and 57 FPS on Ultra. The drop from Low to Medium is 30 FPS, Medium to High is 5 FPS, and High to Ultra is 32 FPS. The 4K results are the most telling: Low averages 65 FPS, Medium averages 49 FPS (min 42, max 56), High averages 47 FPS, and Ultra averages 30 FPS. The difference between Medium and High at 4K is only 2 FPS, suggesting that the GPU is saturated and the settings have diminishing returns. The Ultra preset at 4K is nearly unplayable at 30 FPS, while Low remains the only preset above 60 FPS. The data clearly shows that the RTX 5070’s performance ceiling is reached at 4K Ultra, and users targeting 4K should stick to Low settings for a smooth experience. The Medium preset’s min FPS of 42 at 4K indicates potential stutters, while the Low preset’s 65 FPS average provides a more stable baseline.

Hardware Specifications

AMD Ryzen 5 7400F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 5070

VRAM 12 GB GDDR7
Base Clock —
Boost Clock 2512 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5070 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 65.0
3840x2160 Medium 49.0
3840x2160 High 47.0
3840x2160 Ultra 30.0
2560x1440 Low 124.0
2560x1440 Medium 94.0
2560x1440 High 89.0
2560x1440 Ultra 57.0
1920x1080 Low 196.0
1920x1080 Medium 148.0
1920x1080 High 141.0
1920x1080 Ultra 91.0

Revolution Idle with Ryzen 5 7400F + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 5070 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with Ryzen 5 7400F + RTX 5070

Explore FPS benchmarks for other games using this same hardware combination.