Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
60
good

This combination provides smooth gameplay with an average of 60 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 25 33 45 58
1440p QHD 40 52 63 84
1080p Full HD 49 70 85 113

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 58
3840x2160 Medium 45
3840x2160 High 33
3840x2160 Ultra 25
2560x1440 Low 84
2560x1440 Medium 63
2560x1440 High 52
2560x1440 Ultra 40
1920x1080 Low 113
1920x1080 Medium 85
1920x1080 High 70
1920x1080 Ultra 49

Red Dead Redemption 2 with Intel Core i5-13400F + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 3060 Ti occupies the 898th position out of 1,687 tested combinations for Red Dead Redemption 2. This places the pairing in the middle of the database's distribution, meaning it is neither a top-tier enthusiast setup nor a low-end entry point. The percentile data for the individual components reinforces this positioning: the CPU sits at the 82nd percentile among all processors, while the GPU rests at the 69th percentile among all graphics cards. The gap between these two figures suggests that the graphics card is the more limiting factor in this pairing, a conclusion that becomes more evident when examining the resolution-specific performance data.

How This Combo Ranks

The combo's rank of 898 out of 1,687 tested configurations places it just above the median for Red Dead Redemption 2. This mid-pack standing is consistent with the hardware's individual benchmark scores: the CPU's average benchmark score is 25,236, and the GPU's average is 25,120, both of which are very close to the scores of their nearest rivals. The CPU's nearest competitor, the Intel Core i7-13620H, scores 25,201, a negligible delta of 0.1% ahead, while the AMD Ryzen 5 5600X3D is 0.5% ahead at 25,365. On the GPU side, the AMD Radeon RX 6700M is 0.2% behind at 25,180, and the AMD Radeon RX 6600 is 0.5% behind at 25,235. These tight deltas indicate that the combo's ranking is not defined by a large performance gap but rather by the specific demands of this game's engine.

The data shows that the combo's overall position is driven more by the GPU's 69th percentile standing than the CPU's higher 82nd percentile. In Red Dead Redemption 2, which is known for its heavy reliance on GPU shading and memory bandwidth, the RTX 3060 Ti's mid-range standing directly translates to the measured frame rates. The CPU, with its strong multi-core and single-core scores, is not the bottleneck at most settings, but the GPU's limits become apparent at higher resolutions and quality presets. This rank serves as a practical benchmark: buyers with this pairing should expect playable but not exceptional performance in this title.

GPU Role

The NVIDIA GeForce RTX 3060 Ti features 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. The card's base clock is 1410 MHz, boosting to 1665 MHz, with memory clocked at 1750 MHz (14 Gbps effective). These specifications place it in the upper-mid range of the GeForce 30-series, and its average benchmark score of 25,120 confirms its position just below the top-performing cards in the database. The GPU's 80 ROPs and 152 TMUs are directly relevant to Red Dead Redemption 2's rendering workload, which utilizes heavy texture filtering and pixel output.

In the measured data, the GPU's role is most evident at 4K resolution. At 3840x2160 with Low settings, the combo achieves 57.7 FPS, but this drops to 45 FPS at Medium and further to 32.6 FPS at High, eventually falling to 24.7 FPS at Ultra. These numbers illustrate a clear pattern: the 8 GB VRAM and memory bandwidth become strained as texture quality and draw distances increase. The 448.0 GB/s bandwidth is sufficient for 1080p and 1440p, but at 4K, the card's compute throughput of 16.20 TFLOPS and pixel rate of 133.2 GPixel/s are insufficient to maintain high frame rates at higher presets. The GPU's performance ceiling is the primary reason the combo ranks in the 53rd percentile of all tested combinations.

CPU Role

The Intel Core i5-13400F is a 10-core, 16-thread processor based on the Raptor Lake architecture, with a base clock of 2.50 GHz and a boost clock of 4.60 GHz. It features 80 KB of L1 cache per core, 1.25 MB of L2 per core, and 20 MB of shared L3 cache. Its benchmark results show strong multi-threaded performance: a Cinebench R23 multi-core score of 21,279 and a Geekbench multi-core score of 10,971. Single-thread performance is also solid, with a Cinebench R23 single-core score of 3,004 and a Geekbench single-core score of 2,301. The CPU's 82nd percentile ranking among all processors means it is comfortably above average.

In Red Dead Redemption 2, the CPU's role is to feed the GPU with draw calls and manage game logic. The data shows that this is not a significant bottleneck at lower resolutions. At 1080p with Low settings, the combo reaches 113.2 FPS, which is the highest measured frame rate across all configurations. This indicates that the CPU can handle the game's single-threaded demands effectively, as the 13400F's boost clock of 4.60 GHz provides ample headroom. However, at 1080p with Ultra settings, the frame rate drops to 49.4 FPS, which is a 56% reduction from Low. This drop is not due to CPU limitations but rather the GPU's inability to process the increased shading and texture work at that preset. The CPU's 10 cores and 16 threads are sufficient for this title, as the game does not scale beyond a few threads for its core simulation.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo's performance across resolutions and settings. At 1920x1080, the lowest resolution tested, the combo delivers 113.2 FPS at Low settings, 84.6 FPS at Medium, 70 FPS at High, and 49.4 FPS at Ultra. These numbers show a gradual decline as quality increases, with the largest drop occurring between High and Ultra, a 29.4% reduction. The 1080p results are playable at all settings, but Ultra is the only preset that dips below 60 FPS.

Moving to 2560x1440, the frame rates decrease predictably. Low settings yield 83.6 FPS, Medium 62.8 FPS, High 51.5 FPS, and Ultra 40.3 FPS. The drop from Low to Ultra is 51.8%, which is more pronounced than at 1080p, indicating a growing GPU limitation. At this resolution, only Low and Medium maintain frame rates above 60 FPS, while High and Ultra fall below the 60 FPS threshold. The 1440p results suggest that the RTX 3060 Ti's 8 GB VRAM is adequate for Medium settings but struggles with the increased memory requirements of High and Ultra presets.

At 3840x2160, the performance becomes marginal. Low settings produce 57.7 FPS, which is just below 60 FPS, Medium drops to 45 FPS, High to 32.6 FPS, and Ultra to 24.7 FPS. The 4K data shows a clear ceiling: the GPU cannot maintain playable frame rates at any preset above Low. The gap between Low and Ultra at 4K is 57.2%, which is the largest percentage drop across all resolutions. These measurements confirm that the combo is best suited for 1080p and 1440p gaming, with 4K reserved for Low or Medium settings at best.

Resolution Scaling

The resolution scaling analysis reveals the limiting component in this pairing. From 1080p to 1440p at High settings, the frame rate drops from 70 FPS to 51.5 FPS, a 26.4% reduction. From 1440p to 4K at High, the frame rate falls from 51.5 FPS to 32.6 FPS, a 36.7% reduction. These drops are larger than the pixel count increase would suggest if the CPU were the bottleneck, indicating that the GPU is the primary limiter. The scaling pattern is consistent across all settings: at Low, 1080p to 1440p drops 26.2% (113.2 to 83.6), and 1440p to 4K drops 31% (83.6 to 57.7). At Ultra, the drops are 18.4% (49.4 to 40.3) and 38.7% (40.3 to 24.7), respectively.

The data shows that the GPU's memory bandwidth and compute resources are the limiting factors as resolution increases. The CPU's performance, as measured by its multi-threaded scores, does not degrade with resolution, so the frame rate drops are entirely attributable to the GPU. The RTX 3060 Ti's 448.0 GB/s bandwidth is the key constraint at 4K, where the game requires more texture data to be streamed per frame. At 1080p, the CPU's 4.60 GHz boost clock can keep up with the GPU's output, but at 4K, the GPU's pixel rate of 133.2 GPixel/s is insufficient to fill the screen at high quality settings. This scaling behavior confirms that the combo is GPU-bound in Red Dead Redemption 2 at all resolutions above 1080p.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend on the target resolution and frame rate preference. For 1080p, the Medium preset at 84.6 FPS offers the best balance of visual quality and smoothness, as it remains well above 60 FPS while providing a substantial improvement over Low. The High preset at 70 FPS is also viable, but the 17.2% drop from Medium to High may not justify the visual gains for all users. The Ultra preset at 49.4 FPS is not recommended for competitive play but could be used for single-player exploration where frame rate is less critical.

At 1440p, the Medium preset at 62.8 FPS is the only setting that consistently stays above 60 FPS, making it the recommended choice for a fluid experience. The High preset at 51.5 FPS is playable but may show stutter in scenes with heavy action. The Low preset at 83.6 FPS provides the smoothest experience but sacrifices visual fidelity. For 4K, the Low preset at 57.7 FPS is the only setting that approaches 60 FPS, while Medium at 45 FPS and High at 32.6 FPS are too low for a responsive experience. The data suggests that users targeting 4K should prioritize the Low preset or consider lowering the resolution to 1440p for better quality per frame. The Ultra preset is not recommended at any resolution above 1080p, as the frame rates drop below 50 FPS, which is insufficient for a smooth experience in this game.

Hardware Specifications

Intel Core i5-13400F

Cores / Threads 10 / 16
Base Clock 2500 MHz
Boost Clock 4600 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-13400F + NVIDIA GeForce RTX 3060 Ti in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 57.7
3840x2160 Medium 45.0
3840x2160 High 32.6
3840x2160 Ultra 24.7
2560x1440 Low 83.6
2560x1440 Medium 62.8
2560x1440 High 51.5
2560x1440 Ultra 40.3
1920x1080 Low 113.2
1920x1080 Medium 84.6
1920x1080 High 70.0
1920x1080 Ultra 49.4

Red Dead Redemption 2 with ii5-13400F + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 3060 Ti + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with ii5-13400F + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.