Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
106
good

This combination provides smooth gameplay with an average of 106 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 62 74 99
1440p QHD 67 94 112 150
1080p Full HD 90 126 151 201

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 99
3840x2160 Medium 74
3840x2160 High 62
3840x2160 Ultra 45
2560x1440 Low 150
2560x1440 Medium 112
2560x1440 High 94
2560x1440 Ultra 67
1920x1080 Low 201
1920x1080 Medium 151
1920x1080 High 126
1920x1080 Ultra 90

Red Dead Redemption 2 with AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 5080, In-Depth Analysis

# Red Dead Redemption 2 with AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 5080

The combination of AMD's Ryzen 9 9900X3D and NVIDIA's GeForce RTX 5080 delivers a thoroughly capable Red Dead Redemption 2 experience across all three tested resolutions, though the data reveals a clear pattern: this is a GPU-bound pairing at higher resolutions, with the processor's substantial 128 MB of L3 cache and 12 Zen 5 cores providing ample headroom even at 1080p. The measured frames per second (FPS) figures show that the RTX 5080's performance ceiling is the primary constraint from 1440p upward, while the CPU's strong single-threaded and multi-threaded benchmark scores ensure that even the most demanding scenes in Rockstar's open world won't leave you CPU-limited.

Resolution Scaling

The FPS progression from 1080p to 4K tells a textbook story of GPU-bound scaling. At High settings, the average frame rate drops from 126 FPS at 1920x1080 to 94 FPS at 2560x1440, then further to 62 FPS at 3840x2160. That represents a 26% reduction moving from 1080p to 1440p, and a 51% reduction from 1080p to 4K. The pattern is nearly identical at Medium settings: 151 FPS at 1080p, 112 FPS at 1440p, and 74 FPS at 4K — a 26% and 51% drop respectively. Low settings show the same scaling shape but with higher absolute numbers: 201 FPS at 1080p, 150 FPS at 1440p, and 99 FPS at 4K.

The consistency of these percentage drops across settings presets strongly indicates that the RTX 5080 is the limiting component at every resolution above 1080p. If the CPU were the bottleneck, you would expect to see the 1080p-to-1440p gap narrow as settings increase, because higher GPU load would give the processor more breathing room. Instead, the scaling remains uniform, which is the signature of a graphics card operating at its performance envelope. At 1080p Low, the 201 FPS figure is likely approaching the point where CPU overhead could start to matter, but the Ryzen 9 9900X3D's benchmark results — including a 3DMark single-thread score of 1269 and a Cinebench R23 single-core score of 6739 — suggest that even this frame rate is comfortably within the processor's capabilities.

The Ultra preset reveals the steepest cost of resolution. At 1080p Ultra, the average is 90 FPS; at 1440p Ultra, it falls to 67 FPS; and at 4K Ultra, it collapses to 45 FPS. The 4K Ultra result is particularly telling — it sits below the 60 FPS threshold that many players consider the minimum for smooth gameplay, and it represents a 50% reduction from the 1080p Ultra figure. The scaling from Ultra at 1080p to 1440p is a 26% drop, matching the other presets, but the 1440p-to-4K transition on Ultra is a 33% reduction, slightly steeper than the 30% observed on High and Medium. This suggests that the most demanding preset pushes the RTX 5080's memory bandwidth and shading resources particularly hard at 4K, where the 960.0 GB/s bandwidth and 56.28 TFLOPS FP32 throughput are strained by the combination of high resolution and maximum visual fidelity.

FAQ

Q: Can this system run Red Dead Redemption 2 at 4K with playable frame rates?

A: Yes, but with caveats. At 4K High settings, the average FPS is 62, which is playable. At 4K Medium, it rises to 74 FPS, and at 4K Low, it reaches 99 FPS. However, 4K Ultra drops to 45 FPS, which falls below the 60 FPS threshold for smooth gameplay.

Q: How does the Ryzen 9 9900X3D's cache affect performance in this game?

A: The processor's 128 MB of L3 cache is a significant asset for open-world games like Red Dead Redemption 2, which routinely stream large amounts of world data. The CPU's strong benchmark scores — including a Cinebench R23 multi-core score of 47737 and a PassMark multi-thread score of 56154 — indicate it has ample headroom to feed the RTX 5080 without becoming a bottleneck, even at 1080p Low where frame rates reach 201 FPS.

Q: What is the best settings preset for a balance of visual quality and performance?

A: For most players, High settings at 1440p (94 FPS) or 4K (62 FPS) provide the best compromise. At 1080p, High delivers 126 FPS, which is smooth on high-refresh displays. Medium settings offer a meaningful FPS boost — 151 FPS at 1080p, 112 FPS at 1440p, and 74 FPS at 4K — at the cost of some visual fidelity.

Q: Is the RTX 5080's 16 GB of GDDR7 memory sufficient for this game?

A: The 16 GB capacity is more than adequate for Red Dead Redemption 2's demands. The 256-bit memory bus and 960.0 GB/s bandwidth provide substantial throughput, which is reflected in the 4K performance figures. The card's PassMark G3D score of 36565 places it in the 87th percentile of all GPUs, confirming it has the raw resources to handle this title's large textures and draw distances.

Q: How does this CPU+GPU combo rank against other hardware combinations for this game?

A: The combination ranks 182nd out of 2902 tested combos, placing it in the top 7% of all configurations. This ranking reflects the strong synergy between the Ryzen 9 9900X3D's multi-threaded capability and the RTX 5080's rasterization performance.

Q: Will the system maintain 60+ FPS at 1440p with all settings maxed?

A: At 1440p Ultra, the average FPS is 67, which exceeds 60 FPS. However, the minimum FPS for Ultra settings is not recorded in the data, so there may be occasional dips below 60 FPS in the most demanding scenes. If you want a guaranteed 60+ FPS floor, High settings at 1440p (94 FPS average) provide more margin.

Settings Recommendations

The measured data supports a clear hierarchy of settings presets, with each step up in quality costing a predictable amount of performance. At 1080p, every preset delivers playable frame rates, but the choice depends on your display's refresh rate. If you own a 144 Hz monitor, High settings at 126 FPS or even Medium at 151 FPS will take full advantage of the panel's capability. Low settings at 201 FPS are only useful for competitive play or if you want to maximize frame pacing, but the visual sacrifice is substantial for a game as visually rich as Red Dead Redemption 2.

At 1440p, High settings at 94 FPS are the sweet spot for most players. This preset balances the game's detailed environments with smooth motion, and the 94 FPS average provides enough headroom above 60 FPS to accommodate brief dips without noticeable stuttering. Medium settings at 112 FPS are the better choice if you prioritize frame rate above all else, while Ultra at 67 FPS is viable for players who insist on maximum visual quality and can tolerate occasional drops below the 60 FPS threshold. Low at 150 FPS is overkill for most 1440p displays and sacrifices too much visual fidelity.

At 4K, the recommendation is more nuanced. High settings at 62 FPS is the highest quality preset that maintains an average above 60 FPS, making it the default recommendation for 4K displays. Medium at 74 FPS provides a more comfortable margin above 60 FPS and is the safer choice if you want to avoid any perception of slowdown. Ultra at 45 FPS is playable on consoles but feels sluggish on PC, especially in a game with as much horse-riding and combat as this one. Low at 99 FPS is a viable option for players who want the highest possible frame rate at 4K, but the visual downgrade is severe.

The data suggests that the RTX 5080 is best utilized at 1440p High or 4K High, where it delivers a strong balance of visual quality and performance. The jump from Medium to High costs roughly 16-19% of the frame rate at every resolution (from 151 to 126 FPS at 1080p, 112 to 94 FPS at 1440p, and 74 to 62 FPS at 4K), which is a reasonable price for the improved lighting, shadows, and texture filtering that High typically provides. The jump from High to Ultra is more punishing, costing 29-33% of the frame rate at every resolution (from 126 to 90 FPS at 1080p, 94 to 67 FPS at 1440p, and 62 to 45 FPS at 4K), making Ultra a poor value proposition unless you have a G-SYNC display and can tolerate frame rates in the 40-70 range.

Measured FPS Breakdown

At 1920x1080, the full range of settings presets delivers performance that spans from comfortably playable to extremely high. Low settings produce an average of 201 FPS, which is the highest measured figure in the entire dataset and indicates that the RTX 5080 is nowhere near its limit at this resolution. Medium settings yield 151 FPS average, with a minimum of 128 FPS and a maximum of 173 FPS — the only preset in the dataset with recorded min/max values, showing a 30 FPS variance between the slowest and fastest frames. High settings drop to 126 FPS average, which is still well above the 100 FPS mark. Ultra settings bring the average down to 90 FPS, which is the first preset at 1080p to fall below the 100 FPS threshold.

At 2560x1440, the performance profile shifts downward by a consistent margin. Low settings average 150 FPS, which is a 25% reduction from the 1080p Low figure but still exceptionally high. Medium settings average 112 FPS, with a minimum of 95 FPS and a maximum of 129 FPS — again the only preset with recorded min/max values at this resolution, showing a 34 FPS variance. High settings average 94 FPS, which is just above the 90 FPS mark and provides a solid experience for 144 Hz displays that can't quite hit their full refresh rate. Ultra settings average 67 FPS, which is above the 60 FPS threshold but leaves little margin for demanding scenes.

At 3840x2160, the data reveals the RTX 5080's true limits. Low settings average 99 FPS, which is a 51% reduction from the 1080p Low figure and demonstrates the significant cost of rendering four times the pixels. Medium settings average 74 FPS, with a minimum of 63 FPS and a maximum of 85 FPS — the variance of 22 FPS is the tightest of any resolution, suggesting that the game is more consistent at 4K Medium because the GPU is more uniformly loaded. High settings average 62 FPS, which is barely above the 60 FPS threshold and represents the minimum viable preset for a smooth 4K experience. Ultra settings average 45 FPS, which is the only measured preset across all resolutions that falls below 60 FPS, making it unsuitable for players who demand a locked 60 FPS experience.

The min/max data available for Medium settings at each resolution provides insight into frame pacing. At 1080p Medium, the range is 128-173 FPS, a spread of 45 FPS. At 1440p Medium, the range is 95-129 FPS, a spread of 34 FPS. At 4K Medium, the range is 63-85 FPS, a spread of 22 FPS. This narrowing variance at higher resolutions indicates that the GPU is becoming the consistent bottleneck, which paradoxically produces more stable frame times even as the average FPS decreases.

GPU Role

The NVIDIA GeForce RTX 5080 is the dominant component in this configuration, and the measured FPS data reflects its capabilities and limitations. The card's 16 GB of GDDR7 memory on a 256-bit bus provides 960.0 GB/s of bandwidth, which is sufficient for Red Dead Redemption 2's large textures and streaming world. The memory clock of 1875 MHz (30 Gbps effective) is among the fastest available, and the card's 56.28 TFLOPS of FP32 compute power is a strong indicator of its rasterization performance in this title.

The RTX 5080's benchmark results place it in the 87th percentile of all GPUs, with an average benchmark score of 56083. Its nearest rivals include the AMD Radeon 8060S (0.6% higher score), the AMD Radeon RX 6750 GRE 12 GB (0.7% higher), and the AMD Radeon RX 9070 GRE (2.2% higher), while the AMD Radeon Pro W5700X trails by 2.3%. These narrow margins suggest that the RTX 5080 is positioned in a competitive segment, but in Red Dead Redemption 2 specifically, the measured FPS numbers show it performing strongly, with 4K High at 62 FPS being a particularly notable result for a card in this class.

The GPU's clock speeds — 2295 MHz base and 2617 MHz boost — are relatively high, and the card's power envelope of 360 W TDP with a suggested 750 W PSU indicates that it has substantial thermal and power headroom. The 84 RT cores and 336 tensor cores are present for ray tracing and DLSS features, though the measured FPS data in this dataset does not include ray tracing workloads. The card's PassMark G3D score of 36565 and 3DMark Steel Nomad DX12 score of 8637 provide additional context for its overall capability, with the latter being a modern DirectX 12 benchmark that correlates well with the game's rendering requirements.

The fact that the RTX 5080's performance scales so consistently across resolutions — with the 1080p-to-4K drop being nearly identical at every settings preset — confirms that the GPU is the limiting factor in this configuration. The CPU has more than enough headroom to feed the graphics card, as evidenced by the 1080p Low result of 201 FPS, which is a frame rate that would expose CPU bottlenecks in less capable processors. The 16 GB VRAM capacity is not a constraint in this game, as the 4K Medium result with its recorded minimum of 63 FPS demonstrates that the card can maintain playable performance without running out of memory.

CPU Role

The AMD Ryzen 9 9900X3D plays a supporting role in this configuration, but it is a well-chosen one. The processor's 12 cores and 24 threads, based on the Zen 5 architecture (Granite Ridge codename), provide substantial multi-threaded capability that is reflected in its benchmark scores. The Cinebench R23 multi-core score of 47737 and Geekbench multi-core score of 22884 place it in the 91st percentile of all CPUs, with an average benchmark score of 54762. Its nearest rivals include the Intel Core Ultra 5 245KF (0.6% higher score), Intel Core Ultra 5 245K (1.3% lower), Intel Xeon 6505P (2% lower), and Intel Core i7-14700F (2.1% lower).

The processor's defining feature is its 128 MB of L3 cache, which is split across the dual CCDs (each with 70.6 mm² die size) and is a significant advantage for open-world games like Red Dead Redemption 2. The game's streaming world and numerous NPCs benefit from the large cache, which reduces the need to access system memory (DDR5, dual-channel, 89.6 GB/s bandwidth) and lowers latency. The base clock of 4.40 GHz and boost clock of 5.50 GHz are competitive figures, and the single-threaded performance — evidenced by a Cinebench R23 single-core score of 6739 and a 3DMark single-thread score of 1269 — ensures that the game's main thread is well served.

In the context of this game's measured FPS, the CPU's role is best understood by what it doesn't do: it doesn't bottleneck the RTX 5080. The 1080p Low result of 201 FPS is the clearest evidence, as this is a frame rate that would be limited by CPU overhead in many systems. The fact that the average FPS at 1080p Low is more than double the 4K Ultra figure (201 vs. 45 FPS) indicates that the processor can push far more frames than the GPU can render at higher resolutions. The 3DMark 16-thread score of 12490 and max-thread score of 13795 show that the CPU's multi-threaded performance scales well with the game's workload, which is important for background simulation, AI, and physics calculations that Red Dead Redemption 2 runs alongside rendering.

The processor's 120 W TDP and 4 nm process node (TSMC) make it a power-efficient choice for a high-end gaming system, and its support for DDR5 memory with ECC capability adds flexibility. The Ryzen 9 9900X3D's 91st percentile ranking places it above the majority of CPUs, and its benchmark scores suggest that it will remain relevant for years to come. However, for this specific game, the data indicates that the CPU is not the limiting factor at any resolution or settings preset — the RTX 5080 is. The processor's job is to ensure that frame rates never dip due to CPU stalls, and the measured FPS figures, particularly the 1080p results, confirm that it performs this role admirably.

Hardware Specifications

AMD Ryzen 9 9900X3D

Cores / Threads 12 / 24
Base Clock 4400 MHz
Boost Clock 5500 MHz
TDP 120W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 5080

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2617 MHz MHz
TDP 360 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 5080 in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 99.0
3840x2160 Medium 74.0
3840x2160 High 62.0
3840x2160 Ultra 45.0
2560x1440 Low 150.0
2560x1440 Medium 112.0
2560x1440 High 94.0
2560x1440 Ultra 67.0
1920x1080 Low 201.0
1920x1080 Medium 151.0
1920x1080 High 126.0
1920x1080 Ultra 90.0

Red Dead Redemption 2 with Ryzen 9 9900X3D + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 5080 + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with Ryzen 9 9900X3D + RTX 5080

Explore FPS benchmarks for other games using this same hardware combination.