Red Dead Redemption 2

The AMD Ryzen 5 7600 and Intel Arc B580 combination delivers a playable but demanding experience in Red Dead Redemption 2, with performance scaling that clearly identifies the GPU as the primary constraint. The measured frame rates across resolutions and settings reveal a component pairing that is well-balanced for 1080p and 1440p gaming, while 4K remains largely out of reach at higher quality presets.

Resolution Scaling

The frame rate progression from 1080p to 4K demonstrates a steep performance cliff typical of GPU-bound scenarios. At 1080p with High settings, the combo produces 54.7 FPS, which drops to 38.3 FPS at 1440p—a reduction of 16.4 FPS or roughly 30%—and then falls further to 28.2 FPS at 4K. This pattern of diminishing returns as resolution increases is a textbook indicator that the Intel Arc B580’s rendering throughput, rather than the Ryzen 5 7600’s compute capabilities, is the limiting factor.

The scaling becomes even more pronounced when examining the Low settings preset. The 1080p Low result of 90.8 FPS drops to 64.3 FPS at 1440p (a 26.5 FPS loss) and then to 43.5 FPS at 4K (a further 20.8 FPS loss). The fact that even at Low settings the 4K frame rate falls below 45 FPS confirms that the GPU cannot keep pace with the pixel count at this resolution, regardless of how much the CPU is relieved of graphical work.

Interestingly, the delta between 1440p and 4K at Low settings (20.8 FPS) is smaller than the delta between 1080p and 1440p (26.5 FPS). This suggests that while the B580 struggles with 4K, the jump from 1080p to 1440p is where the most significant performance penalty occurs. The data indicates that users targeting smooth gameplay should treat 1440p as the practical ceiling for this combination, with 1080p being the resolution where the hardware can fully stretch its legs.

GPU Role

The Intel Arc B580’s specifications directly explain the observed scaling behavior. With 12 GB of GDDR6 memory on a 192-bit bus delivering 456.0 GB/s of bandwidth, the card has ample capacity for Red Dead Redemption 2’s large open-world textures, but the bandwidth becomes a bottleneck at higher resolutions where memory traffic increases substantially. The 2670 MHz base and boost clock—identical values—indicate a fixed operating point that does not dynamically adjust, which means the GPU’s performance ceiling is consistent across all tested scenarios.

The 2560 shading units and 80 ROPs produce a pixel rate of 213.6 GPixel/s and a texture rate of 427.2 GTexel/s. These figures translate into the observed frame rates: at 4K Ultra, the combo manages only 20.3 FPS, which aligns with the GPU being overwhelmed by the combination of high pixel count and demanding settings. The FP32 throughput of 13.67 TFLOPS places the B580 in a mid-range tier, and the benchmark results confirm this positioning—the card sits at the 66th percentile among all GPUs, with an average benchmark score of 23021.

The GPU’s nearest rivals in the benchmark database include the NVIDIA GeForce RTX 4060, which scores 23181 (0.7% higher), and the AMD Radeon 760M at 22999 (0.1% lower). This tight clustering indicates that the B580 is competitive with mainstream offerings, but the Red Dead Redemption 2 results show that this translates to 4K being a stretch goal rather than a realistic target. At 1080p Medium, the combo achieves 69.7 FPS, which is solid for a game of this scope, but the 20.3 FPS at 4K Ultra is a clear signal that the GPU’s 12 GB frame buffer and 192-bit bus are not sufficient for maxed-out 4K play.

How This Combo Ranks

Among the 1687 tested combinations in the database, this pairing of the AMD Ryzen 5 7600 and Intel Arc B580 ranks 1338th for Red Dead Redemption 2. That places it in the bottom 21% of all tested combos, which is a sobering statistic given the individual component performance. The CPU alone sits at the 83rd percentile among all processors, while the GPU is at the 66th percentile—both are respectable on their own, but the combination falls short of what the hardware’s individual scores might suggest.

The rank disparity can be attributed to the game’s demanding nature. The Ryzen 5 7600, with its 6 cores and 12 threads, has a strong average benchmark score of 26617, putting it within 0.2% of the AMD Ryzen 7 5800X3D (26574) and 0.3% of the Intel Core i9-11900K (26546). This CPU is clearly not the weak link. The GPU, however, while competitive with the RTX 4060 in synthetic benchmarks, appears to lose ground in this specific title. The measured FPS data shows that even at 1080p Low, the combo cannot breach the 100 FPS mark, suggesting that the B580’s driver optimization or architectural efficiency in this game leaves performance on the table.

The 1338th rank out of 1687 combos means there are 349 combinations that perform worse, but it also means the vast majority of tested systems deliver higher frame rates in this game. Users of this combo should temper expectations: it is a capable 1080p and 1440p setup, but it is not positioned to compete with higher-tier configurations in Red Dead Redemption 2.

FAQ

Q: What is the best settings preset for 1080p gaming with this combo?

A: The data shows that Medium settings at 1920x1080 produce 69.7 FPS, while High settings yield 54.7 FPS and Ultra drops to 41.2 FPS. Medium is the only preset that comfortably exceeds 60 FPS at 1080p, making it the optimal choice for smooth gameplay.

Q: Can this combo handle 4K resolution at any settings?

A: At 3840x2160, the best result is 43.5 FPS on Low settings. Medium produces 31.0 FPS, High 28.2 FPS, and Ultra 20.3 FPS. None of these reach 60 FPS, so 4K is only viable if the user accepts sub-45 FPS performance on the lowest preset.

Q: How does the Ryzen 5 7600 compare to its nearest CPU rivals?

A: The Ryzen 5 7600’s average benchmark score of 26617 is 0.2% higher than the AMD Ryzen 7 5800X3D (26574) and 0.3% higher than the Intel Core i9-11900K (26546). It trails the Intel Core i9-12900HK by 0.2% (26672). These deltas are within noise, indicating parity among these processors.

Q: Is the Intel Arc B580 a bottleneck at 1440p?

A: The data indicates yes. At 2560x1440, the combo achieves 64.3 FPS on Low, 47.6 FPS on Medium, 38.3 FPS on High, and 32.6 FPS on Ultra. Only the Low preset exceeds 60 FPS, showing that the GPU limits performance at this resolution for anything above minimal settings.

Q: What is the launch MSRP of the components?

A: The AMD Ryzen 5 7600 has a launch MSRP of $229, and the Intel Arc B580 has a launch MSRP of 249 USD.

Q: How does the GPU compare to the RTX 4060 in synthetic benchmarks?

A: The Intel Arc B580’s average benchmark score is 23021, which is 0.7% lower than the NVIDIA GeForce RTX 4060’s 23181. This places the two cards within 1% of each other, though their real-world performance in Red Dead Redemption 2 may differ.

Measured FPS Breakdown

The complete set of measured average frame rates for this combo is as follows:

At 1920x1080 (1080p), the combo produces 90.8 FPS on Low settings, 69.7 FPS on Medium, 54.7 FPS on High, and 41.2 FPS on Ultra. The progression from Low to Ultra shows a consistent drop of roughly 15-16 FPS per preset tier, with the gap between Low and Medium being the largest at 21.1 FPS.

At 2560x1440 (1440p), the results are 64.3 FPS on Low, 47.6 FPS on Medium, 38.3 FPS on High, and 32.6 FPS on Ultra. The drop from Low to Medium is 16.7 FPS, while the drop from Medium to High is 9.3 FPS, and from High to Ultra is 5.7 FPS. The smaller deltas at higher settings suggest the GPU is becoming increasingly saturated.

At 3840x2160 (4K), the frame rates are 43.5 FPS on Low, 31.0 FPS on Medium, 28.2 FPS on High, and 20.3 FPS on Ultra. The difference between Low and Medium is substantial at 12.5 FPS, but the gap narrows between Medium and High (2.8 FPS) and High to Ultra (7.9 FPS). The 4K Ultra result of 20.3 FPS is the lowest measured value across all configurations.

Comparing across resolutions, the 1080p Low result of 90.8 FPS is more than double the 4K Low result of 43.5 FPS. The 1440p Medium result of 47.6 FPS is nearly identical to the 4K Low result of 43.5 FPS, suggesting that users choosing between 1440p Medium and 4K Low will get similar performance—with 1440p offering marginally better frame rates. The data shows a consistent pattern where the GPU’s memory bandwidth and shading throughput determine the playable envelope, with the CPU comfortably keeping pace even at the lowest settings where frame rates are highest.