Ready Or Not

Ready Or Not is a tactical shooter that leans heavily on both CPU and GPU, and the data for the Intel Core Ultra 7 265K paired with the NVIDIA GeForce RTX 3070 shows a combo that is clearly capable of delivering high frame rates at 1080p and 1440p, while 4K requires more careful settings selection. The Core Ultra 7 265K is a 20-core, 20-thread processor based on the Arrow Lake architecture, with a base clock of 3.90 GHz and a boost clock of 5.50 GHz. Its 30 MB of shared L3 cache and DDR5 memory support help feed the RTX 3070, which features 8 GB of GDDR6 memory on a 256-bit bus. The benchmark results indicate that this pairing is well-balanced for the game, though the GPU's 8 GB VRAM becomes a limiting factor at higher resolutions and settings.

FAQ

Q: What is the combo's overall rank in Ready Or Not?

A: The Intel Core Ultra 7 265K + NVIDIA GeForce RTX 3070 combo ranks 1593 out of 3714 tested combinations, placing it in the upper half of all tested systems for this game.

Q: How does the CPU compare to its closest rivals in synthetic benchmarks?

A: The Core Ultra 7 265K has an average benchmark score of 70879, which is 1% higher than the Intel Core i7-14700KF and 1.3% higher than the AMD Ryzen 7 9700F. It is 0.2% behind the Intel Xeon 6511P and 0.7% behind the Intel Xeon Platinum 8270.

Q: What is the GPU's performance percentile among all graphics cards?

A: The RTX 3070 sits in the 61st percentile of all GPUs, with an average benchmark score of 17208. Its nearest rival, the AMD Radeon RX 7600 XT, scores 17083, which is 0.7% lower.

Q: What FPS can I expect at 1440p with Medium settings?

A: At 2560x1440 with Medium settings, the measured average FPS is 166, with a minimum of 141 and a maximum of 191.

Q: Is the RTX 3070's 8 GB VRAM sufficient for 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the average FPS drops to 55, indicating that the 8 GB VRAM and GPU compute limits are significant at that resolution and preset. Lowering to High at 4K yields 79 FPS average.

Q: Does the CPU hold back the GPU at 1080p?

A: At 1920x1080 with Low settings, the average FPS reaches 302, which is very high. The CPU's 20 cores and 5.50 GHz boost clock appear more than adequate to keep the RTX 3070 fed, as the GPU becomes the limiting factor at lower resolutions.

How This Combo Ranks

The combo of the Intel Core Ultra 7 265K and NVIDIA GeForce RTX 3070 achieves a rank of 1593 out of 3714 tested combinations in Ready Or Not. This places the system in the 43rd percentile of all tested combos, meaning roughly 57% of tested systems perform better in this specific game. The ranking reflects a balance: the CPU is a high-end part, sitting in the 94th percentile of all CPUs, while the GPU is more mid-range, in the 61st percentile of all GPUs. The overall combo rank is pulled down by the GPU's relative position, but the data shows that the pairing still delivers playable frame rates across most tested settings.

The CPU's benchmark position is strong. With an average score of 70879, it outperforms the Intel Core i7-14700KF by 1% and the AMD Ryzen 7 9700F by 1.3%. It is nearly identical to the Intel Xeon 6511P, which scores 71051, a 0.2% difference. This indicates that the 265K is a top-tier processor for multi-threaded workloads, which matters in Ready Or Not's tactical simulations with multiple AI characters and dynamic environments.

The GPU, by contrast, is a more modest performer. The RTX 3070's average benchmark score of 17208 puts it just ahead of the AMD Radeon RX 7600 XT (0.7% higher) and the NVIDIA GeForce GTX 690 (1% higher). The fact that the RTX 3070 is only 1.1% faster than an older card like the Radeon HD 7970M in synthetic tests highlights that this GPU is not a top-tier part in 2025, but it remains competitive for 1080p and 1440p gaming. The combo rank of 1593 reflects this reality: strong CPU, adequate GPU, and a result that is good but not elite.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor built on TSMC's 3 nm process node. It has a base clock of 3.90 GHz and a boost clock of 5.50 GHz, with 192 KB of L1 cache per core, 3 MB of L2 cache per core, and a shared 30 MB L3 cache. The CPU supports DDR5 memory with dual-channel bandwidth of 102.4 GB/s, and it is unlocked for overclocking. In synthetic benchmarks, it scores 35850 in Cinebench R23 multi-core and 2020 in single-core, while Geekbench results show 23085 multi-core and 2713 single-core. These numbers put the 265K in the 94th percentile of all CPUs.

For Ready Or Not, the CPU's role is to handle game logic, AI pathfinding, and physics calculations, which are often single-threaded or lightly threaded. The 5.50 GHz boost clock is crucial here, as higher single-core performance directly translates to smoother frame pacing in CPU-bound scenarios. The measured FPS data shows that even at 1080p Low settings, where the GPU has less work, the combo achieves 302 FPS average. This suggests that the CPU is not a bottleneck at lower resolutions, as the frame rate is high enough to saturate most displays.

The 20 cores and 20 threads also help with background tasks and any multi-threaded game systems. Ready Or Not can use multiple cores for AI and environmental interactions, and the 265K's strong multi-threaded performance, evidenced by its Cinebench R23 multi-core score of 35850, ensures that frame drops are minimized when the game becomes more complex. The CPU's nearest rival, the Intel Core i7-14700KF, scores 70163 in average benchmarks, which is 1% lower, meaning the 265K holds a slight edge in raw processing power.

Measured FPS Breakdown

The measured FPS data provides a clear picture of how this combo performs across three resolutions and four settings presets.

At 1920x1080, the lowest resolution tested, the combo delivers very high frame rates. Low settings produce an average of 302 FPS, Medium settings yield 263 FPS (with a minimum of 224 and a maximum of 302), High settings drop to 239 FPS, and Ultra settings still manage 168 FPS. These numbers indicate that at 1080p, the system is heavily GPU-bound, as even the most demanding preset stays well above 144 FPS.

Moving to 2560x1440, the frame rates remain strong but begin to scale down. Low settings average 190 FPS, Medium settings average 166 FPS (min 141, max 191), High settings average 151 FPS, and Ultra settings average 106 FPS. The gap between Low and Ultra is 84 FPS, showing that the RTX 3070's compute and memory bandwidth are being taxed more at this resolution. The minimum FPS of 141 at Medium settings suggests that the system can maintain a smooth experience on 144Hz monitors, but Ultra settings may cause occasional dips below 100 FPS.

At 3840x2160, the highest resolution tested, the performance drops significantly. Low settings average 99 FPS, Medium settings average 87 FPS (min 74, max 100), High settings average 79 FPS, and Ultra settings average 55 FPS. The 8 GB VRAM on the RTX 3070 is a limiting factor here, as 4K textures and effects can exceed that capacity. The difference between Low and Ultra at 4K is 44 FPS, and the Ultra preset's 55 FPS average is below the 60 FPS target that many players prefer. The Medium preset at 4K, with its 87 FPS average and 74 FPS minimum, offers a better balance.

GPU Role

The NVIDIA GeForce RTX 3070 is based on the GA104 chip and uses the Ampere architecture, manufactured on Samsung's 8 nm process. It has 5888 shading units, 184 texture mapping units, and 96 raster output units, along with 46 ray tracing cores and 184 tensor cores. The GPU's base clock is 1500 MHz with a boost clock of 1725 MHz, and it has 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. Its FP32 compute performance is 20.31 TFLOPS, and it supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.

In synthetic benchmarks, the RTX 3070 scores 22214 in Passmark G3D and 112821 in Geekbench OpenCL. Its average benchmark score of 17208 places it in the 61st percentile of all GPUs. The nearest rival, the AMD Radeon RX 7600 XT, scores 17083, which is 0.7% lower, indicating that the RTX 3070 is slightly faster in overall GPU compute tasks. However, the GPU's 8 GB VRAM is a notable limitation for Ready Or Not at higher resolutions.

The measured FPS data shows that the RTX 3070 scales predictably with resolution. At 1080p, the GPU is often the limiting factor, but the frame rates are so high (239-302 FPS depending on settings) that it doesn't matter. At 1440p, the GPU's workload increases, and the difference between Low and Ultra settings becomes more pronounced, from 190 FPS down to 106 FPS. At 4K, the 8 GB VRAM becomes a hard limit, particularly at Ultra settings where the 55 FPS average suggests the GPU is running out of memory and compute resources simultaneously. The Medium preset at 4K, which averages 87 FPS, shows that dialing back settings can mitigate the VRAM constraint.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate.

For 1920x1080, the system is powerful enough to run the game at Ultra settings with an average of 168 FPS. If you prioritize maximum visual fidelity and have a high-refresh-rate monitor (144Hz or above), Ultra is the best choice, as it stays above 144 FPS. For those with 240Hz displays, High settings at 239 FPS or Medium at 263 FPS will better match the refresh rate, but Ultra remains perfectly playable.

At 2560x1440, the data suggests that High settings provide the best balance of visuals and performance, with an average of 151 FPS. This is sufficient for 144Hz monitors. Ultra settings drop to 106 FPS, which is still playable on 60Hz or 120Hz displays but may feel less smooth on 144Hz panels. Medium settings at 166 FPS offer a higher headroom for frame time consistency, with a minimum of 141 FPS, making it a safer choice for competitive play. Low settings at 190 FPS are unnecessary unless you are chasing maximum frame rates.

For 3840x2160, the Ultra preset is not recommended, as the 55 FPS average falls below the 60 FPS target. High settings at 79 FPS are acceptable for 60Hz displays, but Medium settings at 87 FPS (with a minimum of 74 FPS) provide a better experience, as they maintain a more consistent frame rate above 70 FPS. Low settings at 99 FPS are the best for smooth 4K gameplay, though the visual quality reduction may be noticeable. Given the 8 GB VRAM limitation, Medium settings at 4K strike the best balance between image quality and frame rate.

The overall recommendation is to use Medium or High settings at 1440p for the most consistent experience, as this resolution and preset combination delivers high frame rates without pushing the GPU to its limits. At 1080p, Ultra is viable, and at 4K, Medium is the practical ceiling for this combo.