Ready Or Not

Ready Or Not is a tactical shooter that shows moderately heavy scaling across resolution and quality changes when paired with an Intel Core i7-14700K and an NVIDIA GeForce RTX 3070. The measured frames per second (FPS) data covers 1080p, 1440p, and 4K at Low, Medium, High, and Ultra presets, with every figure drawn from the benchmark record. This analysis interprets how the combination performs, where it sits among other tested setups, and which settings deliver the best experience for each resolution.

Resolution Scaling

The FPS drop from 1080p to 1440p and then to 4K is consistent across all four presets, indicating that the GPU becomes the dominant limiting factor only at higher pixel counts. At Low presets, the fall is 302 FPS at 1080p to 190 FPS at 1440p (a 37% reduction) and then to 99 FPS at 4K (a further 48% drop from 1440p). The Medium preset follows the same path: 263 FPS → 166 FPS → 87 FPS. The High preset goes 239 FPS → 151 FPS → 79 FPS, and Ultra goes 168 FPS → 106 FPS → 55 FPS. In each case the ratio of FPS between resolutions is roughly 0.63 from 1080p to 1440p and 0.52 from 1440p to 4K, which is remarkably uniform. This uniformity means that the performance scaling is chiefly driven by the number of pixels, not by the level of detail. If the CPU were the bottleneck at 1080p, we would see a smaller FPS gap when lowering resolution, since the GPU would be able to render faster. The data shows no such plateau: even at 1080p Low, 302 FPS, so the CPU is far from the limiting component. The only notable irregularity is the min‑FPS values in the Medium preset: at 1080p the minimum is 224 FPS, at 1440p it is 141 FPS, and at 4K it drops to 74 FPS. These minima still stay above 60 FPS, confirming that the combination does not spike into unplayable territory at any of the measured settings.

How This Combo Ranks

The pair of the Core i7-14700K and RTX 3070 holds the 1593rd position out of 3714 tested combinations in Ready Or Not. In other words, it will appear in the top 57% of all benchmarked configurations, meaning that 2121 combos deliver lower average FPS. The rank reflects the fact that the RTX 3070, while capable at 1080p and 1440p, drops into the 60–70% performance bracket at 4K Ultra. In percentage terms, this combo sits at the 43rd percentile (rank/ total), which is above the median test setup. It is important to note that the rank is a combined measure of CPU and GPU performance, but because the game is resolution‑sensitive, the ranking tends to reward combos that keep a strong GPU at all resolutions. The i7-14700K here provides a steady platform, but the RTX 3070’s 8 GB VRAM and its limited by 5% margin are the main contributors to the overall placement. The data indicates that for a typical 1440p high‑refresh‑rate display, this setup would land near the middle of the pack, while for 4K it would fall into the lower half of the field.

CPU Role

The Intel Core i7-14700K is a 20‑core, 28‑thread processor from the Raptor Lake Refresh architecture. It runs at a base clock of 3.40 GHz and a boost of 5.60 GHz, with a TDP of 125 W. Its arrival on the market was in October 2023. The benchmark record that follows shows the CPU’s strength in single‑threaded and multi‑threaded workloads: a Geekbench single‑core score of 2569 and a multi‑core score of 20767, a Cinebench R23 single‑core of 2160 and multicore of 33440.5, and a passmark multi‑thread of 52392. These figures place the CPU in the 94th percentile of all processors tested. Its nearest rivals in the viral scoring the data show just a few tenths of a percentage point separates it from the AMD EPYC 9115 (0.1% faster), the Ryzen 9 7950X (‑0.2%), the Ryzen 9 7940HX (‑0.7%), and the Ryzen 7 9700F (‑0.9%). Such consistency implies that the i7‑14700K is in a highly competitive performance band, and in a game like Ready Or Not – another that typically uses less than eight threads – its strong single‑core performance is enough to feed the GPU at any resolution. The CPU’s 33 MB of L3 cache also helps with engine logic and entry generation, but the benchmark data shows that the frame rate in this test is almost entirely determined by the GPU, as evidenced by the identical scaling ratios at all preset levels. In short, the CPU does not constrain this setup: it supplies whatever the GPU demands, even at 4K with all details maxed.

Measured FPS Breakdown

The following table compiles every result from the benchmark measurement. Each resolution and settings combination includes the average FPS, with the Medium rows additionally listing minimum and maximum values.

| Resolution | Setting | Avg FPS | Min FPS | Max FPS |

|------------|---------|---------|---------|---------|

| 3840x2160 | High | 79 | — | — |

| 3840x2160 | Low | 99 | — | — |

| 3840x2160 | Medium | 87 | 74 | 100 |

| 3840x2160 | Ultra | 55 | — | — |

| 2560x1440 | High | 151 | — | — |

| 2560x1440 | Low | 190 | — | — |

| 2560x1440 | Medium | 166 | 141 | 191 |

| 2560x1440 | Ultra | 106 | — | — |

| 1920x1080 | High | 239 | — | — |

| 1920x1080 | Low | 302 | — | — |

| 1920x1080 | Medium | 263 | 224 | 302 |

| 1920x1080 | Ultra | 168 | — | — |

Across the three resolutions, the Low preset delivers the highest FPS, but the differences between Low and Medium are modest: at 1080p, Low hits 302 FPS and Medium 263 FPS; at 4K, Low 99 and Medium 87. The biggest drop occurs when moving from Medium to High to Ultra. For every resolution, Ultra is the only preset that falls below a critical playable threshold. At 4K Ultra, the average is only 55 FPS, which is below any 60 Hz minimum. Meanwhile, at High at 4K, the average is 79 FPS, and Medium yields 87 FPS, both comfortably above 60 FPS. The Medium preset also comes with measured minima; at 4K its 74 FPS minimum is still smooth, while at 1080p the 224 FPS minimum is far ahead of any viewpoint.

The data show that the RTX 3070 can drive 1440p Ultra at 106 FPS average, and 1080p Ultra at 168, making those presets fully playable. The only question is whether the user needs to prioritize consistency or absolute visual quality at 4K.

GPU Role

The NVIDIA GeForce RTX 3070 is a GA104 chip from the Ampere generation, built on Samsung’s 8‑nm process. It features 8 GB of GDDR6 memory on a 256‑bit bus, yielding a bandwidth of 448.0 GB/s. The chip has 5,888 shading units, 184 texture mapping units and 96 ROPs, with 46 RT cores and 184 tensor cores. The base clock is 1500 MHz and boost 1725 MHz, AMD fills a TDP of 220 W and a power connector of 1× 12‑pin. In this benchmark, the GPU operates with a Cinebench R23 score of 33440.6 on the CPU side, but is a 61st‑percentile GPU in the database. Its average benchmark score is 17,208, and its nearest rivals are the Radeon RX 7600 XT (0.7% faster), the GeForce GTX 690 (1.0% faster), the Radeon HD 7970M (1.1% faster), and the Tesla K40c (‑1.5% slower). That near‑tie points to a mid‑range performance tier that is optimized for 1080p to 1440p, with a short‑term capability for 4K.

The GPU’s VRAM at 8 GB proves sufficient for all presets in this test; no out‑of‑memory indications appear in the data. Yet the low‑level details at 4K reveal the hardware gravity: moving from 1440p Ultra (106 FPS) to 4K Ultra (55 FPS) is a drop of 51 FPS, which is a 48% fall off. The high-bandwidth memory helps maintenance Microframe timing in the Middle setting, where the min‑FPS numbers stay above 60 in all resolutions. The RTX 3070 clearly serves its intended role for 1080p high‑refreshing displays and for 1440p high‑refresh gameplay, while maintaining usable performance at 4K only if it receives a lowered preset.

Settings Recommendations

The measured ratios are clear about the best settings for each resolution.

• 1080p (1920×1080): All presets deliver over 168 FPS. The Ultra preset runs at 168 FPS average, which is well above 144 Hz. Therefore, Ultra is the recommended preset for 1080p; there is no need to sacrifice visual quality for frame rate. If you have a 360 Hz monitor, the Low preset could hit 302 FPS, but the gains from lowering from Ultra to Low are diminished while the visual trade‑off is pronounced.

• 1440p (2560×1440): The Ultra preset averages 106 FPS, which is still above 60 and supports 144 Hz at lower settings. Medium runs at 166 FPS avg with a minimum of 141 FPS; this is the best combination of smoothness and quality. Hence, Medium is the recommended preset for 1440p to keep minimal FPS above 141 and avoid micro‑stutter. If a stable 144 Hz is not mandatory, Ultra’s 106 FPS average may be acceptable, but the Medium preset is the most consistent.

• 4K (3840×2160): Only the Low, Medium, and High presets can hold 60 FPS or better; Ultra falls to 55 FPS and should be avoided for typical play. Among the three, Medium provides 87 FPS with a default minimum of 74 FPS, while High yields 79 FPS but lacks a recorded minimum. Because the Medium preset includes that minimum and both average values are above 60, Medium is the practical recommendation for 4K in this combination. For players who pursue maximum visual detail, High is a near‑60 option, but the compromise in 9 FPS likely beneficial for a smoother experience.

Across all resolutions, the Medium preset appears as the safest balance between quality and uniformity – it yields 263 FPS at 1080p, 166 FPS at 1440p, and 87 FPS at 4K. If the user’s monitor is a 144 Hz panel, 1440p Ultra is a strong choice; for a 4K panel, Medium is recommended.

FAQ

Q: At what resolution does the Core i7-14700K + RTX 3070 combo fail to achieve 60 FPS on average?

A: At 4K with the Ultra preset, the average FPS is 55, which is below the 60 FPS target. At all other resolutions and presets, the average exceeds 60 FPS.

Q: What is the most reliable preset at 1440p that has a known minimum FPS?**

A: The Medium preset at 1440p reports an average of 166 FPS, a minimum of 141 FPS, and a maximum of 191 FPS, making it the only tested preset at that resolution that provides minimum data, all above 60.

Q: How much performance does the Ultra preset cost over Low at 1080p?**

A: At 1920×1080, the Low preset averages 302 FPS while Ultra averages 168 FPS, a difference of 134 FPS (which is about 44% less perfomers).

Q: Which settings should be used for a 60 Hz 4K monitor?**

A: Medium is the best option, averaging 87 FPS with a minimum of 74 FPS, and Low and High also exceed 60 FPS (99 and 79, respectively), but Medium gives the highest average FPS above 100?

Q: What is the VRAM capacity and type given for the RTX 3070 in this test?**

A: The GPU is equipped with 8 GB of GDDR6 memory and a 256‑bit bus, yielding a bandwidth of 448.0 GB/s.

Q: Where does this combo rank among all tested GPU+CPU pairs?**

A: It places at rank 1593 of 3714 combinations, meaning it performs better than 2121 total configurations (the bottom 57% of the list).