Ready Or Not
This combination delivers exceptional performance with an average of 237 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 82 | 120 | 131 | 149 |
| 1440p QHD | 159 | 228 | 250 | 282 |
| 1080p Full HD | 250 | 354 | 395 | 451 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i5-14600KF + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
# Ready Or Not: Intel Core i5-14600KF + NVIDIA GeForce RTX 5070 Ti
The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 5070 Ti delivers a formidable Ready Or Not experience, with the data showing this combo ranks 144th out of 1,748 tested combinations. That places it in the top 8.2% of all tested systems, a strong position for a tactical shooter where frame rate consistency matters as much as raw speed. The benchmark results reveal a system that is heavily GPU-limited at higher resolutions but capable of extraordinary frame rates at 1080p, making it a versatile choice for players who prioritize either competitive responsiveness or visual fidelity.
Resolution Scaling
The measured FPS data shows a clear and predictable scaling pattern as resolution increases, though the magnitude of the drop varies significantly by settings preset. At Low settings, the transition from 1920x1080 to 2560x1440 sees average FPS fall from 451 to 282, a 37.5% reduction. Moving further to 3840x2160 drops the average to 148.8, representing a 47.2% decrease from the 1440p figure. This steep decline indicates that even at Low settings, the RTX 5070 Ti's rendering workload at 4K is substantial enough to cut deeply into the frame rate headroom.
The High preset tells a similar story with slightly smaller percentage drops. From 353.8 FPS at 1080p, the average falls to 228.1 at 1440p (a 35.5% reduction) and then to 119.8 at 4K (a 47.5% reduction from 1440p). The Ultra preset shows the most dramatic scaling: 250.2 FPS at 1080p drops to 158.6 at 1440p (36.6% lower) and then plummets to 82.3 at 4K, a 48.1% reduction from the 1440p result.
The consistent ~35-37% drop from 1080p to 1440p and the ~47-48% drop from 1440p to 4K across all presets indicates that the RTX 5070 Ti is the limiting component throughout. The Intel Core i5-14600KF, with its 14 cores and 20 threads based on Raptor Lake architecture, provides ample processing headroom even at 1080p where CPU overhead typically becomes more visible. The fact that Low settings at 1080p yields 451 FPS without the CPU bottlenecking suggests the processor is well-matched to this GPU for this title.
Settings Recommendations
The measured data reveals that the Medium preset offers the most balanced experience across all resolutions. At 1920x1080, Medium delivers 394.5 FPS, which is 12.5% below the Low preset's 451 FPS but 11.5% above High's 353.8 FPS. The gap between Medium and Ultra at 1080p is substantial, with Ultra producing 250.2 FPS — a 36.6% reduction from Medium. This suggests that the visual quality jump from Medium to Ultra carries a heavy performance tax that may not be justified for competitive play.
At 2560x1440, the Medium preset's 250.2 FPS is particularly compelling. It maintains a high refresh rate experience while offering better visual fidelity than Low's 282 FPS. The High preset at 1440p produces 228.1 FPS, still well above the 144Hz threshold, while Ultra drops to 158.6 FPS. For players with 1440p high-refresh displays, Medium or High are the sensible choices, with Medium providing 9.7% more performance than High at this resolution.
The 4K results show a more constrained picture. Ultra at 3840x2160 produces 82.3 FPS, which is playable but not ideal for a tactical shooter where reaction time matters. High at 4K delivers 119.8 FPS, a 45.6% improvement over Ultra, while Medium reaches 130.5 FPS. For 4K players, the High preset appears to be the sweet spot, offering a 45.6% frame rate advantage over Ultra while presumably retaining most of the visual polish. The data indicates that Ultra settings at 4K should only be considered on displays with VRR capabilities, as the 82.3 FPS average may dip below comfortable thresholds during intense firefights.
How This Combo Ranks
With a rank of 144 out of 1,748 tested combinations, this system sits in the 91.8th percentile of all tested configurations for Ready Or Not. This positioning reflects the strength of the RTX 5070 Ti, which itself ranks in the 87th percentile among all GPUs with an average benchmark score of 52,086. The GPU's nearest rival, the NVIDIA GeForce RTX 4080, scores 52,085 — a deltaPct of 0%, meaning these two cards are effectively performance-equivalent in synthetic benchmarks.
The Intel Core i5-14600KF holds a 93rd percentile ranking among all CPUs with an average benchmark score of 49,367. Its nearest rival is the AMD EPYC 4345P at 49,595, which is 0.5% faster, while the Intel Core i5-14600K trails by a mere 0.4% at 49,166. This CPU's strong single-thread performance, evidenced by a Cinebench R23 single-core score of 4,643, likely contributes to the high frame rates observed at 1080p where per-core performance often dictates results.
The combination's rank of 144 suggests that while many systems can run Ready Or Not, very few can match this level of performance across all settings and resolutions. The gap between this combo and lower-ranked systems is likely substantial, as the top 8.2% of 1,748 configurations represents an elite tier of hardware.
Measured FPS Breakdown
At 1920x1080, the data shows a clear hierarchy across presets. Low settings produce 451 FPS average, which is the highest measured result in the entire dataset. Medium follows at 394.5 FPS, then High at 353.8 FPS, with Ultra bringing up the rear at 250.2 FPS. The performance span from Low to Ultra at 1080p is 200.8 FPS, representing a 44.5% reduction in frame rate when maxing out all visual options.
The 2560x1440 results follow the same ordering but with compressed margins. Low delivers 282 FPS, Medium 250.2 FPS, High 228.1 FPS, and Ultra 158.6 FPS. The difference between Low and Ultra at 1440p is 123.4 FPS, a 43.8% reduction. Notably, the Medium preset at 1440p (250.2 FPS) exactly matches the Ultra preset at 1080p (250.2 FPS), illustrating how resolution scaling and settings adjustments can offset each other.
At 3840x2160, the data shows the system's limits. Low produces 148.8 FPS, which is still a highly playable frame rate for a tactical shooter. Medium achieves 130.5 FPS, High 119.8 FPS, and Ultra drops to 82.3 FPS. The gap between Low and Ultra at 4K is 66.5 FPS, a 44.7% reduction. The 4K results demonstrate that even with a top-tier GPU, Ultra settings at 4K push the RTX 5070 Ti to its limits, while Low settings at 4K still deliver more than double the frame rate of Ultra at the same resolution.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture using TSMC's 5 nm process node, with a die size of 378 mm² and 45,600 million transistors. It features 16 GB of GDDR7 memory on a 256-bit bus, providing 896.0 GB/s of bandwidth. The GPU operates at a base clock of 2,295 MHz with a boost clock of 2,452 MHz, and memory runs at 1,750 MHz with 28 Gbps effective speed.
The 16 GB VRAM capacity is sufficient for Ready Or Not's texture-heavy environments at all tested settings, as evidenced by the absence of any anomalous performance drops that would indicate memory capacity limitations. The GPU's 8,960 shading units, 280 texture mapping units, and 96 render output units provide the computational foundation for the high frame rates observed. The memory bandwidth of 896.0 GB/s proves adequate even at 4K Ultra, where the 82.3 FPS result suggests bandwidth is not the primary constraint.
The RTX 5070 Ti's benchmark scores reinforce its strong positioning. It achieves a 3DMark Steel Nomad DX12 score of 6,604 and a Passmark G3D score of 32,974. In OpenCL and Vulkan workloads, it scores 231,226 and 227,554 respectively. The GPU's Passmark GPU Compute score of 20,203 indicates solid compute performance that may benefit future game updates or additional graphical features. With a TDP of 300 W and a dual-slot design measuring 304 mm in length, this card is a substantial piece of hardware, but its performance in Ready Or Not justifies the physical footprint. The 70 ray tracing cores and 280 tensor cores enable advanced rendering features, though the measured data shows that even without relying heavily on these capabilities, the card delivers exceptional results in this title.
Hardware Specifications
Intel Core i5-14600KF
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14600KF + NVIDIA GeForce RTX 5070 Ti in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 148.8 |
| 3840x2160 | Medium | 130.5 |
| 3840x2160 | High | 119.8 |
| 3840x2160 | Ultra | 82.3 |
| 2560x1440 | Low | 282.0 |
| 2560x1440 | Medium | 250.2 |
| 2560x1440 | High | 228.1 |
| 2560x1440 | Ultra | 158.6 |
| 1920x1080 | Low | 451.0 |
| 1920x1080 | Medium | 394.5 |
| 1920x1080 | High | 353.8 |
| 1920x1080 | Ultra | 250.2 |
Ready Or Not with ii5-14600KF + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 5070 Ti + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii5-14600KF + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.