Ready Or Not
This combination delivers exceptional performance with an average of 227 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 78 | 111 | 125 | 140 |
| 1440p QHD | 153 | 214 | 238 | 274 |
| 1080p Full HD | 242 | 338 | 377 | 434 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i5-14600KF + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis
Ready Or Not, a tactical shooter emphasizing squad-based CQB, presents a distinctive load for the Intel Core i5-14600KF and NVIDIA GeForce RTX 4070 Ti combination. The measured data reveals a system that is overwhelmingly GPU-bound at higher resolutions, while the processor’s strong single-thread performance ensures headroom at 1080p. The benchmark results show a configuration capable of delivering high frame rates across all tested settings, though the scaling behavior provides critical insight into where the performance ceiling lies.
Resolution Scaling
The frame rate progression from 1920x1080 to 3840x2160 demonstrates a classic GPU-bound scaling pattern, but the magnitude of the drops varies significantly by settings preset. At High settings, the average frame rate falls from 338.4 FPS at 1080p to 213.6 FPS at 1440p, a reduction of 36.9%, and then to 110.7 FPS at 4K, which is a 67.3% drop from the 1080p baseline. This steep decline indicates that the RTX 4070 Ti is the limiting factor at higher resolutions, as the pixel throughput demand outpaces the GPU’s shading capabilities.
At Low settings, the scaling is even more pronounced, with the average dropping from 434.1 FPS at 1080p to 274 FPS at 1440p (a 36.9% drop) and further to 139.6 FPS at 4K (a 67.8% drop from 1080p). The similarity in percentage drops between High and Low settings is notable—it suggests that even when graphical effects are minimized, the resolution is the dominant variable affecting performance. The data implies that at 1080p Low, the CPU may be nearing its limit, as the 434.1 FPS figure is exceptionally high, but the frame rate still scales almost linearly with pixel count.
The Ultra preset shows the most dramatic scaling, dropping from 242.1 FPS at 1080p to 152.8 FPS at 1440p (a 36.9% drop) and then to 77.7 FPS at 4K, which is a 67.9% reduction from the 1080p result. This consistent 36-37% drop from 1080p to 1440p and 67-68% drop from 1080p to 4K across all settings presets strongly indicates that the RTX 4070 Ti’s rendering pipeline, rather than the CPU or memory subsystem, is the bottleneck. The i5-14600KF, with its 14 cores and 20 threads, provides sufficient compute headroom to feed the GPU even at 1080p, as evidenced by the exceptionally high frame rates at that resolution.
FAQ
Q: What is the highest average frame rate achieved by this combination?
A: The highest measured average is 434.1 FPS, achieved at 1920x1080 resolution with Low settings.
Q: How does the CPU compare to its closest rival in overall benchmark scores?
A: The Intel Core i5-14600KF has an average benchmark score of 49367, which is 0.4% higher than the Intel Core i5-14600K (49166) and 0.6% higher than the AMD Ryzen 9 5950X (49062).
Q: What is the performance difference between the Low and Ultra presets at 4K?
A: At 3840x2160, the Low preset averages 139.6 FPS, while the Ultra preset averages 77.7 FPS, representing a 44.3% reduction in frame rate when moving from Low to Ultra.
Q: Can this system maintain 60 FPS at 4K Ultra?
A: Yes, the measured average at 3840x2160 with Ultra settings is 77.7 FPS, which is above the 60 FPS threshold, with no minimum frame rate data provided to indicate potential dips.
Q: How does the GPU’s benchmark score position it against the RTX 5090 Mobile?
A: The RTX 4070 Ti has an average benchmark score of 44900, which is 0.6% lower than the NVIDIA GeForce RTX 5090 Mobile (45152), indicating near-parity in synthetic tests.
Q: What is the frame rate drop from 1080p to 1440p at Medium settings?
A: The average frame rate drops from 376.8 FPS at 1920x1080 to 237.5 FPS at 2560x1440, a reduction of 37.0%.
GPU Role
The NVIDIA GeForce RTX 4070 Ti plays a central role in defining the frame rates observed in Ready Or Not. With 12 GB of GDDR6X memory on a 192-bit bus, the card provides a memory bandwidth of 504.2 GB/s, which is sufficient for the game’s texture and geometry demands at 4K Ultra, as evidenced by the 77.7 FPS result. The GPU’s boost clock of 2610 MHz, combined with its 7680 shading units, drives the high pixel throughput required for the resolution scaling seen in the data. The card’s 60 RT cores and 240 tensor cores are architectural features that support advanced effects, though the measured data does not isolate their specific impact on frame rates.
The GPU’s performance percentile, ranking in the 85th percentile of all GPUs, places it in a strong position for this title. Its nearest rival, the RTX 5090 Mobile, is only 0.6% faster in average benchmark score, yet the desktop RTX 4070 Ti is able to deliver 4K Ultra performance above 60 FPS, which is a demanding scenario for any card. The 40.09 TFLOPS FP32 compute capability and 626.4 GTexel/s texture rate are the raw numbers that explain why the card scales from 139.6 FPS at 4K Low to 77.7 FPS at 4K Ultra—the latter preset likely increases shading complexity and texture filtering, which directly taxes these resources.
The 12 GB VRAM capacity is a critical factor at 3840x2160, where higher resolutions and Ultra settings can exceed smaller memory pools. The data shows a 44.3% frame rate drop from Low to Ultra at 4K, which aligns with the increased memory pressure and bandwidth utilization. The GPU’s 285 W TDP and dual-slot design indicate a power-hungry component, but the measured performance justifies the thermal envelope. The card’s production status is end-of-life, yet its benchmark scores and in-game results show it remains competitive for this tactical shooter.
Measured FPS Breakdown
At 1920x1080, the combination delivers exceptionally high frame rates across all settings. The Low preset leads with 434.1 FPS, followed by Medium at 376.8 FPS, High at 338.4 FPS, and Ultra at 242.1 FPS. The difference between Low and Ultra is 192 FPS, or 44.2% lower at Ultra, indicating that even the most demanding settings at 1080p do not stress the GPU enough to fall below 240 FPS. These numbers suggest that the i5-14600KF is capable of feeding the GPU adequately, as the CPU’s single-thread performance (Cinebench R23 single-core score of 4643) supports high draw call throughput.
Moving to 2560x1440, the frame rates remain high but show a clear step down. Low settings produce 274 FPS, Medium achieves 237.5 FPS, High reaches 213.6 FPS, and Ultra drops to 152.8 FPS. The percentage reduction from 1080p to 1440p is consistent at approximately 36.9% for Low, High, and Ultra, while Medium shows a 37.0% drop. This uniformity across presets reinforces that the resolution change, not the settings level, is the primary driver of the performance shift. The 1440p Ultra result of 152.8 FPS is particularly strong, providing a high refresh rate experience for users with 144Hz monitors.
At 3840x2160, the GPU’s workload becomes substantial. Low settings average 139.6 FPS, Medium drops to 125.1 FPS, High falls to 110.7 FPS, and Ultra reaches 77.7 FPS. The scaling from Low to Ultra at 4K is steeper than at lower resolutions, with a 44.3% reduction, suggesting that Ultra settings introduce effects that disproportionately impact the GPU at high pixel counts. The 4K High result of 110.7 FPS is notable, as it provides a smooth experience on high-refresh 4K displays, while Ultra still maintains above 60 FPS. The data shows no minimum frame rate values, so the consistency of these averages cannot be fully assessed, but the averages themselves indicate a well-balanced system for this title.
Settings Recommendations
The measured data suggests that the Ultra preset is the most demanding, with the largest frame rate penalty at every resolution. At 1080p, Ultra delivers 242.1 FPS, which is still remarkably high for competitive play, but the 44.2% reduction compared to Low indicates that the visual improvements may not justify the performance cost for players with high refresh rate monitors. For 1440p users, Ultra at 152.8 FPS is an excellent sweet spot, as it provides high visual fidelity while remaining well above the 144Hz threshold.
For 4K gaming, the choice is more nuanced. The High preset at 110.7 FPS offers the best balance of visual quality and performance, as it maintains a comfortable margin above 60 FPS while providing better detail than Low or Medium. The Ultra preset at 77.7 FPS is playable but introduces a significant 29.8% frame rate drop compared to High, which may be noticeable in fast-paced firefights. The Medium preset at 125.1 FPS is a viable alternative for users who prioritize frame rate over maximum visual fidelity, but the data shows that High provides a better performance-to-quality ratio than Medium, with only a 11.5% reduction from Medium to High.
Given the system’s capability, the recommendation is to use High settings at 4K for a balanced experience, or Ultra at 1440p for those with high refresh monitors. At 1080p, any preset is viable, but High offers a middle ground that preserves detail without sacrificing the high frame rates that competitive players seek. The data does not include minimum frame rate information, so users seeking absolute consistency may prefer Medium settings at 4K, which provides a 61% higher average than Ultra.
Hardware Specifications
Intel Core i5-14600KF
NVIDIA GeForce RTX 4070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14600KF + NVIDIA GeForce RTX 4070 Ti in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 139.6 |
| 3840x2160 | Medium | 125.1 |
| 3840x2160 | High | 110.7 |
| 3840x2160 | Ultra | 77.7 |
| 2560x1440 | Low | 274.0 |
| 2560x1440 | Medium | 237.5 |
| 2560x1440 | High | 213.6 |
| 2560x1440 | Ultra | 152.8 |
| 1920x1080 | Low | 434.1 |
| 1920x1080 | Medium | 376.8 |
| 1920x1080 | High | 338.4 |
| 1920x1080 | Ultra | 242.1 |
Ready Or Not with ii5-14600KF + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 4070 Ti + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii5-14600KF + RTX 4070 Ti
Explore FPS benchmarks for other games using this same hardware combination.