Ready Or Not

Resolution Scaling

The measured frame rates for Ready Or Not with the Intel Core i7-14700F and NVIDIA GeForce RTX 5070 Ti show a clear progression as resolution climbs. At 1080p with High settings, the combo delivers 356.8 FPS. Moving to 1440p drops that to 225 FPS, a 37% reduction in raw throughput. At 4K, the average falls further to 117.2 FPS, which is roughly half of the 1440p result and just under a third of the 1080p figure.

This scaling pattern reveals where the bottleneck shifts. At 1920x1080, the frame rates are extraordinarily high — 450.8 FPS at Low settings — which suggests the CPU is doing heavy lifting to feed the GPU. The Core i7-14700F has 20 cores and 28 threads, and its 5.40 GHz boost clock helps maintain these triple-digit numbers. However, the data indicates that at 1080p, the RTX 5070 Ti is not fully saturated; the gap between Low and Ultra at 1080p is 201.5 FPS, showing that the GPU has ample headroom to render more complex scenes when the preset allows it.

At 4K, the story inverts. Ultra settings produce 81.5 FPS, while Low produces 150.5 FPS. The spread between presets at 4K is 69 FPS, compared to 201.5 FPS at 1080p. This compression indicates that the GPU becomes the limiting component at higher resolutions. The RTX 5070 Ti’s 16 GB of GDDR7 memory and 896.0 GB/s bandwidth are sufficient for the higher pixel counts, but the rendering load from 3840x2160 ultimately caps performance more than the CPU does.

The 1440p results sit in a balanced middle ground. High settings deliver 225 FPS, which is a strong figure for a tactical shooter where frame timing matters for aiming precision. The data suggests that 1440p is the sweet spot where neither the CPU nor the GPU is severely constrained, allowing the system to stretch its legs without hitting the walls seen at either extreme.

Settings Recommendations

The measured rows provide a clear hierarchy of presets, and the data points to High as the optimal balance for most users. At 4K, High delivers 117.2 FPS, which is 35.7 FPS ahead of Ultra’s 81.5 FPS. The jump from Medium to High at 4K costs only 11.9 FPS (from 129.1 to 117.2), while the jump from High to Ultra costs 35.7 FPS. This suggests that Ultra’s visual gains carry a disproportionate performance penalty at 4K.

At 1440p, High produces 225 FPS, while Medium produces 246.9 FPS. The difference is 21.9 FPS, which is noticeable but not critical for competitive play. Ultra at 1440p drops to 159.6 FPS, a 65.4 FPS reduction from High. Given that High already exceeds 200 FPS, the extra visual fidelity of Ultra is hard to justify for most setups, especially on displays that refresh at 144 Hz or 165 Hz.

At 1080p, even Ultra delivers 249.3 FPS, so users on high-refresh monitors can safely max out settings without concern. Low at 1080p hits 450.8 FPS, but that preset likely strips away too much environmental detail for a tactical shooter where visual cues matter. The data indicates that High is the recommended default across all resolutions. It provides the best frame rate per visual quality step, with 356.8 FPS at 1080p, 225 FPS at 1440p, and 117.2 FPS at 4K — all smooth figures for the genre.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture with a 5 nm process from TSMC. Its 8960 shading units and 70 RT cores handle Ready Or Not’s lighting and shadow work efficiently. The GPU’s boost clock of 2452 MHz, paired with 16 GB of GDDR7 memory on a 256-bit bus, yields 896.0 GB/s of bandwidth. This memory configuration is crucial for a game that loads detailed environments and textures, particularly at 4K where the framebuffer demands are highest.

The benchmark data shows the GPU’s raw compute capability. In 3DMark Steel Nomad DX12, the card scores 6604, placing it in the 87th percentile of all GPUs. Its average benchmark score of 52086 sits exactly level with the NVIDIA GeForce RTX 4080, which has a deltaPct of 0. This parity is reflected in gaming performance, where the RTX 5070 Ti handles 4K Ultra at 81.5 FPS — a playable figure, though not maximal.

The GPU’s passmark G3D score of 32974 and compute score of 20203 indicate strong general-purpose and gaming performance. The 43.94 TFLOPS FP32 throughput is substantial, and the texture rate of 686.6 GTexel/s ensures that high-resolution textures don’t stall the pipeline. The pixel rate of 235.4 GPixel/s is adequate for 4K, but the data shows that Ultra settings at 3840x2160 push the card to its limits, producing the lowest measured average of 81.5 FPS.

The RTX 5070 Ti’s 300 W TDP and 700 W suggested PSU are typical for this performance class. The 16-pin power connector and dual-slot design are standard. The card’s 304 mm length may require a spacious case, but this is a minor consideration given the performance on offer.

FAQ

Q: How does the RTX 5070 Ti compare to the RTX 4080 in this system?

A: The RTX 5070 Ti has an average benchmark score of 52086, which is exactly equal to the RTX 4080’s 52085, resulting in a deltaPct of 0. This indicates nearly identical overall performance in synthetic benchmarks, and the measured FPS in Ready Or Not reflects that class of capability.

Q: What is the highest playable setting at 4K?

A: High settings at 3840x2160 produce 117.2 FPS, which is smooth for a tactical shooter. Ultra drops to 81.5 FPS, which is still playable but leaves less headroom for frame drops during intense firefights.

Q: Does the CPU bottleneck the GPU at 1080p?

A: The data suggests some CPU limitation at 1920x1080. Low settings produce 450.8 FPS, while Ultra produces 249.3 FPS, a gap of 201.5 FPS. At 4K, the same preset gap is only 69 FPS, indicating the GPU becomes the limiting factor at higher resolutions.

Q: How does the Core i7-14700F score relative to its nearest rivals?

A: The CPU’s average benchmark score is 54097, which places it in the 94th percentile of all CPUs. It trails the AMD Ryzen 9 9900X by 0.6% and the Ryzen 9 9900X3D by 1.1%, but beats the Intel Xeon Phi 7290 by 1.2% and the AMD EPYC 7313P by 1.7%.

Q: Is 16 GB of VRAM enough for this game?

A: Yes, the RTX 5070 Ti’s 16 GB of GDDR7 memory is more than sufficient. The highest measured preset at 4K (Ultra) still runs at 81.5 FPS, suggesting no VRAM capacity issues are limiting performance.

Q: What frame rate can I expect at 1440p with High settings?

A: The measured average is 225 FPS at 2560x1440 with High settings. This is well above the refresh rate of most gaming monitors and provides excellent responsiveness for the genre.

CPU Role

The Intel Core i7-14700F is a 20-core, 28-thread processor based on the Raptor Lake architecture, fabricated on Intel’s 10 nm process. Its base clock of 2.10 GHz boosts up to 5.40 GHz, and the 33 MB of shared L3 cache helps feed the RTX 5070 Ti with data. The CPU’s benchmark scores reflect its multi-threaded strength: a Cinebench R23 multi-core score of 35443 and a single-core score of 5003. In PassMark’s multithread test, it scores 41765, with a single-thread score of 4261.

The data shows that the CPU is a capable partner for the GPU in Ready Or Not. At 1080p Low, the system hits 450.8 FPS, which is a massive number that only a strong CPU can support. The 5.40 GHz boost clock is critical here; it allows the processor to handle game logic, AI pathfinding, and physics calculations quickly enough to keep the frame pipeline full. The 20 cores also matter for background tasks and streaming, though the game itself likely uses fewer threads.

The CPU’s percentile ranking of 94 places it among the top processors available. Its nearest rival, the AMD Ryzen 9 9900X, scores 54450 versus the i7-14700F’s 54097, a marginal 0.6% deficit. This means the i7-14700F offers essentially the same compute performance as a high-end AMD part, making it more than adequate for this game.

The measured FPS at higher resolutions further confirms that the CPU is not the primary constraint. At 4K, the frame rates scale down consistently across presets, which is a hallmark of GPU-bound rendering. If the CPU were struggling, we would see smaller differences between presets at 1080p and larger ones at 4K. Instead, the data shows the opposite, indicating that the i7-14700F has ample headroom even at 1080p.

The CPU’s memory support for both DDR4 and DDR5, along with dual-channel architecture, provides flexibility, though the game’s performance does not appear to hinge on memory bandwidth. The 65 W TDP is modest, and the processor is not multiplier-unlocked, but for gaming workloads, the stock configuration is more than sufficient based on these results.