Ready Or Not
This combination delivers exceptional performance with an average of 124 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 62 | 68 | 78 |
| 1440p QHD | 83 | 118 | 130 | 149 |
| 1080p Full HD | 132 | 187 | 206 | 236 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i5-14400F + NVIDIA GeForce RTX 5050, In-Depth Analysis
# Ready Or Not with Intel Core i5-14400F + NVIDIA GeForce RTX 5050
The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5050 delivers a wide spread of performance across Ready Or Not's resolution and settings matrix, ranging from a highly playable 62 FPS average at 4K High to a fluid 236 FPS average at 1080p Low. This combination ranks 1782nd out of 2947 tested combos in this title, placing it in the lower-middle portion of the database, yet the measured frame rates indicate that the pairing is well-balanced for most practical gaming scenarios.
Resolution Scaling
The performance drop from 1080p to 4K reveals a classic GPU-bound scaling pattern, with the RTX 5050 becoming the clear limiting component as pixel count rises. At High settings, the average frame rate falls from 187 FPS at 1920x1080 to 118 FPS at 2560x1440, a reduction of 69 FPS, then further to 62 FPS at 3840x2160, representing an additional 56 FPS drop. The scaling from 1440p to 4K is particularly steep, with the 4K result being roughly half of the 1440p figure, which is consistent with the 2.25x pixel count increase between these resolutions.
The Low settings preset demonstrates the same scaling trend but from a higher absolute baseline. At 1080p Low, the combo produces 236 FPS average, which falls to 149 FPS at 1440p and 78 FPS at 4K. The percentage drop from 1080p to 1440p is approximately 37%, while the drop from 1440p to 4K is approximately 48%, indicating that the GPU's rendering workload grows disproportionately at higher resolutions. This is a clear signal that the RTX 5050's 8 GB VRAM and 128-bit memory interface begin to constrain performance when the frame buffer demands increase.
Medium settings show a similar pattern, with 206 FPS at 1080p, 130 FPS at 1440p, and 68 FPS at 4K. The 4K Medium result includes a measured minimum of 58 FPS and maximum of 78 FPS, showing a 20 FPS variance that suggests occasional frame time spikes under heavy scene complexity. Ultra settings push the GPU hardest, with 132 FPS at 1080p dropping to 83 FPS at 1440p and a demanding 43 FPS at 4K, which falls below the 60 FPS threshold typically considered smooth for a tactical shooter.
The scaling behavior indicates that at 1080p, the CPU still has headroom to feed the GPU, but at 4K, the RTX 5050's raw throughput and memory bandwidth become the primary bottleneck. The 320.0 GB/s memory bandwidth and 13.17 TFLOPS FP32 performance are the key specifications driving this limitation, as higher resolutions demand exponentially more memory traffic and shader work.
FAQ
Q: What is the highest average frame rate achievable with this combo?
A: The highest measured average is 236 FPS at 1920x1080 with Low settings. The Medium preset at 1080p still delivers 206 FPS average, while High settings produce 187 FPS at the same resolution.
Q: Can this combo maintain 60 FPS at 4K?
A: At 4K, the combo exceeds 60 FPS only on Low and Medium settings, with 78 FPS and 68 FPS averages respectively. High settings produce 62 FPS, which is barely above the threshold, while Ultra drops to 43 FPS, which is not playable for smooth gameplay.
Q: How does the RTX 5050's VRAM capacity affect performance in this game?
A: The 8 GB GDDR6 memory with a 128-bit bus provides 320.0 GB/s bandwidth. The data shows that at 4K Ultra, performance collapses to 43 FPS, indicating that the combination of memory capacity and bandwidth is insufficient for the highest preset at that resolution.
Q: What is the difference between Low and Ultra settings at 1440p?
A: At 2560x1440, Low settings produce 149 FPS average, while Ultra settings produce 83 FPS average. This 66 FPS difference represents a 44% reduction in frame rate, showing that the Ultra preset nearly halves performance compared to Low.
Q: Is the Core i5-14400F a bottleneck at any resolution?
A: The data suggests the CPU is not the primary limiter in most scenarios. The 10-core, 16-thread processor with a 4.70 GHz boost clock maintains high frame rates even at 1080p where CPU load is typically highest, with 236 FPS at Low settings indicating sufficient headroom.
Q: How does this combo rank among all tested configurations?
A: The combo ranks 1782nd out of 2947 tested combos in Ready Or Not, placing it in the 60th percentile of all tested pairings. This rank reflects the mid-tier positioning of both the CPU and GPU in the benchmark database.
CPU Role
The Intel Core i5-14400F is a 10-core, 16-thread processor based on the Raptor Lake architecture, built on Intel's 10 nm process node. Its base clock of 2.50 GHz and boost clock of 4.70 GHz provide the computational foundation for feeding the RTX 5050 with draw calls and game logic updates. The processor's 20 MB shared L3 cache and 1.25 MB per-core L2 cache help maintain low latency access to frequently used data, which is critical for the CPU-bound sections of Ready Or Not's tactical gameplay.
In synthetic benchmarks, the i5-14400F achieves a Cinebench R23 multi-core score of 21645 and a single-core score of 3055, with a Geekbench multi-core result of 11268 and single-core of 2058. These scores place the CPU at the 83rd percentile of all CPUs in the database, with an average benchmark score of 32279. Its nearest rivals include the AMD Ryzen 7 PRO 8840U with a delta of 0.1%, the Intel Core i9-11900 with a delta of 0.2%, and the AMD Ryzen 7 6800HS with a delta of -0.2%, showing that the i5-14400F sits in a tightly contested performance band.
The processor's 65 W TDP and unlocked memory support for both DDR4 and DDR5 provide flexibility for system builders, though the benchmark results in Ready Or Not suggest that the CPU is rarely the limiting factor. At 1080p Low, the combo achieves 236 FPS, which is well above what most displays can refresh, and even at 1080p Ultra, the 132 FPS result indicates the CPU can sustain high frame rates when the GPU is not overburdened. The PassMark multithread score of 25470 and single-thread score of 3701 further confirm that the processor has ample throughput for this game's simulation and AI workloads.
The i5-14400F's performance relative to its rivals shows a balanced profile. It trails the AMD Ryzen 7 PRO 8840U by only 0.1% in average benchmark score, while leading the Intel Core i7-12800H by 0.5%. This tight grouping means that in CPU-bound scenarios, the choice between these processors would yield nearly identical frame rates, and the measured FPS in Ready Or Not confirms that the GPU is the dominant performance factor at most settings.
Measured FPS Breakdown
At 1920x1080, the combo delivers its strongest results across all settings. Low settings produce an average of 236 FPS, Medium settings yield 206 FPS with a minimum of 175 FPS and maximum of 237 FPS, High settings achieve 187 FPS, and Ultra settings drop to 132 FPS. The variance at Medium settings shows a 62 FPS spread between minimum and maximum, suggesting that certain scenes or actions in Ready Or Not can cause noticeable frame rate fluctuations even at this resolution.
Moving to 2560x1440, the performance scales down proportionally. Low settings average 149 FPS, Medium settings average 130 FPS with a minimum of 111 FPS and maximum of 150 FPS, High settings average 118 FPS, and Ultra settings produce 83 FPS. The Medium preset at 1440p shows a tighter variance of 39 FPS between minimum and maximum, indicating more consistent frame pacing than at 1080p, likely because the GPU is more uniformly loaded.
At 3840x2160, the RTX 5050 begins to struggle with the higher pixel count. Low settings still manage a respectable 78 FPS average, Medium settings produce 68 FPS with a minimum of 58 FPS and maximum of 78 FPS, High settings average 62 FPS, and Ultra settings fall to 43 FPS. The 4K Medium result shows a 20 FPS variance, which is proportionally smaller than at lower resolutions, but the absolute minimum of 58 FPS indicates that the combo can dip below 60 FPS even on Medium settings.
The progression across resolutions shows a consistent pattern: Low settings are playable at all resolutions, Medium and High are playable up to 4K with some dips, and Ultra is only viable at 1080p and 1440p. The 4K Ultra result of 43 FPS is the only measured configuration that falls below the 60 FPS threshold, making it unsuitable for smooth tactical gameplay where quick reactions are essential.
GPU Role
The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture with the GB207 chip, fabricated on TSMC's 5 nm process with 16,900 million transistors on a 149 mm² die. The GPU features 2560 shading units, 80 texture mapping units, and 32 ROPs, with 20 RT cores and 80 tensor cores for ray tracing and AI-accelerated workloads. Its base clock of 2317 MHz and boost clock of 2572 MHz drive the 13.17 TFLOPS FP32 performance, while the 8 GB GDDR6 memory on a 128-bit bus provides 320.0 GB/s of bandwidth.
In synthetic benchmarks, the RTX 5050 achieves a PassMark G3D score of 17326 and a Geekbench OpenCL score of 90334, with a Vulkan score of 89381. The GPU ranks at the 66th percentile of all GPUs in the database, with an average benchmark score of 21035. Its nearest rivals include the AMD Radeon RX Vega M GL with a delta of -0.6%, the AMD Radeon HD 8970M with a delta of -1%, and the AMD Radeon RX 5600 XT with a delta of 1.6%, showing the RTX 5050 sits in a competitive mid-range segment.
The 8 GB VRAM capacity is a significant factor in Ready Or Not's performance at higher resolutions. The 4K Ultra result of 43 FPS suggests that the game's texture and geometry data exceeds the available memory, causing the GPU to thrash or reduce effective throughput. The 320.0 GB/s bandwidth also becomes a constraint at 4K, as the memory bus must move larger amounts of data for each frame compared to 1080p or 1440p.
The GPU's PCIe 5.0 x8 interface and support for DirectX 12 Ultimate, Vulkan 1.4, and OpenGL 4.6 ensure compatibility with modern rendering techniques. The 130 W TDP and dual-slot design with a single 8-pin power connector make it a manageable addition to most systems, with a suggested PSU of 300 W. The display outputs include one HDMI 2.1b and three DisplayPort 2.1b connectors, supporting high refresh rate monitors at 1080p and 1440p where this GPU performs best.
Settings Recommendations
Based on the measured FPS data, the Medium preset at 1920x1080 offers the best balance of visual quality and performance, delivering 206 FPS average with a minimum of 175 FPS. This configuration provides a substantial buffer above the 60 FPS threshold, ensuring smooth gameplay even during intense firefights or complex scene transitions. The 175 FPS minimum is particularly strong, indicating that the frame rate rarely dips below playable levels.
For users with 1440p displays, the High settings preset at 2560x1440 is the recommended choice, producing 118 FPS average. This provides excellent visual fidelity while maintaining frame rates well above 60 FPS. The Medium preset at 1440p delivers 130 FPS average with a minimum of 111 FPS, which could be preferred for users who prioritize higher frame rates over visual detail, especially in competitive scenarios.
At 4K, the Medium settings preset with 68 FPS average is the only viable option for smooth gameplay, though the 58 FPS minimum means there will be occasional dips below 60 FPS. The High preset at 4K produces 62 FPS average, which is borderline playable but risks noticeable stutters in demanding scenes. The Ultra preset at 4K should be avoided entirely, as the 43 FPS average is insufficient for a tactical shooter where reaction time matters.
The data suggests that the RTX 5050 is best utilized at 1080p or 1440p, where it can deliver high frame rates at Medium to High settings. At 1080p Ultra, the 132 FPS average is still very playable, but the visual improvement over High settings may not justify the 55 FPS reduction. The 1080p Low setting at 236 FPS is excessive for most displays, but could benefit users with 240 Hz monitors seeking maximum responsiveness.
How This Combo Ranks
The Intel Core i5-14400F and NVIDIA GeForce RTX 5050 combination ranks 1782nd out of 2947 tested combos in Ready Or Not, placing it in the 60th percentile of all tested configurations. This rank reflects the mid-tier positioning of both components: the CPU at the 83rd percentile of all CPUs and the GPU at the 66th percentile of all GPUs. The combo's performance is consistent with its component rankings, showing that neither part significantly overperforms or underperforms relative to its peers.
The CPU's nearest rivals include the AMD Ryzen 7 PRO 8840U, Intel Core i9-11900, AMD Ryzen 7 6800HS, and Intel Core i7-12800H, all within 0.5% of the i5-14400F's average benchmark score. This tight grouping indicates that the processor is not a differentiator in overall system performance, and the GPU choice has a greater impact on gaming results.
The GPU's nearest rivals include the AMD Radeon RX Vega M GL, AMD Radeon HD 8970M, AMD Radeon RX 5600 XT, and NVIDIA RTX A4000 Mobile, with deltas ranging from -1.6% to 1.6%. The RTX 5050's average benchmark score of 21035 puts it in a competitive position, though the RX 5600 XT leads by 1.6%, suggesting that some older mid-range cards can offer similar raw performance.
The combo rank of 1782 out of 2947 indicates that while this pairing is not at the top of the performance hierarchy, it provides a solid foundation for playing Ready Or Not at mainstream resolutions and settings. The measured FPS data confirms that the combo can handle 1080p at any settings preset and 1440p at up to High settings with excellent frame rates, with 4K being limited to Medium settings for acceptable performance. This positioning makes the combo well-suited for gamers who prioritize smooth gameplay at 1080p or 1440p over maximum visual fidelity at 4K.
Hardware Specifications
Intel Core i5-14400F
NVIDIA GeForce RTX 5050
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14400F + NVIDIA GeForce RTX 5050 in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.0 |
| 3840x2160 | Medium | 68.0 |
| 3840x2160 | High | 62.0 |
| 3840x2160 | Ultra | 43.0 |
| 2560x1440 | Low | 149.0 |
| 2560x1440 | Medium | 130.0 |
| 2560x1440 | High | 118.0 |
| 2560x1440 | Ultra | 83.0 |
| 1920x1080 | Low | 236.0 |
| 1920x1080 | Medium | 206.0 |
| 1920x1080 | High | 187.0 |
| 1920x1080 | Ultra | 132.0 |
Ready Or Not with ii5-14400F + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 5050 + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii5-14400F + RTX 5050
Explore FPS benchmarks for other games using this same hardware combination.