Ready Or Not

The AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4060 pairing delivers a remarkably smooth experience in Ready Or Not, with the data showing high average frame rates across all tested settings and resolutions. The measured results indicate that this combination is well-balanced, though the performance scaling patterns reveal distinct roles for the CPU and GPU depending on your graphical preset and display target.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 5600G brings six cores and twelve threads, running at a base clock of 3.90 GHz and boosting up to 4.40 GHz. This is a Zen 3 architecture part on the AMD Socket AM4 platform, and its benchmark standing places it at the 78th percentile among all CPUs. Its average benchmark score of 19983 puts it in a dead heat with its nearest rivals: it sits 0.2% ahead of the Intel Core i7-11600H and 0.3% ahead of the AMD Ryzen Threadripper PRO 5995WX, while trailing the Intel Core i7-11800H and AMD EPYC 7713P by 0.2%. For a tactical shooter like Ready Or Not, which relies on maintaining consistent frame pacing rather than raw multi-threaded throughput, this CPU is more than adequate.

The data shows that at 1080p with Low settings, the system hits 264.4 FPS average. That figure is so high that the CPU is almost certainly the primary limiter at that point, because the GPU has very little work to do. The 5600G’s single-thread performance, evidenced by a 3dmark_single_thread score of 872 and a passmark_single_thread score of 3177, is solid but not exceptional. In contrast, its multi-threaded capabilities, such as the cinebench_r23_multicore score of 16758, are sufficient to prevent bottlenecking in most game scenarios. When you look at the 4K Ultra result of 51.8 FPS, the CPU has plenty of headroom; the GPU is clearly the constraint there. The practical takeaway is that the 5600G will not hold back the RTX 4060 in Ready Or Not at higher resolutions, and it only becomes a factor at extremely high frame rates on low settings.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 is the engine driving the visuals here. It features 8 GB of GDDR6 memory on a 128-bit bus, delivering 272.0 GB/s of bandwidth. The GPU boosts to 2460 MHz, and its 3072 shading units handle the rasterization workload. The GPU sits at the 66th percentile among all graphics cards, with an average benchmark score of 23181. Its nearest rivals show a tight cluster: it is 0.6% ahead of the AMD Radeon 760M, 0.7% ahead of the Intel Arc B580, and 0.7% behind the AMD Radeon RX 6600M and NVIDIA GeForce GTX 780 Ti.

The VRAM capacity is the most important spec for Ready Or Not, which is a game that can be demanding on memory at higher settings. The data shows that at 4K Ultra, the average FPS drops to 51.8, which is the lowest measured result in the entire set. This suggests that the 8 GB frame buffer is being stressed heavily at that resolution and preset combination. At 1440p High, the card manages 131.6 FPS, which is a strong result. The card’s 15.11 TFLOPS of FP32 compute is sufficient to push high frame rates at 1440p, but the 4K Ultra result indicates that the GPU is hitting a wall when the settings demand maximum fidelity. The 2125 MHz memory clock, effective 17 Gbps, provides enough bandwidth to keep the card feeding data at 1440p and below without issue.

Settings Recommendations — which preset gives the best experience per the measured rows

Looking at the measured FPS rows, the sweet spot for this pairing is clearly the High preset at 1440p, which delivers 131.6 FPS. This is comfortably above the 60 FPS threshold for a smooth experience, and it provides a significant visual upgrade over Medium without the substantial performance cost of Ultra. At 1440p, the progression is: Low at 169.1 FPS, Medium at 147.7 FPS, High at 131.6 FPS, and Ultra at 96 FPS. The jump from High to Ultra costs 35.6 FPS, which is a 27% reduction for what is typically a marginal visual improvement in a tactical shooter where visibility matters more than particle effects.

If you are targeting 4K, the choice is more constrained. The High preset at 4K yields 69.2 FPS, which is playable, while Ultra drops to 51.8 FPS, which is below the ideal threshold for a fast-paced shooter. Medium at 4K gives 79.7 FPS, offering a better balance. For 1080p users, every preset is playable, with even Ultra hitting 147.9 FPS. The data suggests that High is the optimal preset across all resolutions because it maintains high frame rates without pushing the GPU into diminishing returns territory.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

*Q: What is the best resolution to play Ready Or Not with this CPU/GPU combo?*

A: The data shows that 1440p High provides the best balance of visual quality and performance, hitting 131.6 FPS. 1080p offers higher frame rates up to 264.4 FPS on Low, but 4K is only viable on Medium or High, with results ranging from 79.7 FPS to 69.2 FPS.

Q: How does the RTX 4060 compare to its nearest rival, the Intel Arc B580?

A: The RTX 4060 has an average benchmark score of 23181, which is 0.7% higher than the Arc B580’s 23021. In practice, this means the two cards perform nearly identically in synthetic benchmarks, with the 4060 holding a slight edge.

Q: Does the Ryzen 5 5600G bottleneck the RTX 4060 in this game?

A: At 1080p Low, the system reaches 264.4 FPS, which is high enough that the CPU is likely the limiting factor. However, at 1440p and 4K, the GPU becomes the primary constraint, as shown by the FPS scaling to 131.6 and 69.2 respectively on High settings.

*Q: Is the 8 GB VRAM on the RTX 4060 sufficient for Ready Or Not?*

A: The data indicates that 8 GB is enough for smooth play at 1440p and below, with 131.6 FPS on High at 1440p. At 4K Ultra, performance drops to 51.8 FPS, suggesting the VRAM capacity or bandwidth is stressed at that extreme setting.

Q: What is the frame rate difference between the Low and Ultra presets at 1080p?

A: The difference is 116.5 FPS, with Low hitting 264.4 FPS and Ultra dropping to 147.9 FPS. This represents a 44% reduction in performance when moving from the lowest to the highest visual quality preset.

Q: How does the CPU’s multi-threaded performance affect the game?

A: The 5600G’s cinebench_r23_multicore score of 16758 indicates strong multi-threaded capability. In Ready Or Not, this is sufficient to avoid CPU bottlenecks at typical gaming resolutions, as evidenced by the 131.6 FPS result at 1440p High.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern in how performance scales with resolution. Moving from 1080p to 1440p on the High preset, the FPS drops from 211.6 to 131.6, a reduction of 80 FPS or roughly 38%. Scaling further from 1440p to 4K on High, the FPS drops from 131.6 to 69.2, another 62.4 FPS reduction, about 47%. This consistent drop-off as resolution increases is a classic sign that the GPU is the dominant limiting component. The CPU has less impact on frame rates as you increase resolution because the workload shifts from geometry and draw calls to pixel shading and memory bandwidth.

The Low preset shows the same trend, but with a steeper relative drop. At 1080p Low, the system hits 264.4 FPS; at 1440p Low, it drops to 169.1 FPS; and at 4K Low, it falls to 87.6 FPS. The fact that the 4K Low result (87.6 FPS) is higher than the 4K Ultra result (51.8 FPS) confirms that the GPU’s shading units and VRAM are the bottleneck at high resolutions. If the CPU were the limiting factor, we would see a much flatter curve across resolutions. The data shows a strong GPU-bound scenario, which is good news for this pairing: the 5600G provides enough headroom to let the RTX 4060 stretch its legs at higher resolutions.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The full measured FPS table for Ready Or Not with the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4060 is as follows. At 1920x1080, the Low preset delivers 264.4 FPS, Medium delivers 231.6 FPS, High delivers 211.6 FPS, and Ultra delivers 147.9 FPS. The 1080p results are uniformly high, with even the most demanding preset clearing the 144 FPS mark, which is ideal for high-refresh-rate monitors.

At 2560x1440, the performance remains strong but shows more variation between presets. Low hits 169.1 FPS, Medium hits 147.7 FPS, High hits 131.6 FPS, and Ultra hits 96 FPS. The 1440p Ultra result is the first one to dip below the 100 FPS threshold, indicating that this is where the GPU starts to feel the load of the game’s heavier effects.

At 3840x2160, the results are more moderate. Low delivers 87.6 FPS, Medium delivers 79.7 FPS, High delivers 69.2 FPS, and Ultra delivers 51.8 FPS. The 4K Ultra result is the only measured value below 60 FPS, suggesting that 4K gaming with this combo requires turning settings down to Medium or High for a consistently smooth experience. Overall, the data shows that this pairing is capable of excellent performance at 1080p and 1440p, with 4K being playable but requiring compromises on visual quality. The combo ranks 991st out of 1748 tested combinations in this game, placing it in the upper half of all systems tested.