Archeage

# Archeage Performance Analysis: AMD Ryzen 5 5600G + NVIDIA GeForce RTX 4060

The data for Archeage on this AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4060 combination reveals a system that delivers playable frame rates at 1080p and 1440p, but struggles significantly at 4K Ultra settings. With measured average FPS ranging from 133 at 1080p Low to just 20 at 4K Ultra, the performance profile suggests a GPU that is increasingly stressed as resolution climbs, while the six-core CPU maintains a steady baseline. This combination ranks 2711 out of 3708 tested combos in this game, placing it in the lower-mid tier of all possible configurations for Archeage.

Resolution Scaling

The FPS drop from 1080p to 4K tells a clear story about which component limits performance in Archeage. At High settings, the system delivers 96 FPS at 1920x1080, drops to 60 FPS at 2560x1440, and falls to 32 FPS at 3840x2160. This represents a 33% reduction from 1080p to 1440p, and then a further 47% reduction from 1440p to 4K. The scaling pattern is not linear — the jump from 1440p to 4K is far more punishing than the jump from 1080p to 1440p, which indicates the GPU is approaching its memory bandwidth or fill-rate limits at higher resolutions.

Looking at Low settings reinforces this interpretation. The system achieves 133 FPS at 1080p, 84 FPS at 1440p, and 44 FPS at 4K. The percentage drops are 37% and 48% respectively, showing that even when graphical load is minimized, the 4K resolution still imposes a severe penalty. This consistency across settings suggests that the resolution scaling bottleneck is largely independent of the visual complexity — it is tied to the raw pixel output requirements. The RTX 4060's 128-bit memory bus and 272.0 GB/s bandwidth appear to be the constraining factors, as the pixel throughput demands at 4K exceed what this GPU can efficiently deliver.

The Ultra settings data provides the most dramatic illustration of this scaling problem. At 1080p Ultra, the system manages 61 FPS. At 1440p Ultra, it falls to 39 FPS. At 4K Ultra, it collapses to 20 FPS. The 1440p-to-4K drop here is 49%, nearly identical to the other settings, but the absolute values are so low that 4K Ultra becomes essentially unplayable. The data implies that while the CPU (with its 3.90 GHz base and 4.40 GHz boost clocks) can keep up with the frame pacing at lower resolutions, the GPU's rendering pipeline simply cannot sustain the increased pixel count at 4K without significant frame rate degradation.

GPU Role

The NVIDIA GeForce RTX 4060 brings 8 GB of GDDR6 memory on a 128-bit bus, with memory clocks rated at 2125 MHz (17 Gbps effective) and a bandwidth of 272.0 GB/s. The GPU's boost clock reaches 2460 MHz, and it contains 3072 shading units. These specifications place the card at the 61st percentile among all GPUs in the database, with an average benchmark score of 17639. The nearest rivals in benchmark performance are the AMD Radeon HD 7790 (score 17666, deltaPct -0.2), the AMD Radeon 780M (score 17588, deltaPct 0.3), and the AMD Radeon Pro 560 (score 17551, deltaPct 0.5).

In Archeage specifically, the GPU's role becomes more pronounced at higher resolutions and settings. The measured data shows that at 1080p, the GPU has enough headroom to push frame rates into triple digits on Low settings (133 FPS) and maintain nearly 100 FPS on High (96 FPS). However, the Ultra preset at 1080p drops to 61 FPS, suggesting that the additional visual effects and texture quality in Ultra mode consume significant GPU resources. The 8 GB VRAM capacity is likely sufficient for 1080p and 1440p in this 2014 MMORPG, but the combination of 4K resolution and Ultra settings may be pushing against memory capacity limits, contributing to the 20 FPS result.

The GPU's performance characteristics explain the resolution scaling pattern observed. The 128-bit memory bus, while paired with fast GDDR6 memory, limits the total bandwidth available for texture streaming and framebuffer operations at high resolutions. The pixel rate of 118.1 GPixel/s and texture rate of 236.2 GTexel/s are respectable for 1080p gaming but become strained at 4K. The FP32 throughput of 15.11 TFLOPS provides adequate compute for the game's shader complexity, yet the data shows that this compute power is not the limiting factor — the memory subsystem is.

CPU Role

The AMD Ryzen 5 5600G features 6 cores and 12 threads based on the Zen 3 architecture (Cezanne codename), with a base clock of 3.90 GHz and boost clock of 4.40 GHz. It has 16 MB of L3 cache and supports DDR4 memory with a dual-channel bus providing 51.2 GB/s bandwidth. The CPU sits at the 74th percentile among all CPUs, with an average benchmark score of 21088. Its nearest rivals include the Intel Core i3-1220P (score 21066, deltaPct 0.1), Intel Core Ultra 7 256V (score 21112, deltaPct -0.1), and AMD Ryzen 5 7530U (score 21133, deltaPct -0.2).

In the context of Archeage, the CPU's multi-threading capabilities appear sufficient to avoid becoming the primary bottleneck. The Cinebench R23 multicore score of 10551 and single-core score of 1409 indicate solid processing power for an MMORPG that may have significant server-side and client-side simulation work. The Passmark multithread score of 19717 and single-thread score of 3177 further confirm that the CPU can handle the game's logic without holding back the GPU at most settings.

The evidence for CPU adequacy comes from the scaling behavior. If the CPU were the limiting factor, we would expect frame rates to remain relatively flat across resolutions. Instead, the measured FPS drops consistently as resolution increases, which is the signature of a GPU-bound scenario. Even at 1080p Low (133 FPS), the CPU is not maxed out — it has additional headroom to feed the GPU if the GPU could render faster. The CPU's 6 cores and 12 threads are likely underutilized in Archeage, as MMORPGs of this era typically rely more heavily on single-thread performance, where the 5600G's boost clock of 4.40 GHz provides adequate performance.

The CPU's integrated graphics (Radeon Vega 7) are irrelevant when the discrete RTX 4060 is installed, but the CPU's PCIe Gen 3 interface (16 lanes) is worth noting. The RTX 4060 uses a PCIe 4.0 x8 bus interface, which when connected to a Gen 3 CPU slot operates at Gen 3 speeds. This could theoretically limit bandwidth, but the measured data suggests it does not create a meaningful performance penalty in Archeage, as the GPU remains the bottleneck at higher resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. At 1920x1080, the High preset delivers 96 FPS, which is comfortably above the 60 FPS threshold for smooth gameplay in an MMORPG. The Medium preset at 101 FPS offers a slight improvement over High, while the Low preset at 133 FPS provides the highest frame rates but sacrifices visual quality. The Ultra preset at 61 FPS is playable but sits close to the edge of what many players would consider acceptable for a game with frequent text and UI elements.

At 2560x1440, the choices become more constrained. High settings yield 60 FPS, which is exactly at the standard monitor refresh rate and provides a smooth experience. Medium settings at 64 FPS offer a marginal improvement, while Low at 84 FPS gives more headroom for demanding scenes. Ultra drops to 39 FPS, which is below the smoothness threshold and not recommended for gameplay. The data suggests that High or Medium at 1440p provides the best balance of visual fidelity and performance.

At 3840x2160, none of the measured settings achieve 60 FPS. High delivers 32 FPS, Medium 33 FPS, Low 44 FPS, and Ultra 20 FPS. The Low preset at 44 FPS is the most playable option, but it still falls short of smooth gameplay standards. For 4K, players would need to accept significant visual compromises or consider lowering resolution scaling options if available. The data indicates that this combination is not well-suited for 4K gaming in Archeage, and 1440p should be considered the practical ceiling for this system.

FAQ

Q: What is the best resolution for this CPU/GPU combination in Archeage?

A: The measured data shows 2560x1440 as the optimal resolution, with High settings achieving 60 FPS and Medium at 64 FPS. At 1920x1080, frame rates are higher but the visual improvement from 1440p may be worth the trade-off for many players.

Q: Can this system handle Ultra settings in Archeage?

A: At 1080p, Ultra settings deliver 61 FPS, which is playable. However, at 1440p Ultra drops to 39 FPS, and at 4K Ultra it falls to 20 FPS. Ultra is only recommended at 1080p for this combination.

Q: How does the RTX 4060 compare to its nearest GPU rivals?

A: The RTX 4060 has an average benchmark score of 17639, placing it at the 61st percentile. It is 0.2% slower than the AMD Radeon HD 7790 (score 17666) and 0.3% faster than the AMD Radeon 780M (score 17588), indicating near-parity with these competitors.

Q: Is the Ryzen 5 5600G strong enough for Archeage?

A: The CPU's benchmark scores suggest it is more than adequate. It ranks at the 74th percentile overall, and its Cinebench R23 multicore score of 10551 and single-core score of 1409 provide sufficient processing power for an MMORPG. The resolution scaling data confirms the GPU is the primary bottleneck.

Q: What frame rate can I expect at 1080p Medium settings?

A: The measured data shows 101 FPS average at 1080p Medium, with a minimum of 86 FPS and maximum of 116 FPS. This provides a smooth experience with minimal frame drops.

Q: Why is 4K performance so poor with this setup?

A: The RTX 4060's 128-bit memory bus and 272.0 GB/s bandwidth are insufficient for the pixel throughput demands of 4K rendering. Even at Low settings, 4K only achieves 44 FPS, while Ultra drops to 20 FPS, indicating the GPU's memory subsystem is the limiting factor.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest performance across all settings. Low settings achieve 133 FPS average, providing the highest measured frame rate in the entire dataset. Medium settings produce 101 FPS average with a minimum of 86 FPS and maximum of 116 FPS, showing good frame time consistency. High settings reach 96 FPS average, while Ultra settings drop to 61 FPS. The 1080p results demonstrate that the RTX 4060 has ample performance headroom for this resolution, with even the most demanding preset maintaining playable frame rates.

At 2560x1440, performance remains respectable but shows clear signs of GPU strain. Low settings deliver 84 FPS, providing a smooth experience for competitive play. Medium settings achieve 64 FPS average with a range of 54 to 73 FPS, indicating some frame pacing variability. High settings reach 60 FPS exactly, which is the minimum threshold for standard 60 Hz displays. Ultra settings fall to 39 FPS, making this preset unsuitable for serious gameplay. The 1440p results indicate that this combination can handle the resolution well at lower settings, but Ultra is not viable.

At 3840x2160, all settings struggle to maintain playable frame rates. Low settings deliver 44 FPS, which is the only 4K result above 40 FPS. Medium settings achieve 33 FPS average with a range of 28 to 38 FPS, showing significant frame time spikes. High settings reach 32 FPS, while Ultra drops to just 20 FPS. The 4K results clearly show that this GPU is not designed for 4K gaming in Archeage, and players should avoid this resolution unless they are willing to accept sub-30 FPS performance.

How This Combo Ranks

The AMD Ryzen 5 5600G + NVIDIA GeForce RTX 4060 combination ranks 2711 out of 3708 tested combos in Archeage, placing it in the 27th percentile of all configurations. This ranking reflects the system's performance relative to other CPU and GPU pairings that have been measured in this game. The relatively low rank is somewhat surprising given the individual component performance — the CPU sits at the 74th percentile and the GPU at the 61st percentile among their respective categories.

The ranking suggests that Archeage may favor combinations with different characteristics than what this setup offers. The game's 2014 release date and MMORPG genre may mean it responds better to CPUs with higher single-thread performance or GPUs with different memory architectures. The RTX 4060's modern Ada Lovelace architecture, while powerful in compute benchmarks, may not translate to proportionate gains in this older title. Additionally, the CPU's integrated graphics and the fact that it shares thermal and power characteristics with the discrete GPU may influence overall system performance in ways that are not captured by individual component benchmarks.

The measured FPS data provides context for this ranking. While the system achieves 133 FPS at 1080p Low and 96 FPS at 1080p High, these results are not exceptional when compared to other combinations in the database. The 4K performance, with its dramatic drop to 20 FPS at Ultra settings, likely drags down the overall ranking. Players considering this combination for Archeage should focus on 1440p gaming, where the system demonstrates its strongest performance relative to its ranking.