Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
121
excellent

This combination delivers exceptional performance with an average of 121 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 46 65 91
1440p QHD 83 87 124 175
1080p Full HD 132 138 196 277

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 91
3840x2160 Medium 65
3840x2160 High 46
3840x2160 Ultra 43
2560x1440 Low 175
2560x1440 Medium 124
2560x1440 High 87
2560x1440 Ultra 83
1920x1080 Low 277
1920x1080 Medium 196
1920x1080 High 138
1920x1080 Ultra 132

Pc Building Simulator with Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

Pc Building Simulator is a simulation title where the primary workload is managing menus, 3D part previews, and system-building interactions, making frame pacing and raw throughput less critical than in fast-paced shooters. The combination of the 24-core Intel Core Ultra 9 290K Plus and the 8GB NVIDIA GeForce RTX 3060 Ti produces a wide range of performance depending on resolution and quality settings, with the data revealing a system that is heavily GPU-bound at higher resolutions but capable of extreme frame rates at 1080p. The measured results show a clear hierarchy where the Low preset at 1080p delivers over 277 FPS average, while the Ultra preset at 4K drops to just 43 FPS, indicating that users should prioritize settings based on their display's native resolution and refresh rate.

Resolution Scaling

The frame rate data shows a predictable but steep decline as resolution increases, confirming that the RTX 3060 Ti is the primary limiting factor in this pairing. At 1080p High, the system averages 138 FPS, which drops to 87 FPS at 1440p (a 37% reduction) and further to 46 FPS at 4K (a 67% reduction from the 1080p figure). This scaling pattern is characteristic of a GPU that is saturated by pixel throughput, with the CPU's 5.80 GHz boost clock and 36 MB of shared L3 cache providing ample headroom to feed frames at lower resolutions.

The gap between Low and Ultra settings widens dramatically at higher resolutions, which further emphasizes the GPU bottleneck. At 1080p, the difference between Low (277 FPS) and Ultra (132 FPS) is 145 FPS, while at 4K, the same settings gap is only 48 FPS (91 vs 43). This compression at 4K indicates that even the Low preset is pushing the GPU to its limits, and the Ultra preset is simply not viable for smooth gameplay at that resolution. The data suggests that for 4K displays, users should expect to use Medium settings at best, which yields 65 FPS average with a minimum of 55 FPS.

The transition from 1440p to 4K is particularly punishing across all settings. For instance, Medium settings at 1440p deliver 124 FPS, but this falls to 65 FPS at 4K — a 48% drop. Similarly, High settings at 1440p produce 87 FPS, which nearly halves to 46 FPS at 4K. This steep degradation is typical for a GPU with 448.0 GB/s memory bandwidth and 8 GB of GDDR6 VRAM, as the pixel fill rate requirements at 4K (3840x2160) are over double those at 1440p (2560x1440). Benchmark results indicate that the RTX 3060 Ti, with its 133.2 GPixel/s pixel rate, is simply not designed for 4K gaming at high quality presets.

GPU Role

The RTX 3060 Ti's specifications directly explain the measured performance patterns in this simulation title. With 8 GB of GDDR6 memory on a 256-bit bus, the GPU offers 448.0 GB/s of bandwidth, which is sufficient for 1080p and 1440p gaming but becomes a constraint at 4K when textures and frame buffers demand more capacity. The GPU's boost clock of 1665 MHz and 4864 shading units contribute to its 16.20 TFLOPS FP32 performance, which translates to the 277 FPS average seen at 1080p Low — a figure that suggests the CPU is not holding back the graphics card in lighter workloads.

The GPU's 59th percentile ranking among all GPUs places it in the mid-range tier, and its nearest rival, the AMD Radeon RX 9060, scores 0.7% lower on average. This competitive positioning is reflected in the 4K Medium result of 65 FPS, which is playable but not ideal for fast-paced interactions. The 38 RT cores and 152 tensor cores are underutilized in a simulation game like Pc Building Simulator, which does not typically employ ray tracing or DLSS, so the raw rasterization performance of the 80 ROPs is what drives the frame rates observed.

The memory clock of 1750 MHz (14 Gbps effective) is a key factor in the 4K scaling. At 4K Ultra, the system only manages 43 FPS average, which is below the 60 FPS threshold most builders consider smooth. The data shows that the GPU's 8 GB VRAM capacity is likely being exceeded at 4K Ultra, causing texture swapping that contributes to the low average. In contrast, the 1440p Ultra result of 83 FPS shows that the GPU can handle high settings when pixel count is more moderate. The 200 W TDP and dual-slot design are consistent with a mid-range card that performs well at 1440p but struggles at 4K, which is exactly what the measured FPS breakdown confirms.

FAQ

Q: Is this combo capable of 4K gaming in Pc Building Simulator?

A: The data shows 4K performance ranges from 43 FPS at Ultra to 91 FPS at Low. Medium settings at 4K yield 65 FPS average with a 55 FPS minimum, which is the only preset that approaches a smooth experience, but it is not ideal.

Q: What is the best resolution for this CPU-GPU pairing?

A: 1440p is the sweet spot. High settings at 1440p deliver 87 FPS, while Medium reaches 124 FPS. This resolution balances visual quality with the GPU's 448.0 GB/s bandwidth, avoiding the steep performance cliff seen at 4K.

Q: How does the RTX 3060 Ti compare to its closest rivals in this context?

A: The GPU's average benchmark score of 16129 puts it 0.7% higher than the AMD Radeon RX 9060 and 1.4% lower than both the Radeon Pro 5600M and RX 5700 XT. These differences are marginal, so performance in this game would be nearly identical across these cards.

Q: Does the Intel Core Ultra 9 290K Plus bottleneck the RTX 3060 Ti at 1080p?

A: No. At 1080p Low, the combo achieves 277 FPS average, and at 1080p Ultra it still hits 132 FPS. These figures indicate the CPU, with its 5.80 GHz boost clock and 96th percentile ranking, is not a limiting factor in this title.

Q: What frame rates can I expect at 1080p with Medium settings?

A: The measured data shows 196 FPS average, with a minimum of 167 FPS and a maximum of 225 FPS. This is well above the refresh rate of most monitors, making it an excellent choice for high-refresh-rate displays.

Q: Why does the 4K Ultra preset perform so poorly at 43 FPS?

A: The 8 GB VRAM and 133.2 GPixel/s pixel rate are insufficient for 3840x2160 at Ultra quality. The GPU's 59th percentile ranking and 16.20 TFLOPS FP32 output are simply not enough to maintain smooth frame rates when pixel count and texture detail are maxed out.

How This Combo Ranks

Among 3002 tested combos for Pc Building Simulator, this pairing of the Intel Core Ultra 9 290K Plus and RTX 3060 Ti ranks 1440th, placing it just below the median of all configurations. This mid-pack ranking is notable because the CPU alone scores in the 96th percentile among all processors, while the GPU sits in the 59th percentile. The disparity between the two components' relative strength explains why the combo does not crack the top half — the graphics card is the limiting factor in this simulation-heavy title.

The CPU's nearest rival, the Intel Core Ultra 9 285K, has an average benchmark score just 0.2% lower, making this processor essentially equivalent in performance. The AMD EPYC 7F72 scores 1.3% higher, while the EPYC 4584PX and EPYC 9135 score 1.1% and 1.2% lower, respectively. These margins are tiny, confirming that the CPU is not the reason for the combo's 1440th rank. Instead, the GPU's position relative to its rivals — 0.7% above the RX 9060 and 1.4% below the RX 5700 XT — keeps this combo in the lower half of the rankings.

The rank of 1440 out of 3002 means that roughly half of all tested combinations deliver better frame rates in this game. Given that Pc Building Simulator is not graphically demanding compared to AAA shooters, this rank suggests that the RTX 3060 Ti is the weak link. Users with this combo should not expect top-tier performance, but the 1440p results show it is capable of a satisfying experience if settings are adjusted appropriately. The data indicates that upgrading the GPU would yield a more significant improvement than swapping the CPU, which already outperforms its direct rivals by a slim margin.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results across all presets. Low settings produce an average of 277 FPS, which drops to 196 FPS at Medium (with a 167 FPS minimum and 225 FPS maximum), 138 FPS at High, and 132 FPS at Ultra. The small gap between High and Ultra (6 FPS) suggests diminishing returns at this resolution, where the GPU is not fully stressed and the CPU's 24 threads can maintain high frame pacing.

Moving to 2560x1440, performance scales down but remains playable. Low settings average 175 FPS, Medium averages 124 FPS (105 FPS minimum, 142 FPS maximum), High averages 87 FPS, and Ultra averages 83 FPS. The 4 FPS difference between High and Ultra at 1440p is even smaller than at 1080p, indicating that the GPU is beginning to hit its limits but still has enough headroom to handle both presets similarly.

At 3840x2160, the breakdown shows a significant step down. Low settings average 91 FPS, Medium averages 65 FPS (55 FPS minimum, 74 FPS maximum), High averages 46 FPS, and Ultra averages 43 FPS. The difference between High and Ultra at 4K is only 3 FPS, which suggests that both presets are equally taxing for the GPU. The Medium preset is the only 4K option that maintains an average above 60 FPS, though its 55 FPS minimum may cause noticeable stutters in scenes with many 3D objects.

The data shows that the RTX 3060 Ti's 8 GB VRAM is likely a factor at 4K, as the gap between Low and Medium (26 FPS) is proportionally smaller than the gap between Medium and High (19 FPS). This pattern indicates that texture loading at High and Ultra presets is pushing memory capacity, resulting in compressed performance differences. For users with 1080p or 1440p monitors, the measured FPS figures are consistently above 80 FPS even at Ultra, making this combo viable for those resolutions without compromise.

Settings Recommendations

For 1080p displays, the Ultra preset at 132 FPS is the best choice, as it provides the highest visual fidelity while still delivering frame rates that exceed most monitors' refresh rates. The 6 FPS difference between Ultra and High is negligible, so there is no reason to drop below Ultra at this resolution. If using a 240 Hz or higher refresh rate monitor, the Medium preset at 196 FPS is a better fit, as it offers a significant frame rate boost with only a modest reduction in visual quality.

At 1440p, the Ultra preset at 83 FPS is the recommended starting point for users with 60 Hz or 75 Hz displays. For those with 144 Hz monitors, the High preset at 87 FPS is nearly identical in performance, so either works. However, the Medium preset at 124 FPS is the optimal choice for competitive play or high-refresh-rate panels, as it provides a 41% frame rate increase over Ultra while maintaining smooth motion. The Low preset at 175 FPS is overkill for most users, but it is useful for benchmarking or if the game's physics simulation becomes demanding.

For 4K displays, the Medium preset at 65 FPS is the only viable option, but users should be aware that the 55 FPS minimum may cause occasional hitches. Dropping to Low at 91 FPS is a safer choice for consistent performance, though it sacrifices visual detail. The High and Ultra presets at 46 FPS and 43 FPS respectively are not recommended, as they fall below the 60 FPS threshold and will feel sluggish in a game that involves frequent menu navigation and 3D part manipulation.

In summary, the best experience per the measured rows depends on the display. At 1080p, use Ultra for maximum quality or Medium for high refresh rates. At 1440p, use Medium for smooth gameplay or Ultra for visual fidelity. At 4K, use Low for playable frame rates or Medium if the minimum FPS is acceptable. The data clearly shows that this combo is best suited for 1080p and 1440p gaming, with 4K reserved for users who prioritize resolution over smoothness.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 3060 Ti in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 91.0
3840x2160 Medium 65.0
3840x2160 High 46.0
3840x2160 Ultra 43.0
2560x1440 Low 175.0
2560x1440 Medium 124.0
2560x1440 High 87.0
2560x1440 Ultra 83.0
1920x1080 Low 277.0
1920x1080 Medium 196.0
1920x1080 High 138.0
1920x1080 Ultra 132.0

Pc Building Simulator with iUltra 9 290K Plus + Other GPUs

See how Pc Building Simulator performs with the same CPU but different graphics cards.

Pc Building Simulator with RTX 3060 Ti + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.