Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
103
good

This combination provides smooth gameplay with an average of 103 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 37 39 55 78
1440p QHD 71 74 105 149
1080p Full HD 112 118 167 236

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 78
3840x2160 Medium 55
3840x2160 High 39
3840x2160 Ultra 37
2560x1440 Low 149
2560x1440 Medium 105
2560x1440 High 74
2560x1440 Ultra 71
1920x1080 Low 236
1920x1080 Medium 167
1920x1080 High 118
1920x1080 Ultra 112

Pc Building Simulator with Intel Core Ultra 9 290K Plus + AMD Radeon RX 7600 XT, In-Depth Analysis

Intel Core Ultra 9 290K Plus and the AMD Radeon RX 7600 XT form a pairing that is heavily skewed toward processor throughput, which is exactly what Pc Building Simulator demands. This is a simulation title where the CPU carries the bulk of the workload, and the data confirms that the 290K Plus is a dominant force in this specific context, while the GPU plays a supporting role that becomes more relevant only at extreme resolutions.

CPU Role

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor built on the Arrow Lake Refresh architecture using a 3 nm process from TSMC. It operates with a base clock of 3.70 GHz and a boost clock of 5.80 GHz, with a 125 W TDP. This is a high-end desktop part, and its benchmark results place it in the 96th percentile of all CPUs tested. The data shows a Cinebench R23 multi-core score of 51,731 and a single-core score of 7,303, while the PassMark multi-thread score reaches 60,860. These numbers indicate exceptional raw compute capability, which is critical for a game like Pc Building Simulator that simulates component interactions, thermal dynamics, and system assembly logic in real time.

For this game, the CPU’s role is dominant. The measured FPS data shows that at 1080p Low settings, the combo achieves 236 FPS, which is a massive 118% higher than the 1080p Ultra result of 112 FPS. This scaling pattern is a classic indicator of a CPU-bound scenario at lower settings, where the GPU is not the limiting factor. The 290K Plus’s 24 cores and 5.80 GHz boost clock provide the headroom needed to maintain high frame rates even when the graphical load is reduced. The L3 cache is 36 MB shared, and the L2 cache is 3 MB per core, which helps with the frequent data access patterns typical of simulation games that track many simultaneous objects and states.

Comparing to its nearest rivals, the 290K Plus has an average benchmark score of 84,003. This is 0.2% ahead of the Intel Core Ultra 9 285K (83,807), and 1.1% ahead of the AMD EPYC 4584PX (83,090). It also leads the AMD EPYC 9135 (82,980) by 1.2%. The only rival that edges it out is the AMD EPYC 7F72 with a score of 85,072, which is 1.3% higher. These are marginal differences, suggesting that within this performance tier, the 290K Plus is competitive but not the absolute peak. However, for Pc Building Simulator specifically, the combination of high single-thread performance (Cinebench R20 single-core score of 3,067) and massive multi-thread capability (PassMark multi-thread score of 60,860) makes it well-suited for the game’s simulation loop, which often relies on a few primary threads for game logic and can leverage additional cores for background physics or component state updates.

The PassMark data compression score of 698,346 and floating point math score of 214,760 further indicate that this CPU excels at the type of repetitive, parallelizable calculations that simulation games generate. The fact that the 290K Plus is a 24-thread part without hyper-threading (24 cores, 24 threads) means each core is a physical core, which can sometimes provide more consistent performance in latency-sensitive workloads than a design with logical threads. The data shows this is a capable processor for this title, and the bottleneck analysis from the FPS curves points to the CPU being the primary driver of performance at 1080p and 1440p, while the GPU begins to take over at 4K.

GPU Role

The AMD Radeon RX 7600 XT is a RDNA 3.0 architecture GPU based on the Navi 33 chip, built on a 6 nm process. It has a base clock of 1980 MHz and a boost clock of 2755 MHz, with a game clock of 2470 MHz. The memory configuration is 16 GB of GDDR6 on a 128-bit bus, yielding a bandwidth of 288.0 GB/s. This is a mid-range card that sits in the 60th percentile of all GPUs, with an average benchmark score of 17,083. Its nearest rival, the NVIDIA GeForce RTX 3070, scores 17,208, which is 0.7% higher, while the NVIDIA GeForce GTX 690 (17,037) is 0.3% lower. The AMD Radeon HD 7970M (17,019) is 0.4% lower, and the NVIDIA Tesla M4 (16,932) is 0.9% lower. These are close scores, indicating the 7600 XT is in a tight performance band.

In Pc Building Simulator, the GPU’s role is secondary but not negligible. The measured FPS data shows that at 4K Ultra, the combo drops to 37 FPS, which is the lowest result across all tested settings. This is a significant drop from the 4K Medium result of 55 FPS, and it highlights that the 16 GB VRAM and 288.0 GB/s bandwidth are not sufficient to maintain high frame rates at 4K with maximum graphical fidelity. The GPU’s PassMark G3D score is 17,132, and its DirectX 12 score is 65, which are modest figures. The DirectX 11 score of 167 is higher, suggesting that the card may perform relatively better in older APIs, but the game’s modern rendering paths at Ultra settings stress the card’s 64 ROPs and 128 TMUs.

The 7600 XT’s 22.57 TFLOPS of FP32 performance is decent for 1080p and 1440p gaming, but the data shows that at 1440p Ultra, the FPS drops to 71, while at 1440p High it is 74, and at 1440p Medium it is 105. This indicates that the GPU is the limiting factor at 1440p Ultra, as the CPU is likely still capable of more. At 1080p, the GPU is less of a constraint, with 1080p Ultra hitting 112 FPS and 1080p High reaching 118 FPS. The gap between 1080p Medium (167 FPS) and 1080p Low (236 FPS) is substantial, showing that the GPU’s load decreases significantly at lower settings, allowing the CPU to drive frame rates much higher.

The GPU’s 16 GB VRAM is a notable asset for a simulation game that may load many textures for different PC components, but the 128-bit memory bus and 288.0 GB/s bandwidth limit its ability to push high resolutions efficiently. The data suggests that for 4K gaming, the 7600 XT is not ideal, as even Medium settings yield only 55 FPS on average. The card’s PCIe 4.0 x8 interface is also a consideration, though it does not appear to be a bottleneck in the measured results.

FAQ

Q: Is the Intel Core Ultra 9 290K Plus or the AMD Radeon RX 7600 XT more important for performance in Pc Building Simulator?

A: The CPU is more important. The data shows that at 1080p Low, the combo achieves 236 FPS, while at 4K Ultra it drops to 37 FPS. The CPU’s 96th percentile ranking versus the GPU’s 60th percentile suggests the processor is the primary driver, with the GPU becoming the bottleneck at 4K.

Q: What is the best resolution to play this game with this combo for a balance of quality and speed?

A: 1440p Medium provides a solid experience with 105 FPS average and a minimum of 90 FPS. This is well above the 4K Medium result of 55 FPS and maintains high fidelity. 1080p High at 118 FPS is also strong, but 1440p Medium offers more detail without a major FPS penalty.

Q: How does the 290K Plus compare to the Intel Core Ultra 9 285K in overall CPU benchmarks?

A: The 290K Plus has an average benchmark score of 84,003, which is 0.2% higher than the 285K’s 83,807. In practical terms, this is a negligible difference, meaning the two CPUs are nearly identical in performance for this game.

Q: Can the RX 7600 XT handle 4K gaming in this title?

A: Only at lower settings. The data shows 4K Low yields 78 FPS and 4K Medium yields 55 FPS, but 4K High and Ultra drop to 39 FPS and 37 FPS, respectively. For a consistent 60 FPS experience, 4K Medium is borderline, and 4K Low is required for comfortable frame rates.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1080p Low, the combo averages 236 FPS, while at 1080p Ultra it averages 112 FPS. This is a 124 FPS difference, which is a 110% improvement from Ultra to Low, demonstrating the significant impact of graphical settings on the GPU load.

Q: How does the GPU’s nearest rival, the NVIDIA GeForce RTX 3070, compare in benchmark scores?

A: The RTX 3070 has an average score of 17,208, which is 0.7% higher than the RX 7600 XT’s 17,083. This indicates they are very close in raw performance, though the 7600 XT has more VRAM (16 GB vs. the RTX 3070’s unspecified amount in the data).

How This Combo Ranks

The combination of the Intel Core Ultra 9 290K Plus and AMD Radeon RX 7600 XT ranks 1,877 out of 3,002 tested combos in Pc Building Simulator. This places it in the 37.5th percentile of all system pairings, which is a surprisingly low rank given the CPU’s high performance. The reason is clear from the measured FPS data: the GPU is not powerful enough to fully utilize the CPU’s capabilities at higher resolutions. At 1080p, the combo performs admirably, with 1080p Low hitting 236 FPS, but at 4K, the system falls to 37 FPS at Ultra settings. This large variance in performance across resolutions drags down the overall ranking, as the combo is not well-balanced for a game that can be scaled up to 4K.

The rank of 1,877 suggests that many other combinations achieve higher average frame rates across the tested settings, likely because they pair a more balanced CPU-GPU setup. The 290K Plus is overkill for the 7600 XT in this game, as the GPU becomes the limiting factor at 1440p and 4K. For example, at 1440p Ultra, the FPS is 71, which is only 2.5% higher than 1440p High (74 FPS), indicating that the GPU is maxed out and the CPU’s extra headroom is not being used. In contrast, at 1080p Low, the FPS jumps to 236, showing that when the GPU load is light, the CPU can push much higher frame rates. This imbalance is why the combo ranks in the lower half of all tested systems, despite the CPU being in the 96th percentile.

The data indicates that this pairing is best suited for 1080p gaming with high refresh rates, where the CPU can shine and the GPU can keep up. At 1440p, it is playable but not exceptional, and at 4K, it struggles. For users who prioritize simulation depth over graphical fidelity, this combo works well, but for those seeking a balanced 1440p or 4K experience, other combinations would rank higher.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. For a 60 FPS target, the best experience is at 1440p Medium, which delivers 105 FPS average with a minimum of 90 FPS. This provides a smooth experience with decent visual quality. At 1080p, the data shows that High settings at 118 FPS is the best balance, as it offers high visual fidelity without sacrificing performance, and it stays well above the 60 FPS threshold. Ultra at 1080p drops to 112 FPS, which is still playable but offers diminishing returns for the extra graphical load.

For users with a 4K monitor, the data suggests that Low settings at 78 FPS is the only viable option for a smooth experience, as Medium drops to 55 FPS and High/Ultra fall below 40 FPS. While 4K Low is not visually ideal, it is the only way to maintain a playable frame rate with this GPU. At 1440p, if a higher visual quality is preferred, High at 74 FPS is acceptable, but Medium at 105 FPS is significantly better for responsiveness. The Ultra preset at 1440p (71 FPS) offers minimal improvement over High (74 FPS) and is not worth the performance cost.

The data also shows that the Medium preset at 1080p (167 FPS) is the sweet spot for high refresh rate monitors, as it is more than double the 60 FPS target and provides a noticeable boost over High. For competitive play or simulation speed, Low at 1080p (236 FPS) is the best, but it sacrifices visual detail. Overall, the recommended preset is Medium at 1080p or 1440p, depending on the monitor’s native resolution, as it offers the best combination of frame rate and visual quality across the measured data.

Measured FPS Breakdown

The measured FPS data provides a clear picture of how this combo scales across resolutions and settings.

At 3840x2160 (4K), the results are as follows:

  • Low: 78 FPS average. This is the only 4K setting that approaches a smooth experience, though it is still below the 1440p results.
  • Medium: 55 FPS average, with a minimum of 47 FPS and a maximum of 63 FPS. This is borderline playable, but frame drops below 50 FPS are noticeable.
  • High: 39 FPS average. This is not smooth and indicates the GPU is heavily taxed.
  • Ultra: 37 FPS average. This is the lowest result in the entire dataset and is not recommended for play.

At 2560x1440 (1440p), the results are:

  • Low: 149 FPS average. This is excellent and shows that the CPU can drive high frame rates when the GPU load is low.
  • Medium: 105 FPS average, with a minimum of 90 FPS and a maximum of 121 FPS. This is the ideal 1440p setting for a smooth experience.
  • High: 74 FPS average. This is playable but not as fluid as Medium.
  • Ultra: 71 FPS average. This is nearly identical to High, showing that the GPU is the limiting factor at this resolution.

At 1920x1080 (1080p), the results are:

  • Low: 236 FPS average. This is the highest recorded frame rate and demonstrates the CPU’s full potential.
  • Medium: 167 FPS average, with a minimum of 142 FPS and a maximum of 192 FPS. This is excellent for high refresh rate displays.
  • High: 118 FPS average. This is a strong result that balances quality and performance.
  • Ultra: 112 FPS average. This is still very playable, but the drop from High is minimal.

The data shows a consistent pattern: as resolution increases, the FPS drops significantly, with 4K Ultra being 6.4x slower than 1080p Low. The gap between Medium and High is smaller than the gap between Low and Medium, indicating diminishing returns at higher settings. The minimum FPS values for Medium settings (47 FPS at 4K, 90 FPS at 1440p, 142 FPS at 1080p) show that the combo can maintain reasonable frame pacing at 1440p and 1080p, but 4K Medium suffers from occasional stutters. This breakdown confirms that the combo is best used at 1080p or 1440p with Medium or High settings, while 4K should be reserved for Low or Medium if the user accepts lower frame rates.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

AMD Radeon RX 7600 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2755 MHz MHz
TDP 190 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + AMD Radeon RX 7600 XT in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 78.0
3840x2160 Medium 55.0
3840x2160 High 39.0
3840x2160 Ultra 37.0
2560x1440 Low 149.0
2560x1440 Medium 105.0
2560x1440 High 74.0
2560x1440 Ultra 71.0
1920x1080 Low 236.0
1920x1080 Medium 167.0
1920x1080 High 118.0
1920x1080 Ultra 112.0

Pc Building Simulator with iUltra 9 290K Plus + Other GPUs

See how Pc Building Simulator performs with the same CPU but different graphics cards.

Pc Building Simulator with RX 7600 XT + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + RX 7600 XT

Explore FPS benchmarks for other games using this same hardware combination.