Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
124
excellent

This combination delivers exceptional performance with an average of 124 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 44 47 66 93
1440p QHD 85 89 126 178
1080p Full HD 135 141 200 283

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 93
3840x2160 Medium 66
3840x2160 High 47
3840x2160 Ultra 44
2560x1440 Low 178
2560x1440 Medium 126
2560x1440 High 89
2560x1440 Ultra 85
1920x1080 Low 283
1920x1080 Medium 200
1920x1080 High 141
1920x1080 Ultra 135

Pc Building Simulator with Intel Core Ultra 9 290K Plus + AMD Radeon RX 6750 XT, In-Depth Analysis

Pc Building Simulator is a simulation title that stresses system assembly logic more than raw rendering, yet the measured frame rates for the Intel Core Ultra 9 290K Plus paired with the AMD Radeon RX 6750 XT reveal a clear performance curve across resolutions and quality presets. The data set includes average FPS for 1080p, 1440p, and 4K at Low, Medium, High, and Ultra settings, with minimum and maximum values recorded only for the Medium preset at each resolution.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent, indicating that the GPU becomes the primary limiting factor at higher pixel counts. At Low settings, the average FPS falls from 283 at 1920x1080 to 178 at 2560x1440, then to 93 at 3840x2160. That represents a 37% reduction from 1080p to 1440p and a 48% reduction from 1440p to 4K. The scaling is not linear — the jump to 4K costs proportionally more performance than the jump to 1440p, which is typical for a GPU with a 192-bit memory bus and 12 GB of GDDR6 memory.

At Medium settings, the pattern holds: 200 FPS at 1080p, 126 FPS at 1440p, and 66 FPS at 4K. The 1440p result is 63% of the 1080p figure, while the 4K result is 52% of the 1440p figure. This suggests that memory bandwidth and pixel throughput are increasingly strained as resolution rises. The GPU’s pixel rate is 166.4 GPixel/s and its texture rate is 416.0 GTexel/s, which are sufficient for 1080p but become bottlenecks at 4K, where the measured Ultra preset drops to 44 FPS average.

High settings show a similar trajectory: 141 FPS at 1080p, 89 FPS at 1440p, and 47 FPS at 4K. The 4K High result is just above the 30 FPS threshold for playability but far from smooth for a simulation game. Ultra settings at 4K are the worst case at 44 FPS average. The data indicates that this combo is comfortable at 1080p and 1440p across all presets, but 4K requires dropping to Low or Medium to maintain 60+ FPS, with only Low reaching 93 FPS at 4K.

The resolution scaling also reveals that the CPU is not the limiting factor at lower resolutions. At 1080p Low, the combo achieves 283 FPS, which is far beyond what most displays can show, and even at 1080p Ultra it maintains 135 FPS. The Intel Core Ultra 9 290K Plus has 24 cores and 24 threads with a boost clock of 5.80 GHz, which provides ample headroom for the simulation’s logic and physics calculations. The GPU, with its 2560 shading units and 64 ROPs, is the component that governs frame rates as pixel count increases.

GPU Role

The AMD Radeon RX 6750 XT is built on the RDNA 2.0 architecture with a Navi 22 chip fabricated on a 7 nm process. Its base clock is 2150 MHz, with a game clock of 2495 MHz and a boost clock of 2600 MHz. The memory operates at 2250 MHz with 18 Gbps effective speed, delivering 432.0 GB/s of bandwidth across a 192-bit bus. These specs directly influence the measured results: the GPU’s 12 GB of GDDR6 memory is sufficient for Pc Building Simulator’s asset loading, but the bandwidth limits performance at 4K, where the frame buffer demands more data per second.

At 1080p, the GPU’s strengths shine. The 283 FPS at Low settings and 200 FPS at Medium show that the rasterization pipeline is not saturated. The FP32 performance of 13.31 TFLOPS and the 40 ray tracing cores are not heavily exercised in a simulation game, which relies more on draw calls and object updates. The GPU’s 160 texture mapping units handle the game’s UI and component models efficiently, and the 64 ROPs are enough to push high pixel counts at lower resolutions.

At 4K, the GPU’s limitations become apparent. The 93 FPS at Low settings is the only 4K result above 60 FPS, and it requires the lowest quality preset. The Medium preset at 4K yields 66 FPS with a minimum of 56 and a maximum of 76, which is playable but shows frame time variance. High and Ultra presets at 4K drop to 47 and 44 FPS respectively, indicating that the GPU is compute-bound at those settings. The 432.0 GB/s bandwidth is the likely constraint, as 4K requires more than double the pixels of 1440p, and the memory bus width of 192 bit cannot keep pace with the demand.

The GPU’s benchmark scores contextualize this behavior. Its PassMark G3D score is 20700, with a PassMark GPU compute score of 9550. The 3DMark Steel Nomad DX12 score is 2548, which is modest for a card that launched at 549 USD in 2022. The nearest rivals in the GPU benchmark data are AMD Radeon R9 M395X (0.5% lower average score), AMD FirePro W7100 (0.6% lower), AMD FirePro D700 (0.7% lower), and NVIDIA GeForce RTX 3080 Ti Mobile (1.1% higher). These deltas are small, meaning the RX 6750 XT sits in a tight performance band relative to those cards, but the measured FPS in Pc Building Simulator shows that its real-world performance is adequate for 1080p and 1440p gaming, with 4K being a stretch.

How This Combo Ranks

The combo ranking for this specific CPU-GPU pair in Pc Building Simulator is 1327 out of 3002 tested combinations. That places it in the 44th percentile of all combos, meaning roughly 56% of tested pairs perform better in this game. The rank is influenced by the GPU’s mid-range positioning; the CPU is a top-tier part, but the RX 6750 XT holds the combo back from higher placement.

The CPU’s own percentile is 96, indicating that it outperforms 96% of all CPUs in synthetic benchmarks. Its average benchmark score is 84003, with nearest rivals including the Intel Core Ultra 9 285K (0.2% higher average score), AMD EPYC 4584PX (1.1% higher), AMD EPYC 9135 (1.2% higher), and AMD EPYC 7F72 (1.3% lower). These are server-class or flagship desktop parts, and the 290K Plus is within 1.2% of them. However, in Pc Building Simulator, the CPU’s strength does not translate to top-tier frame rates because the game is not heavily multithreaded for rendering; the GPU dominates the performance equation.

The GPU’s percentile is 71, which is lower than the CPU’s 96. This mismatch explains the combo rank. A higher-end GPU would push the combo higher in the rankings, but with the RX 6750 XT, the data shows a balanced 1080p/1440p experience. The 3002 total combos include many with weaker CPUs and stronger GPUs, which likely outrank this pair in a game like Pc Building Simulator where GPU load scales with resolution. The rank of 1327 is not a failing grade; it indicates a mid-pack result that is typical for a mid-range GPU paired with a flagship CPU.

Settings Recommendations

The measured FPS rows provide clear guidance on which preset to use at each resolution. At 1920x1080, all four presets exceed 135 FPS average, so the Ultra preset at 135 FPS is the best choice for visual fidelity without sacrificing smoothness. The Medium preset at 200 FPS offers a higher refresh rate option for competitive or fast-paced play, but the simulation genre typically values detail over raw speed. The Low preset at 283 FPS is unnecessary unless the user has a 240 Hz display and wants maximum frame pacing.

At 2560x1440, the Ultra preset averages 85 FPS, which is still smooth and provides the best image quality. The High preset at 89 FPS is nearly identical, so the choice between High and Ultra comes down to minor visual differences. The Medium preset at 126 FPS is the best option for users with 120 Hz or 144 Hz monitors, as it stays within the refresh window. The Low preset at 178 FPS is overkill for most displays but useful for reducing input latency in a game that tracks system diagnostics.

At 3840x2160, the Ultra preset averages 44 FPS, which is below the 60 FPS target for most users. The High preset at 47 FPS is only marginally better. The Medium preset at 66 FPS with a minimum of 56 and a maximum of 76 is the sweet spot for 4K — it stays above 60 FPS on average and only dips slightly in heavy scenes. The Low preset at 93 FPS is the best for maintaining high frame rates at 4K, but it sacrifices visual quality. For most 4K users, Medium offers the best balance: 66 FPS average, playable minimums, and acceptable detail. If the user prefers smoother motion over detail, Low at 93 FPS is the safer choice.

Measured FPS Breakdown

At 1920x1080, the data shows a clear progression: Low averages 283 FPS, Medium averages 200 FPS with a minimum of 170 and a maximum of 230, High averages 141 FPS, and Ultra averages 135 FPS. The gap between Medium and High is 59 FPS, while the gap between High and Ultra is only 6 FPS, indicating that the Ultra preset adds little performance cost over High at 1080p.

At 2560x1440, Low averages 178 FPS, Medium averages 126 FPS with a minimum of 107 and a maximum of 145, High averages 89 FPS, and Ultra averages 85 FPS. The Medium preset’s frame times show a 38 FPS spread between minimum and maximum, which is noticeable but acceptable for a simulation game. The High and Ultra presets are nearly identical, with only 4 FPS separating them, suggesting that the Ultra preset’s extra effects are not GPU-intensive at this resolution.

At 3840x2160, Low averages 93 FPS, Medium averages 66 FPS with a minimum of 56 and a maximum of 76, High averages 47 FPS, and Ultra averages 44 FPS. The Medium preset is the only one with recorded minimum and maximum values, showing a 20 FPS spread. The drop from Low to Medium is 27 FPS, and from Medium to High is 19 FPS, while High to Ultra is only 3 FPS. This pattern indicates that the Ultra preset does not scale performance linearly; it adds a small overhead over High.

The 1080p Medium preset at 200 FPS is the highest recorded average with frame time data, and the 4K Low preset at 93 FPS is the only 4K result that clears 90 FPS. The 1440p Low preset at 178 FPS is the second-highest overall, showing that the GPU can push high frame rates when pixel count is moderate and settings are low.

CPU Role

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor from the Core Ultra Series 2, codenamed Arrow Lake Refresh, built on a 3 nm process by TSMC. Its base clock is 3.70 GHz and boost clock is 5.80 GHz, with a TDP of 125 W. The cache hierarchy includes 192 KB of L1 per core, 3 MB of L2 per core, and 36 MB of shared L3 cache. Memory support is DDR5 with dual-channel bandwidth of 115.2 GB/s, and the CPU supports ECC memory.

In Pc Building Simulator, the CPU’s role is to handle the simulation logic, including component compatibility checks, thermal calculations, and system boot sequences. These tasks are single-threaded or lightly threaded, so the CPU’s high boost clock of 5.80 GHz is more relevant than its core count. The Cinebench R23 single-core score of 7303 and multi-core score of 51731 show that the CPU is strong in both realms, but the game does not use all 24 cores effectively. The PassMark single-thread score of 4823 and multithread score of 60860 reinforce this: the single-thread performance is what matters for this genre.

The CPU’s nearest rivals in benchmark scores include the Intel Core Ultra 9 285K (0.2% higher average score), AMD EPYC 4584PX (1.1% higher), AMD EPYC 9135 (1.2% higher), and AMD EPYC 7F72 (1.3% lower). These differences are within 1.3%, meaning the 290K Plus is essentially tied with its closest competitors in synthetic tests. In Pc Building Simulator, the CPU’s performance does not bottleneck the GPU at any resolution, as evidenced by the high frame rates at 1080p (up to 283 FPS on Low). The CPU’s 24 threads handle background tasks like operating system overhead and game logic without impacting frame rates.

The CPU’s integrated graphics, Arc Xe-LPG Graphics 64EU, are not used when the discrete RX 6750 XT is installed, but the CPU’s 125 W TDP and 3 nm process keep power draw manageable. The 115.2 GB/s memory bandwidth is sufficient for the game’s data streaming, and the 36 MB L3 cache reduces memory latency. Even at 1080p Low, where the CPU’s influence is most visible due to high frame rates, the 290K Plus delivers 283 FPS, which is above the refresh rate of most monitors. At 4K, the CPU is idle relative to the GPU, so its role is reduced to maintaining stable frame pacing.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Pc Building Simulator?

A: The data shows that 2560x1440 is the sweet spot. At Medium settings, it achieves 126 FPS average with a minimum of 107 FPS, and at Ultra it reaches 85 FPS. 1920x1080 offers higher frame rates (up to 283 FPS on Low), but 1440p provides a better balance of visual detail and smoothness.

Q: Can this combo run the game at 4K with playable frame rates?

A: Yes, but only at lower settings. At 4K Low, the average FPS is 93, and at Medium it is 66 FPS with a minimum of 56 FPS. High and Ultra presets drop to 47 and 44 FPS respectively, which are below the 60 FPS target for smooth play.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Intel Core Ultra 9 290K Plus has an average benchmark score of 84003. The Intel Core Ultra 9 285K scores 0.2% higher, the AMD EPYC 4584PX scores 1.1% higher, the AMD EPYC 9135 scores 1.2% higher, and the AMD EPYC 7F72 scores 1.3% lower. All deltas are within 1.3%.

Q: What is the GPU’s performance percentile relative to all tested GPUs?

A: The AMD Radeon RX 6750 XT sits in the 71st percentile of all GPUs, with an average benchmark score of 26011. Its nearest rivals include the AMD Radeon R9 M395X (0.5% lower), AMD FirePro W7100 (0.6% lower), AMD FirePro D700 (0.7% lower), and NVIDIA GeForce RTX 3080 Ti Mobile (1.1% higher).

Q: Which settings preset should I use at 1080p for the best experience?

A: The Ultra preset averages 135 FPS, which is smooth and visually detailed. If you have a high refresh rate display (144 Hz or higher), the Medium preset at 200 FPS is better. The Low preset at 283 FPS offers the highest frame rates but sacrifices visual quality.

Q: Does the CPU bottleneck the GPU at any resolution?

A: No. The CPU’s boost clock of 5.80 GHz and 24 threads ensure that it does not limit frame rates. At 1080p Low, the combo reaches 283 FPS, and at 4K Ultra, the GPU is the limiting factor at 44 FPS. The CPU’s single-core performance, as shown by its Cinebench R23 single-core score of 7303, is more than sufficient for this simulation game.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

AMD Radeon RX 6750 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2600 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + AMD Radeon RX 6750 XT in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 93.0
3840x2160 Medium 66.0
3840x2160 High 47.0
3840x2160 Ultra 44.0
2560x1440 Low 178.0
2560x1440 Medium 126.0
2560x1440 High 89.0
2560x1440 Ultra 85.0
1920x1080 Low 283.0
1920x1080 Medium 200.0
1920x1080 High 141.0
1920x1080 Ultra 135.0

Pc Building Simulator with iUltra 9 290K Plus + Other GPUs

See how Pc Building Simulator performs with the same CPU but different graphics cards.

Pc Building Simulator with RX 6750 XT + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + RX 6750 XT

Explore FPS benchmarks for other games using this same hardware combination.