Pc Building Simulator

How This Combo Ranks

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce RTX 5060 achieves a rank of 1648 out of 3723 tested combos in Pc Building Simulator. This places the combination in the upper-middle tier of all tested systems, roughly in the 56th percentile of configurations. The ranking reflects a pairing where the CPU is substantially stronger than the GPU in raw benchmark terms, yet the game's results are shaped by how these two components interact.

The CPU alone sits at the 92nd percentile among all processors, while the GPU holds the 72nd percentile among all graphics cards. This disparity suggests the combo's overall rank is constrained by the graphics card, which is the weaker link in this pairing. In the database's measured results, this combination outperforms roughly 55.7% of all tested combos, indicating that while it is not a top-tier configuration, it delivers solidly playable performance across most settings.

The nearest rival CPUs for the Ryzen 9 9900X are the AMD EPYC 9015 (0.1% lower average score), the AMD EPYC 7313 (0.2% higher), the Intel Core i9-14900 (1.1% higher), and the Intel Xeon Platinum 8260M (1.4% higher). These small delta percentages confirm that the 9900X is competitively positioned among high-end processors, though the game's actual frame rates will depend more on the GPU. For the RTX 5060, the nearest GPU rivals are the AMD Radeon 860M (0.3% lower), the NVIDIA GeForce MX550 (0.3% lower), the AMD Radeon RX 5700 XT 50th Anniversary (0.8% lower), and the AMD Radeon RX 6750 XT (1.2% higher). The GPU's average benchmark score of 26331 is only modestly different from these rivals, indicating that the RTX 5060 performs in a narrow band around these cards.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture using a 5 nm process at TSMC, with a chip designated GB206. It contains 21,900 million transistors on a die size of 181 mm². The GPU operates with a base clock of 2280 MHz and a boost clock of 2497 MHz, with memory clocked at 1750 MHz (28 Gbps effective). This configuration yields a pixel rate of 119.9 GPixel/s and a texture rate of 299.6 GTexel/s, with FP32 performance rated at 19.18 TFLOPS.

Memory configuration is 8 GB of GDDR7 on a 128-bit bus, providing 448.0 GB/s of bandwidth. This is a crucial specification for Pc Building Simulator, where the game's asset loading and simulation elements can be sensitive to memory bandwidth. The 8 GB capacity is adequate for this title, which is not particularly VRAM-hungry compared to modern AAA games. The GPU has 3840 shading units, 120 TMUs, and 48 ROPs, along with 30 RT cores and 120 tensor cores. The card draws a TDP of 145 W and requires a 300 W suggested PSU, connecting via a single 8-pin power connector.

Benchmark results for the RTX 5060 show a PassMark G3D score of 20891 and a PassMark GPU Compute score of 10899. In DirectX 11, the PassMark score is 200, while DirectX 12 yields 77, and DirectX 10 gives 127. The Geekbench OpenCL score is 112787, and the Vulkan score is 113321. These scores place the GPU at the 72nd percentile overall, with the nearest rival being the AMD Radeon RX 6750 XT at 1.2% higher average score. The 3DMark Steel Nomad DX12 score is 3628, which provides a synthetic reference point for the GPU's capabilities.

In the context of Pc Building Simulator, the GPU's role is evident in the frame rate scaling across settings. The 8 GB GDDR7 memory at 448.0 GB/s bandwidth is sufficient for the game's simulation elements, but the GPU becomes the primary bottleneck at higher resolutions and settings. The data shows that at 4K Ultra settings, the average FPS drops to 45, indicating that the GPU's 19.18 TFLOPS of compute is strained by the game's rendering demands at that resolution.

CPU Role

The AMD Ryzen 9 9900X is a 12-core, 24-thread processor based on the Zen 5 architecture, codenamed Granite Ridge. It has a base clock of 4.40 GHz and a boost clock of 5.60 GHz, with a TDP of 120 W. The CPU is manufactured on a 4 nm process at TSMC, containing 16,630 million transistors across two 70.6 mm² dies. It supports DDR5 memory in dual-channel configuration, with a memory bandwidth of 89.6 GB/s and ECC memory support.

The cache hierarchy includes 80 KB of L1 per core, 1 MB of L2 per core, and 64 MB of L3 cache. The CPU connects via PCIe Gen 5 with 24 lanes (CPU only) and includes integrated Radeon Graphics. It was released on 2024-08-14 with a launch MSRP of $499, and the multiplier is unlocked for overclocking.

Benchmark scores for the 9900X are substantial. In Cinebench R23, the multicore score is 32172 and the single-core score is 2253. Geekbench yields a multicore score of 22174 and a single-core score of 3010. PassMark multithread score is 54643, with a single-thread score of 4672. The 3DMark scores scale from 1286 (single thread) to 13929 (max threads), showing strong scaling across thread counts. The PassMark data compression score is 683579, data encryption is 33421, and extended instructions is 55243.

For Pc Building Simulator, the CPU's role is less prominent than the GPU's, but still relevant. The game's simulation logic benefits from the 12 cores and 24 threads, particularly in the physics and data-processing elements. The PassMark physics score of 3381 indicates competent physics processing, which is relevant for a building simulator where component interactions are simulated. However, the measured FPS data shows that the CPU is rarely the limiting factor in this game, as frame rates scale more dramatically with resolution changes than with settings changes alone.

The CPU's 92nd percentile ranking among all processors highlights its strength relative to the GPU's 72nd percentile. The nearest rival CPUs show the 9900X is within 1.4% of the Intel Core i9-14900 and within 0.2% of the AMD EPYC 7313, confirming its competitive position. The high single-thread score of 4672 in PassMark is particularly relevant, as Pc Building Simulator may have single-threaded bottlenecks in certain simulation aspects, though the 12-core count provides ample headroom for multi-threaded workloads.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, providing a comprehensive view of the combo's performance in Pc Building Simulator.

1080p Resolution: At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 284 FPS, which is the highest measured value across all configurations. Medium settings yield 201 FPS with a minimum of 171 and maximum of 232. High settings reduce the average to 142 FPS, while Ultra settings give 135 FPS. The gap between Low and Ultra is 149 FPS, representing a 52.5% drop from the lowest to highest settings preset.

1440p Resolution: At 2560x1440, the frame rates remain strong but begin to show the GPU's limitations. Low settings average 179 FPS, which is 105 FPS lower than the 1080p Low result. Medium settings average 127 FPS with a range of 108 to 146. High settings produce 90 FPS, and Ultra settings drop to 85 FPS. The difference between Low and Ultra at this resolution is 94 FPS, a 52.5% reduction, matching the percentage drop seen at 1080p.

4K Resolution: At 3840x2160, the GPU becomes the clear bottleneck. Low settings average 94 FPS, which is nearly half of the 1080p Low result. Medium settings average 66 FPS with a range of 56 to 76, which is the only 4K configuration with recorded min/max values. High settings drop to 47 FPS, and Ultra settings average 45 FPS. The Ultra result at 4K is the lowest measured frame rate in the entire dataset, falling below the 60 FPS threshold that many users consider the minimum for smooth gameplay.

The data reveals a consistent pattern: at each resolution, the difference between Low and Medium is substantial (e.g., 86 FPS at 1080p, 52 FPS at 1440p, 28 FPS at 4K), while the difference between High and Ultra is much smaller (7 FPS at 1080p, 5 FPS at 1440p, 2 FPS at 4K). This suggests that the Ultra preset offers diminishing returns over High for this game.

FAQ

Q: Is the AMD Ryzen 9 9900X a bottleneck for the RTX 5060 in Pc Building Simulator?

A: The data indicates the CPU is not a bottleneck. The 9900X ranks at the 92nd percentile among all CPUs, with a PassMark single-thread score of 4672 and multithread score of 54643. The GPU ranks at the 72nd percentile, and the frame rate scaling across resolutions suggests the GPU is the limiting component, particularly at higher settings.

Q: Can this combo achieve 60 FPS at 4K in Pc Building Simulator?

A: At 4K, the combo averages 66 FPS on Medium settings, which is above 60 FPS. However, at High settings the average drops to 47 FPS, and at Ultra it is 45 FPS. So 4K 60 FPS is achievable only with Medium settings or lower.

Q: How does the RTX 5060 compare to its nearest rival in performance?

A: The RTX 5060's average benchmark score is 26331, while the AMD Radeon RX 6750 XT scores 1.2% higher, and the AMD Radeon 860M scores 0.3% lower. The NVIDIA GeForce MX550 is 0.3% lower, and the AMD Radeon RX 5700 XT 50th Anniversary is 0.8% lower. These small deltas indicate all four cards perform in a similar band.

Q: What is the best settings preset for 1440p gaming?

A: At 2560x1440, Medium settings provide an average of 127 FPS with a minimum of 108 FPS, which is well above smooth gameplay thresholds. High settings drop to 90 FPS, and Ultra to 85 FPS. Medium offers the best balance, maintaining high frame rates with improved visuals over Low.

Q: Does the 8 GB VRAM on the RTX 5060 limit performance in this game?

A: The 8 GB GDDR7 memory with 448.0 GB/s bandwidth appears adequate for Pc Building Simulator. The frame rate scaling is consistent across resolutions, and there is no evidence of VRAM-related stuttering in the measured data. The game's requirements are modest, so the VRAM capacity is not a limiting factor.

Q: How does this combo's overall ranking compare to its component rankings?

A: The combo ranks 1648 out of 3723 total combos, which is the 56th percentile. The CPU ranks at the 92nd percentile and the GPU at the 72nd percentile. The combo's rank is lower than both component percentiles, indicating that the pairing does not fully utilize the CPU's potential, with the GPU constraining overall performance.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and desired frame rate. For 1080p, the combo is so powerful that even Ultra settings deliver 135 FPS, making the Ultra preset the best choice for maximum visual quality without sacrificing smoothness. The 142 FPS at High settings is also excellent, but the 7 FPS difference between High and Ultra is negligible, so the Ultra preset is recommended for 1080p.

At 1440p, the recommendation shifts to Medium settings. The Medium preset delivers 127 FPS average with a minimum of 108 FPS, which provides a comfortable margin above the 60 FPS threshold. High settings at 90 FPS are also playable, but the 37 FPS drop from Medium to High is significant, while the 5 FPS difference between High and Ultra is minimal. The Medium preset offers the best combination of visual fidelity and frame rate stability, with the recorded min/max range of 108 to 146 FPS showing consistent performance.

For 4K, the data suggests using Low or Medium settings. Low settings average 94 FPS, which is smooth, while Medium averages 66 FPS—still above 60 FPS but with a minimum of 56 FPS that could occasionally dip below. High settings at 47 FPS and Ultra at 45 FPS are below the 60 FPS threshold and may result in noticeable stuttering. The Medium preset at 4K is the highest settings option that maintains an average above 60 FPS, though users prioritizing frame rate consistency might prefer Low settings for the higher 94 FPS average.

The pattern across all resolutions shows that the Medium preset provides the best balance. At 1080p, Medium gives 201 FPS, which is overkill for most displays, so Ultra is preferable. At 1440p, Medium gives 127 FPS with a tight min/max range, making it the most balanced choice. At 4K, Medium gives 66 FPS average, which is the highest settings preset that remains above 60 FPS. The diminishing returns from High to Ultra (never more than 7 FPS difference) suggest that Ultra is rarely worth the performance cost.

Resolution Scaling

The measured FPS data shows how the combo scales across resolutions, revealing the limiting component. From 1080p to 1440p, the average FPS drops by approximately 37-40% across all settings presets. From 1440p to 4K, the drop is more severe, ranging from 47-50%. From 1080p to 4K, the total drop is roughly 67-70%, which is consistent with the increase in pixel count.

The scaling pattern is instructive. At Low settings, the 1080p to 4K drop is from 284 to 94 FPS, a 66.9% reduction. At Ultra settings, the drop is from 135 to 45 FPS, a 66.7% reduction. The consistency of these percentages across settings presets indicates that the scaling is primarily resolution-driven rather than settings-driven. This is a hallmark of a GPU-limited scenario, where the rendering load increases with pixel count regardless of the visual quality settings.

The CPU's role in this scaling is minimal. With a 12-core, 24-thread processor and a PassMark multithread score of 54643, the 9900X has ample headroom to feed the GPU at all resolutions. The GPU's 8 GB of GDDR7 memory and 448.0 GB/s bandwidth are sufficient for the game's data requirements, but the 19.18 TFLOPS of FP32 compute becomes the limiting factor as resolution increases.

The data shows a clear inflection point between 1440p and 4K. At 1440p, the combo maintains playable frame rates at all settings presets, with the lowest result being 85 FPS at Ultra. At 4K, the Ultra preset drops to 45 FPS, which is below the 60 FPS threshold. This indicates that 1440p is the effective ceiling for this combo at high settings, while 4K requires Low or Medium settings for smooth gameplay. The GPU's 72nd percentile ranking relative to the CPU's 92nd percentile confirms that the RTX 5060 is the limiting component, and users seeking higher 4K performance would need to consider a more powerful GPU.