Pc Building Simulator

The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 5090 delivers exceptional frame rates in Pc Building Simulator, a simulation title that scales dramatically across resolutions. The measured data shows this combination achieving a combo rank of 36 out of 3002 tested configurations in this game, placing it in the top 1.2% of all pairings. This high ranking is consistent with the individual component percentiles—the CPU sits at the 92nd percentile against all processors, while the GPU also sits at the 92nd percentile against all graphics cards. The benchmark results reveal a system that is heavily GPU-limited at higher resolutions but transitions to a more balanced profile at 1080p, where the CPU’s strong single-thread performance becomes more relevant.

Resolution Scaling

The frame rate progression from 1080p to 4K clearly illustrates how the rendering load shifts between components. At 1920x1080 with Low settings, the system produces 476 FPS, which drops to 336 FPS at 2560x1440 and then to 176 FPS at 3840x2160. This represents a 63% reduction from 1080p to 4K at Low settings, indicating that the GPU is the primary constraint even at the lowest quality preset. The scaling pattern is consistent across all settings levels: High settings yield 266 FPS at 1080p, 168 FPS at 1440p, and 88 FPS at 4K—a 67% drop from the lowest to highest resolution. Ultra settings show a similar trajectory with 253 FPS at 1080p, 160 FPS at 1440p, and 84 FPS at 4K, a 67% reduction.

The data suggests that Pc Building Simulator is heavily GPU-bound at 4K, where the RTX 5090’s raw throughput becomes the limiting factor. At 1080p, however, the scaling from Low to Ultra shows a narrower gap, with the system only losing 47% of its performance when moving from the lowest to highest quality preset (476 FPS down to 253 FPS). This narrower gap at 1080p implies that the CPU begins to play a more significant role in maintaining frame rates, as the GPU has enough headroom to render frames faster than the processor can feed it. The 8-core, 16-thread Ryzen 7 9850X3D with its 5.60 GHz boost clock appears sufficient to keep up with the GPU’s output at lower resolutions, but the 4K results indicate that the RTX 5090’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are being fully utilized.

FAQ

Q: What is the maximum average frame rate this combo achieves in Pc Building Simulator?

A: The highest measured average FPS is 476, achieved at 1920x1080 resolution with Low settings. This is followed by 377 FPS at Medium settings and 336 FPS at 1440p with Low settings.

Q: How does the RTX 5090 perform compared to its nearest rivals in synthetic benchmarks?

A: The GPU’s average benchmark score of 79842 places it just 0.3% ahead of the NVIDIA Tesla P100 PCIe 16 GB (79605) and 0.6% ahead of the Tesla P100 PCIe 12 GB (79396). It trails the AMD Radeon Pro Vega 64X (80959) by 1.4%.

Q: What is the CPU’s benchmark standing relative to other processors?

A: The Ryzen 7 9850X3D has an average benchmark score of 58386, which is 0.1% higher than the Intel Xeon Platinum 8260M (58323) and 0.5% higher than the Intel Core i9-14900 (58115). It trails the AMD Ryzen AI 9 HX 470 (58826) by 0.7%.

Q: Which resolution shows the smallest performance gap between Low and Ultra settings?

A: At 3840x2160, the gap between Low (176 FPS) and Ultra (84 FPS) is 92 FPS, representing a 52% reduction. At 1920x1080, the gap is larger at 223 FPS (476 to 253), a 47% reduction in relative terms but a greater absolute difference.

Q: Does the system maintain playable frame rates at 4K with Ultra settings?

A: Yes, the measured average of 84 FPS at 3840x2160 with Ultra settings exceeds the typical 60 FPS threshold for smooth gameplay. The Medium preset at 4K provides a more comfortable margin at 124 FPS with a minimum of 106 FPS.

Q: How does the CPU’s single-thread performance compare to its multi-thread results?

A: The CPU scores 343 in Cinebench R15 single-core and 3551 in multi-core, while Cinebench R23 shows 2228 single-core and 22807 multi-core. The PassMark single-thread score is 4704, compared to 41318 for multi-thread, indicating strong per-core performance that benefits simulation titles.

How This Combo Ranks

This specific combination of AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5090 ranks 36th out of 3002 tested combos in Pc Building Simulator. This top-tier placement aligns with the component-level percentile rankings, where both the CPU and GPU sit at the 92nd percentile against all comparable hardware. The ranking suggests that this pairing is well-balanced for this simulation title, though the data indicates the GPU is the dominant factor in determining final frame rates.

The CPU’s nearest rivals in benchmark scores include the Intel Xeon Platinum 8260M (deltaPct 0.1), Intel Xeon w5-2545 (deltaPct -0.2), Intel Core i9-14900 (deltaPct 0.5), and AMD Ryzen AI 9 HX 470 (deltaPct -0.7). These small deltas indicate that the Ryzen 7 9850X3D sits in a dense cluster of high-performance processors, where differences of less than 1% separate top contenders. The GPU’s nearest rivals—NVIDIA Tesla P100 PCIe 16 GB (deltaPct 0.3), Tesla P100 PCIe 12 GB (deltaPct 0.6), AMD Radeon RX 6850M XT (deltaPct 1.1), and AMD Radeon Pro Vega 64X (deltaPct -1.4)—similarly show that the RTX 5090 is at the frontier of graphics performance, with only marginal differences separating it from other high-end parts.

The 36th rank out of 3002 combos reflects a system that delivers near-top-tier performance in this game, though the measured FPS data shows that even this powerful pairing cannot push 4K Ultra beyond 84 FPS. This suggests that Pc Building Simulator has significant GPU demands at high resolutions, and the RTX 5090’s 32 GB frame buffer is being taxed despite its massive bandwidth advantage over rival cards.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest results. Low settings produce 476 FPS average, Medium settings yield 377 FPS with a minimum of 320 and maximum of 433, High settings reach 266 FPS, and Ultra settings maintain 253 FPS. The gap between Low and Ultra is 223 FPS, showing that the GPU can handle the increased graphical load at this resolution without significant frame rate degradation.

At 2560x1440, frame rates remain high but show more sensitivity to settings. Low settings produce 336 FPS, Medium settings deliver 238 FPS with a minimum of 202 and maximum of 274, High settings reach 168 FPS, and Ultra settings drop to 160 FPS. The difference between Low and Ultra is 176 FPS, representing a 52% reduction, which indicates the GPU is being pushed harder at this resolution.

At 3840x2160, the system shows its limits. Low settings produce 176 FPS, Medium settings yield 124 FPS with a minimum of 106 and maximum of 143, High settings reach 88 FPS, and Ultra settings drop to 84 FPS. The gap between Low and Ultra is 92 FPS, a 52% reduction that mirrors the 1440p scaling. The Medium preset at 4K provides the best balance of performance and quality, with an average of 124 FPS and a minimum that never drops below 106 FPS.

The data shows that the system scales predictably across resolutions and settings, with the 4K Ultra result of 84 FPS being the only measurement below the 100 FPS mark. All other configurations exceed 124 FPS, demonstrating that this pairing is capable of high-refresh-rate gaming at 1080p and 1440p, while remaining playable at 4K with appropriate settings adjustments.

GPU Role

The NVIDIA GeForce RTX 5090 serves as the primary driver of frame rates in this benchmark, particularly at higher resolutions. With 32 GB of GDDR7 memory on a 512-bit bus, the GPU provides 1.79 TB/s of bandwidth—a figure that becomes crucial when rendering at 3840x2160, where the 4K results show the most significant performance drops. The GPU’s boost clock of 2407 MHz and base clock of 2017 MHz are complemented by 21760 shading units, 680 texture mapping units, and 176 raster output units, giving it substantial raw compute capability.

The synthetic benchmark scores reinforce the GPU’s role. The PassMark G3D score of 39650 and PassMark GPU Compute score of 26756 indicate strong general-purpose and compute performance, while the 3DMark Steel Nomad DX12 score of 18355 shows DirectX 12 capability. The Geekbench OpenCL score of 334370 and Vulkan score of 376728 further demonstrate the GPU’s API versatility. The GPU’s percentile ranking of 92 against all graphics cards places it in the upper echelon, with nearest rivals showing deltas within 1.4%—the AMD Radeon Pro Vega 64X being the only competitor that scores higher.

The 4K results specifically highlight the GPU’s importance. At 3840x2160, the frame rate drops by 52% when moving from Low to Ultra settings, compared to a 47% drop at 1080p. This steeper decline at 4K indicates that the GPU’s memory bandwidth and fill rate are being saturated, and the 32 GB frame buffer allows the card to handle large textures without stuttering, as evidenced by the Medium preset’s minimum FPS of 106 at 4K. The RTX 5090’s 104.8 TFLOPS of FP32 performance and 423.6 GPixel/s pixel rate provide the computational headroom needed for this simulation’s rendering demands.

CPU Role

The AMD Ryzen 7 9850X3D plays a supporting but essential role in this combo, particularly at lower resolutions where the GPU has surplus capacity. With 8 cores and 16 threads based on the Zen 5 architecture (Granite Ridge), the CPU runs at a base clock of 4.70 GHz and boosts to 5.60 GHz. This high boost clock is critical for simulation games like Pc Building Simulator, which often rely on single-thread performance for game logic and physics calculations.

The CPU’s benchmark results show strong single-thread capability. The Cinebench R23 single-core score of 2228 and multi-core score of 22807 demonstrate balanced performance, while the PassMark single-thread score of 4704 indicates excellent per-core efficiency. The data compression score of 474501 and data encryption score of 22856 further illustrate the CPU’s ability to handle varied workloads. The 96 MB of shared L3 cache and 1 MB L2 per core provide ample storage for frequently accessed data, reducing latency in compute-heavy scenarios.

The CPU’s role becomes more apparent at 1080p, where the frame rate gap between Low and Ultra settings narrows to 47%. At this resolution, the RTX 5090 can render frames faster than the CPU can process game logic, making the processor the limiting factor. The Ryzen 7 9850X3D’s 4 nm process and 120 W TDP allow it to maintain high boost clocks without thermal throttling, ensuring consistent performance. Its nearest rivals—the Intel Xeon Platinum 8260M, Intel Xeon w5-2545, Intel Core i9-14900, and AMD Ryzen AI 9 HX 470—all score within 0.7% of this CPU, indicating that the 9850X3D is competitive but not dominant in synthetic tests. The 92nd percentile ranking against all CPUs confirms its position as a high-end processor suitable for pairing with flagship GPUs.

Settings Recommendations

The measured FPS data provides clear guidance for optimal settings across different resolutions. At 1920x1080, all settings levels produce frame rates above 253 FPS, making Ultra the obvious choice for maximum visual quality without sacrificing smoothness. The 253 FPS average at Ultra is more than sufficient for high-refresh-rate monitors, and the GPU has enough headroom to maintain this performance even in demanding scenes.

At 2560x1440, the Medium preset offers the best balance with 238 FPS average and a minimum of 202 FPS. The High preset at 168 FPS is also viable, but the step from High to Ultra (160 FPS) shows diminishing returns at this resolution. The Low preset at 336 FPS is unnecessary given the high frame rates available at higher quality settings.

At 3840x2160, the Medium preset is the recommended choice, delivering 124 FPS average with a minimum of 106 FPS. This provides a comfortable margin above the 60 FPS threshold while maintaining visual quality. The High preset at 88 FPS is playable but leaves less headroom for frame rate drops during complex scenes, while Ultra at 84 FPS is at the edge of smooth gameplay. The Low preset at 176 FPS sacrifices too much visual fidelity for the frame rate gain.

For users prioritizing frame rate over visual quality, the Low preset at 4K provides 176 FPS, which is ideal for competitive play or high-refresh-rate displays. However, the data suggests that the Medium preset at 4K offers the optimal compromise between the 84 FPS of Ultra and the 176 FPS of Low, making it the best all-around setting for this game with this hardware combination.