Pc Building Simulator

# Pc Building Simulator: AMD Ryzen 7 5700X + NVIDIA GeForce RTX 4060

The AMD Ryzen 7 5700X paired with the NVIDIA GeForce RTX 4060 delivers a decidedly GPU-bound experience in Pc Building Simulator, with frame rates that scale dramatically with resolution but remain playable even at 4K. At 1080p, this combo produces exceptional performance, pushing past 250 FPS at Low settings, while at 4K Ultra it falls to 41.7 FPS. The data shows a system that is clearly limited by the RTX 4060's 8 GB VRAM and 128-bit memory bus at higher resolutions, but the Ryzen 7 5700X's 8 cores and 16 threads provide ample headroom for the simulation's CPU demands. This combination ranks 997th out of 1769 tested combos, placing it in the upper-middle tier of the database, with the GPU's 66th percentile standing against all GPUs and the CPU's 83rd percentile against all CPUs indicating a balanced pairing where the GPU is the more likely bottleneck.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, revealing a system that scales predictably with pixel count. At Low settings, the average FPS falls from 268.2 at 1080p to 168.3 at 1440p, a 37% reduction, and then to 89.7 at 4K, a 47% further drop from 1440p. This pattern indicates that the RTX 4060 is the primary limiting component, as the CPU's 8 cores and 16 threads have ample capacity to feed frames even at lower resolutions.

At High settings, the scaling is more moderate in absolute terms but still significant: 131.3 FPS at 1080p drops to 86.1 at 1440p (34% lower) and then to 42 at 4K (51% lower than 1440p). The Ultra preset shows the same trend, with 126.8 FPS at 1080p falling to 79.8 at 1440p and 41.7 at 4K. The similarity between High and Ultra results at each resolution — only 4.5 FPS difference at 1080p and 0.3 FPS at 4K — suggests that the Ultra preset's additional graphical effects are not the bottleneck; rather, the GPU's raw throughput and memory bandwidth are the limiting factors.

The 4K results are particularly telling. At 4K Ultra, the system averages 41.7 FPS, which is only marginally above the 42 FPS at 4K High, indicating that the GPU is saturated regardless of preset once pixel count reaches 4K. The 4K Low result of 89.7 FPS shows that even with reduced graphical load, the RTX 4060 cannot maintain high refresh rates at this resolution. The gap between 1080p and 4K at Low settings — 178.5 FPS — is the largest of any settings comparison, confirming that the GPU's 8 GB GDDR6 memory and 272.0 GB/s bandwidth are the primary constraints at higher resolutions.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset at 1440p is the sweet spot for this combination. At 1440p Medium, the system delivers 120.9 FPS, which is more than sufficient for smooth gameplay in a simulation title, while 1440p High drops to 86.1 FPS and 1440p Ultra to 79.8 FPS. The jump from Medium to High at 1440p costs 34.8 FPS, a 29% reduction, while the visual improvement in a simulation game may not justify that loss.

At 1080p, the High preset at 131.3 FPS is recommended for those prioritizing visual fidelity, as it maintains over 130 FPS while offering better graphical quality than Medium's 189.9 FPS. The Ultra preset at 1080p, at 126.8 FPS, is only 4.5 FPS slower than High, making Ultra a viable choice for 1080p users who want maximum quality without significant performance loss. However, the data shows diminishing returns: Ultra at 1080p delivers only 3% lower FPS than High, but at 1440p the gap widens to 7% and at 4K to 1%.

For 4K users, the Low preset at 89.7 FPS is the only option that approaches playable frame rates, but the visual compromise may be substantial for a simulation game where detail matters. The Medium preset at 4K delivers 64.3 FPS, which is playable but not ideal for smooth camera movement. The data suggests that this combination is best suited for 1080p or 1440p gaming, with 4K reserved for users who prioritize frame rate over graphical fidelity.

FAQ

Q: Can this combo handle 4K gaming in Pc Building Simulator?

A: Yes, but with significant compromises. At 4K Low, the system averages 89.7 FPS, while 4K Medium drops to 64.3 FPS and 4K Ultra to 41.7 FPS. For a simulation game, 4K Medium at 64.3 FPS is playable, but users seeking higher frame rates should consider 1440p.

Q: How much performance is lost between 1080p and 1440p?

A: The drop varies by settings. At Low, 1080p produces 268.2 FPS versus 168.3 at 1440p, a 99.9 FPS difference. At High, the gap is 45.2 FPS (131.3 vs 86.1), and at Ultra, it is 47 FPS (126.8 vs 79.8). The percentage loss ranges from 34% to 37%.

Q: What is the difference between High and Ultra settings?

A: At 1080p, High averages 131.3 FPS and Ultra 126.8 FPS, a 4.5 FPS difference. At 1440p, High is 86.1 FPS and Ultra 79.8 FPS, a 6.3 FPS gap. At 4K, the difference narrows to 0.3 FPS (42 vs 41.7), indicating the GPU is fully saturated.

Q: Is the RTX 4060 or the Ryzen 7 5700X the bottleneck?

A: The GPU is clearly the limiting factor. The RTX 4060's 8 GB GDDR6 memory and 128-bit bus with 272.0 GB/s bandwidth struggle at higher resolutions, while the Ryzen 7 5700X's 8 cores and 16 threads provide strong single-threaded performance (921 in 3dmark_single_thread) and multithreaded capability (6858 in 3dmark_16_threads).

Q: How does this combo rank against other tested configurations?

A: This combination ranks 997th out of 1769 tested combos in Pc Building Simulator. The CPU ranks in the 83rd percentile against all CPUs, while the GPU ranks in the 66th percentile against all GPUs, indicating a higher-performing CPU relative to its GPU counterpart.

Q: Should I play at 1080p or 1440p with this setup?

A: For maximum frame rates, 1080p is ideal, with Ultra hitting 126.8 FPS and Medium reaching 189.9 FPS. For a balance of quality and performance, 1440p Medium at 120.9 FPS is excellent, while 1440p High at 86.1 FPS is still very playable.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce 268.2 FPS, Medium 189.9 FPS, High 131.3 FPS, and Ultra 126.8 FPS. The spread from Low to Ultra is 141.4 FPS, with the largest single drop occurring between Low and Medium (78.3 FPS). The High-to-Ultra transition costs only 4.5 FPS, making Ultra essentially free at this resolution.

Moving to 2560x1440, performance drops significantly. Low settings average 168.3 FPS, Medium 120.9 FPS, High 86.1 FPS, and Ultra 79.8 FPS. The Low-to-Ultra spread narrows to 88.5 FPS, and the High-to-Ultra gap is just 6.3 FPS. At this resolution, Medium offers the best performance-to-quality ratio, maintaining over 120 FPS.

At 3840x2160, the system becomes heavily GPU-bound. Low settings produce 89.7 FPS, Medium 64.3 FPS, High 42 FPS, and Ultra 41.7 FPS. The Low-to-Ultra spread is 48 FPS, and notably, High and Ultra are nearly identical, with only 0.3 FPS separating them. This indicates that at 4K, the GPU's memory bandwidth and capacity are the overriding constraints, regardless of graphical preset.

The data shows a consistent pattern: the RTX 4060's performance degrades proportionally with pixel count, and the CPU's influence diminishes as resolution increases. At 1080p, the Ryzen 7 5700X can feed the GPU effectively, but at 4K, the GPU's limitations dominate.

GPU Role

The NVIDIA GeForce RTX 4060 is the defining component in this combination's Pc Building Simulator performance. Its 8 GB GDDR6 memory on a 128-bit bus delivers 272.0 GB/s bandwidth, which proves insufficient for maintaining high frame rates at 4K. The GPU's base clock of 1830 MHz and boost clock of 2460 MHz provide solid raw compute — 15.11 TFLOPS FP32 — but the memory subsystem is the bottleneck in this title.

The GPU's benchmark scores corroborate its mid-range positioning: a PassMark G3D score of 19545 places it in the 66th percentile against all GPUs. Its nearest rivals in the database include the AMD Radeon RX 6600M (deltaPct -0.6), NVIDIA GeForce GTX 780 Ti (deltaPct -0.7), Intel Arc B580 (deltaPct 0.7), and AMD Radeon 760M (deltaPct 0.8). This tight clustering around a 0.7% delta indicates that the RTX 4060 performs in a narrow band relative to its peers, with no clear performance leader among them.

In Pc Building Simulator specifically, the GPU's role is evident in the resolution scaling. At 1080p, the GPU can achieve 268.2 FPS at Low, but this falls to 89.7 FPS at 4K Low — a 67% reduction. The GPU's 8 GB frame buffer likely becomes a constraint at 4K Ultra, where memory-hungry textures may exceed capacity, causing the minimal difference between High (42 FPS) and Ultra (41.7 FPS) at that resolution.

CPU Role

The AMD Ryzen 7 5700X, with 8 cores and 16 threads based on Zen 3 architecture, provides ample processing power for Pc Building Simulator. Its base clock of 3.40 GHz and boost clock of 4.60 GHz, combined with 32 MB of shared L3 cache, deliver strong single-threaded performance — evidenced by a 3dmark_single_thread score of 921 and a Cinebench R23 single-core score of 3193. The CPU's 65 W TDP and 7 nm TSMC process node make it an efficient choice.

The CPU's benchmark results show it sits in the 83rd percentile against all CPUs, with an average benchmark score of 26214. Its nearest rivals include the Intel Core i9-11900KF (avgScore 26196, deltaPct 0.1), AMD Ryzen 7 PRO 6850U (avgScore 26262, deltaPct -0.2), AMD Ryzen 5 5500GT (avgScore 26161, deltaPct 0.2), and AMD Ryzen 5 7600X (avgScore 26272, deltaPct -0.2). These deltaPct values, all within 0.2%, indicate that the Ryzen 7 5700X is essentially performance-equivalent to a range of competing CPUs.

In Pc Building Simulator, the CPU's role is to feed the GPU with enough frames. The data shows that at 1080p Low, the system achieves 268.2 FPS, which is unlikely to be CPU-limited given the CPU's strong multithreaded scores (6858 in 3dmark_16_threads, 22620 in Cinebench R23 multicore). The CPU's 16 threads are more than sufficient for a simulation title, and its dual-channel DDR4 memory support with 51.2 GB/s bandwidth provides adequate data throughput.

How This Combo Ranks

This specific combination of AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4060 ranks 997th out of 1769 tested combos in Pc Building Simulator, placing it in the 44th percentile of all combinations. This middle-of-the-pack ranking reflects the GPU's 66th percentile positioning, which drags down the overall combo ranking despite the CPU's stronger 83rd percentile standing.

The ranking suggests that many other combinations deliver better Pc Building Simulator performance, likely those with higher-tier GPUs. The RTX 4060's nearest GPU rivals — the AMD Radeon RX 6600M (deltaPct -0.6), NVIDIA GeForce GTX 780 Ti (deltaPct -0.7), Intel Arc B580 (deltaPct 0.7), and AMD Radeon 760M (deltaPct 0.8) — all fall within a 1.5% performance band, meaning that swapping the GPU for any of these would yield nearly identical results.

Given the combo's rank, the data indicates that this pairing is well-matched for 1080p and 1440p gaming in Pc Building Simulator, but it is not optimized for 4K. The CPU has headroom to support a stronger GPU, as its 83rd percentile ranking suggests it is not the bottleneck. Users seeking higher 4K performance would benefit from a GPU with more VRAM and bandwidth, while those satisfied with 1080p or 1440p will find this combination delivers excellent frame rates across all settings.