Fivem

Fivem is a multiplayer modification platform that places heavy demands on both CPU and GPU, and the AMD Ryzen 7 5700X + NVIDIA GeForce RTX 4060 combination delivers a broad range of performance depending on how you configure it. The measured data shows a system that is capable of high refresh rate gaming at 1080p, but which requires careful settings management to remain fluid at higher resolutions. This analysis breaks down exactly what the numbers mean for your build.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and clearly indicates that the NVIDIA GeForce RTX 4060 becomes the dominant limiting factor as resolution increases. At Low settings, the system produces 187.4 FPS at 1920x1080, which is an excellent result for fast-paced multiplayer action. Moving to 2560x1440 drops that to 123.8 FPS, a 34% reduction, and then to 68.8 FPS at 3840x2160, which is a 44% drop from 1440p. This scaling pattern is characteristic of a GPU that is powerful enough for 1080p but begins to run out of pixel throughput at higher resolutions.

The trend is consistent across all settings presets. At High settings, the frame rate goes from 118.9 FPS at 1080p, to 78.3 FPS at 1440p, and finally to 41.7 FPS at 4K. The 4K result is below the 60 FPS threshold that most players consider playable, and it shows that this combination is not suited for native 4K gaming in Fivem. The gap between 1080p and 1440p is notable, but the gap between 1440p and 4K is even more punishing, which suggests that the RTX 4060's 8 GB of GDDR6 memory and 128-bit bus are not enough to feed the higher pixel count efficiently.

The data also reveals that the CPU is not the bottleneck at lower resolutions. At 1080p Low, the system achieves 187.4 FPS, which is a very high frame rate that requires strong single-thread performance. The AMD Ryzen 7 5700X, with its 8 cores and 16 threads based on Zen 3 architecture, is clearly able to keep up with the GPU at this resolution. However, as resolution increases, the gap between settings presets narrows in relative terms, indicating that the GPU's workload grows faster than the CPU's. For example, at 4K, the difference between Low and High is 27.1 FPS, whereas at 1080p, the difference is 68.5 FPS. This confirms that the GPU is the limiting component at 4K, while the CPU has more headroom to work with at lower resolutions.

Settings Recommendations

For players targeting high refresh rate monitors at 1920x1080, the Low preset is the clear winner. The data shows 187.4 FPS at 1080p Low, which is ideal for competitive play where every frame counts. The Medium preset is also viable at 147.4 FPS, offering a balance between visual quality and performance. High settings at 1080p still deliver a smooth 118.9 FPS, which is above the 100 FPS threshold that many players prefer. However, the Ultra preset drops to 91.7 FPS, which is still playable but may not fully utilize a 144Hz monitor.

At 2560x1440, the recommendation shifts. The Low preset provides 123.8 FPS, which is excellent for a high refresh rate 1440p display. Medium settings at 96.9 FPS are also very good, and High at 78.3 FPS is acceptable for slower-paced gameplay. The Ultra preset at 57.8 FPS is borderline, and players who prioritize smoothness should avoid it. For 4K, the situation is more constrained. Low settings at 68.8 FPS is the only preset that approaches a playable experience. Medium at 54.1 FPS and High at 41.7 FPS are both below 60 FPS, and Ultra at 32.8 FPS is not recommended for serious play.

The practical advice from the data is to use Low or Medium settings at 1080p and 1440p to maintain high frame rates. At 4K, Low is the only sensible choice, and even then, players may want to consider a resolution scale or reduce other graphical options. The measured rows show that the performance headroom is in the CPU, not the GPU, so lowering resolution is the most effective way to gain FPS.

CPU Role

The AMD Ryzen 7 5700X is a Zen 3 (Vermeer) processor with 8 cores, 16 threads, a base clock of 3.40 GHz, and a boost clock of 4.60 GHz. Its benchmark results show strong multi-threaded and single-threaded performance, which is crucial for Fivem, a game that relies heavily on CPU physics and simulation in multiplayer environments. The Cinebench R23 multicore score of 22620 and single-core score of 3193 indicate a capable processor that can handle the game's logic without becoming a bottleneck.

The 3DMark scores provide further insight. The 16-thread score of 6858 and the max-thread score of 6850 show that the CPU scales well with additional threads, but the single-thread score of 921 is more relevant for Fivem's typical workload. The CPU's percentile rank of 83 vs all CPUs means it outperforms 83% of processors, and its average benchmark score of 26214 places it in the same league as the Intel Core i9-11900KF (deltaPct 0.1) and AMD Ryzen 5 7600X (deltaPct -0.2). This indicates that the 5700X is a solid mid-range performer that should not hold back the RTX 4060 in most scenarios.

In Fivem specifically, the CPU's role is evident in the 1080p results. At 1080p Low, the system hits 187.4 FPS, which is a number that requires a strong CPU to feed the GPU. The 5700X's 32 MB shared L3 cache and 16 threads help maintain consistent frame times, even with many players on screen. The data suggests that the CPU is not the limiting factor at any resolution in this test, as the frame rate drops are consistent with a GPU-bound scenario at higher resolutions.

FAQ

Q: Can this system run Fivem at 4K smoothly?

A: No, not at higher settings. At 4K Low, the average FPS is 68.8, which is playable, but High settings drop to 41.7 FPS and Ultra to 32.8 FPS. For a consistent 60 FPS experience at 4K, players would need to lower settings or reduce the resolution.

Q: What is the best settings preset for a 144Hz 1080p monitor?

A: The Low preset at 1080p delivers 187.4 FPS, which is well above 144 Hz. Medium at 147.4 FPS also clears the threshold, and High at 118.9 FPS is close but may not fully saturate a 144Hz display. Low is the safest choice for maximum frame rates.

Q: How does the RTX 4060 compare to its nearest rivals in terms of raw score?

A: The RTX 4060 has an average benchmark score of 23181, placing it at the 66th percentile. It is 0.6% behind the AMD Radeon RX 6600M, 0.7% behind the NVIDIA GeForce GTX 780 Ti, and 0.7% ahead of the Intel Arc B580. This shows it is a mid-pack performer.

Q: Is the CPU or GPU the bottleneck at 1440p?

A: The data indicates the GPU is the bottleneck at 1440p. The frame rate drops from 123.8 FPS at Low to 78.3 FPS at High, which is a 36.7% reduction. This scaling pattern is typical of GPU-bound performance, as the CPU has enough headroom to handle the lower resolution.

Q: What is the minimum FPS at Ultra settings across all resolutions?

A: At 1080p Ultra, the average FPS is 91.7. At 1440p Ultra, it drops to 57.8, and at 4K Ultra, it falls to 32.8. These numbers suggest that Ultra settings are only viable at 1080p.

Q: Does the 5700X's 8-core configuration help in Fivem?

A: Yes, the 8 cores and 16 threads provide strong multi-threaded performance, as shown by the Cinebench R20 multicore score of 9500 and Passmark multithread score of 26612. This helps maintain frame rates in crowded multiplayer sessions, though the game does not appear to be CPU-bound in this test.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process node and features 3072 shading units, 96 TMUs, and 48 ROPs. Its boost clock is 2460 MHz, with a memory clock of 2125 MHz (17 Gbps effective) across a 128-bit bus, yielding a bandwidth of 272.0 GB/s. The 8 GB of GDDR6 memory is a key constraint at higher resolutions, as the data shows a significant performance penalty when moving to 4K.

The GPU's benchmark scores reflect its mid-range positioning. The Passmark G3D score of 19545 and the 3DMark Steel Nomad DX12 score of 2302 indicate solid DirectX 12 performance. The Geekbench OpenCL score of 101030 and Vulkan score of 98095 show that the card is well-optimized for modern APIs, which Fivem can utilize. However, the percentile rank of 66 vs all GPUs means it is behind a third of all graphics cards, and its nearest rivals include the AMD Radeon RX 6600M (deltaPct -0.6) and Intel Arc B580 (deltaPct 0.7), showing it is in a competitive but not dominant position.

In Fivem, the GPU's role becomes clear when examining the settings scaling. At 1080p, the card can push 187.4 FPS at Low, which is excellent. The jump to 1440p reduces this to 123.8 FPS, and at 4K it drops to 68.8 FPS. This 63% reduction from 1080p to 4K at Low settings is a direct result of the 128-bit memory bus and 8 GB VRAM capacity. The card's 15.11 TFLOPS of FP32 performance is sufficient for 1080p and 1440p, but the memory subsystem becomes a limitation at 4K. Players should treat the RTX 4060 as a 1080p and entry-level 1440p card for Fivem, rather than a 4K solution.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across all combinations of resolution and settings.

At 1920x1080, the system delivers its best results. The Low preset achieves 187.4 FPS, which is the highest score in the entire dataset. Medium settings produce 147.4 FPS, High settings yield 118.9 FPS, and Ultra settings drop to 91.7 FPS. This shows a clear progression where each step up in quality costs roughly 25-30 FPS, with the gap between Ultra and High being the smallest at 27.2 FPS.

At 2560x1440, the performance is still strong but noticeably lower. Low settings hit 123.8 FPS, Medium settings reach 96.9 FPS, High settings manage 78.3 FPS, and Ultra settings fall to 57.8 FPS. The relative drop from 1080p to 1440p is consistent across presets, averaging around 34-37%. The Ultra preset at 57.8 FPS is the first instance where the system dips below the 60 FPS mark, indicating that 1440p Ultra is not a viable target.

At 3840x2160, the system struggles to maintain playable frame rates. Low settings produce 68.8 FPS, Medium settings yield 54.1 FPS, High settings drop to 41.7 FPS, and Ultra settings fall to 32.8 FPS. The drop from 1440p to 4K is steep, with Low settings losing 44.4% of its frame rate. This confirms that the RTX 4060 is not designed for native 4K gaming in Fivem, and players should either lower the resolution or use a lower preset to achieve a smoother experience. The data is clear: this combination is best suited for 1080p high-refresh-rate play, with 1440p being a secondary option at medium settings.