Pc Building Simulator

Pc Building Simulator is a simulation title that behaves less like a typical GPU stress test and more like a CPU and memory-bound application, particularly at lower resolutions. The pairing of the AMD Ryzen 5 7500F with the NVIDIA GeForce RTX 3070 produces a wide performance envelope, ranging from highly playable 4K Ultra at 48.6 FPS to a staggering 301.3 FPS at 1080p Low. The data indicates that this combination excels at high refresh rate 1080p gaming, but the scaling curve reveals that the graphics card becomes the primary limiting factor as resolution increases, while the processor's strength is most visible at 1080p.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern of performance degradation as resolution increases, but the rate of that degradation is heavily influenced by the graphics preset. At the Low preset, the drop from 1920x1080 to 2560x1440 is significant, moving from 301.3 FPS down to 192.6 FPS, a reduction of roughly 36%. Pushing further to 3840x2160 at Low yields 100.8 FPS, which is about a 48% drop from the 1440p figure. This steep decline at Low settings is a strong indicator that the system is moving from a CPU-bound state at 1080p to a progressively more GPU-bound state at higher resolutions.

At the High preset, the scaling is similarly pronounced but starts from a lower baseline. The system delivers 153.7 FPS at 1080p, which drops to 94.8 FPS at 1440p (a 38% decrease), and then to 49.5 FPS at 4K (a 48% decrease from 1440p). The Ultra preset follows the same trajectory, with 143 FPS at 1080p, 91.4 FPS at 1440p, and 48.6 FPS at 4K. The fact that the High and Ultra presets produce nearly identical frame rates at 4K (49.5 vs 48.6 FPS) suggests that at this resolution, the RTX 3070's rendering throughput is the limiting factor, and the additional load from Ultra settings has minimal impact on the final frame rate.

The gap between 1080p and 4K performance is substantial across all presets. For instance, at Medium settings, the 214.3 FPS at 1080p is nearly three times the 72.6 FPS at 4K. This behavior confirms that Pc Building Simulator is not a particularly demanding title for modern hardware at lower resolutions, allowing the Ryzen 5 7500F to flex its single-thread and multi-thread capabilities. The data shows that the most efficient scaling for this specific combo is to prioritize resolution drops before making significant changes to the graphics preset, as the frame rate penalty for 4K is severe.

GPU Role

The NVIDIA GeForce RTX 3070 is equipped with 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. In the context of Pc Building Simulator, this memory configuration appears sufficient, as the game does not seem to induce a hard memory capacity limit within the measured settings. The GPU's boost clock is rated at 1725 MHz, and its 5888 shading units contribute to a peak FP32 performance of 20.31 TFLOPS. These specs position the card firmly in the upper-mid-range tier, which is reflected in its benchmark scores, such as a Passmark G3D score of 22214 and a 3DMark Steel Nomad DX12 score of 3162.

The data shows that the GPU's role changes dramatically with resolution. At 1080p Low, the system achieves 301.3 FPS, a figure that is likely beyond the refresh rate of most monitors and indicates that the CPU is the primary driver of performance. However, at 4K Ultra, the frame rate falls to 48.6 FPS, a figure that aligns with the GPU being fully saturated. The performance delta between the Low and Ultra presets at 4K is 52.2 FPS (from 100.8 to 48.6), which is a direct consequence of the increased pixel shading and memory pressure.

Relative to its peers, the RTX 3070 sits at the 72nd percentile among all GPUs. Its average benchmark score of 28238 places it slightly ahead of the AMD Radeon RX 6600 XT by 0.9% and the NVIDIA GeForce GTX 980 Ti by 1%, while trailing the AMD FirePro S7150 by 0.6%. This indicates that while the card is not a top-tier performer, it is highly competitive within its class. For this game, the GPU's 8 GB VRAM allocation is not shown to be a bottleneck, as the performance drop from 1440p High to 4K High is a linear function of pixel count, not a sudden cliff that would indicate memory overflow.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and the NVIDIA GeForce RTX 3070 achieves a rank of 800 out of 1769 tested combos for Pc Building Simulator. This places the pairing in the top half of all configurations, specifically within the 45th percentile of tested systems (calculated as 800/1769). This ranking is a composite score and suggests that while this is a capable setup, it is not an top-tier enthusiast configuration for this specific simulation title, likely due to the CPU's mid-range positioning and the GPU's previous-generation status.

The rank is influenced by the individual component strengths. The CPU's average benchmark score of 24993 places it at the 82nd percentile among all CPUs, which is a strong showing. Conversely, the GPU's average score of 28238 places it at the 72nd percentile among all GPUs. The combination of an above-average CPU with a slightly above-average GPU results in a system that can handle the game's CPU-heavy simulation aspects well, but it is not the absolute fastest pairing available. The data indicates that for players seeking top-tier performance in this game, there are 969 other combinations in the database that outperform this one, but this setup still delivers playable or highly responsive frame rates at all tested settings.

Settings Recommendations

Based strictly on the measured FPS rows, the optimal balance of visual fidelity and performance for this combo depends on the target resolution. For 4K gaming, the High preset is the recommended choice, as it delivers an average of 49.5 FPS, which is only marginally faster than the Ultra preset's 48.6 FPS but offers a smoother experience than the Medium preset's 72.6 FPS, which is still well above the 60 FPS threshold. The Low preset at 4K produces 100.8 FPS, but the visual compromise is likely too steep for a game about building PCs.

At 1440p, the Medium preset provides an excellent balance with 134.4 FPS, which is more than sufficient for high refresh rate monitors. The High preset at 94.8 FPS is also viable, but the jump from Medium to High costs roughly 40 FPS, which is a significant trade-off for potentially minor visual gains. The Ultra preset at 91.4 FPS is similarly playable but represents the point of diminishing returns.

For 1080p, the data suggests that the Ultra preset is the best experience, delivering 143 FPS while still maintaining a high level of visual detail. This frame rate is high enough to take advantage of 144Hz displays. The High preset at 153.7 FPS is also excellent, but the Ultra setting's extra visual polish comes at a negligible performance cost of only 10.7 FPS. The Low and Medium presets at 301.3 and 214.3 FPS respectively are only recommended for competitive play on high-refresh-rate (240Hz+) monitors, as they provide little visual benefit for such a massive increase in frame rate.

Measured FPS Breakdown

The measured data provides a comprehensive matrix of performance across three resolutions and four settings presets.

At 1920x1080, the system delivers:

• Low: 301.3 FPS
• Medium: 214.3 FPS
• High: 153.7 FPS
• Ultra: 143.0 FPS

At 2560x1440, the frame rates are:

• Low: 192.6 FPS
• Medium: 134.4 FPS
• High: 94.8 FPS
• Ultra: 91.4 FPS

At 3840x2160, the performance is:

• Low: 100.8 FPS
• Medium: 72.6 FPS
• High: 49.5 FPS
• Ultra: 48.6 FPS

The data shows a consistent pattern: the difference between High and Ultra settings is minimal across all resolutions, suggesting that the Ultra preset's additional effects are not particularly taxing on this hardware. The most significant performance gap is between Low and Medium, which represents the largest jump in visual quality for a relatively smaller frame rate cost (e.g., from 301.3 to 214.3 FPS at 1080p). This breakdown confirms that the RTX 3070 is capable of handling the game's highest settings at 1080p with ease, and remains playable at 4K with reduced settings.

FAQ

Q: What is the average frame rate at 1440p with High settings?

A: The measured average FPS for the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3070 at 2560x1440 with High settings is 94.8 FPS.

Q: Is 4K gaming viable with this combo?

A: Yes, but with limitations. At 4K Ultra, the average FPS is 48.6, which is below the 60 FPS threshold. At 4K High, it reaches 49.5 FPS, while dropping to Medium yields a more playable 72.6 FPS.

Q: How does this CPU compare to the AMD Ryzen 7 2700X?

A: The AMD Ryzen 5 7500F has an average benchmark score of 24993, which is 0.3% lower than the AMD Ryzen 7 2700X's score of 25057.

Q: What is the highest frame rate recorded in the data?

A: The highest average FPS is 301.3, achieved at 1920x1080 resolution with the Low settings preset.

Q: Does the GPU have enough VRAM for this game?

A: The RTX 3070 has 8 GB of GDDR6 memory. The data does not show a sudden performance collapse at 4K Ultra, indicating that the 8 GB allocation is sufficient for the game's requirements at these settings.

Q: How does this GPU rank compared to the AMD Radeon RX 6600 XT?

A: The NVIDIA GeForce RTX 3070 has an average benchmark score of 28238, which is 0.9% higher than the AMD Radeon RX 6600 XT's score of 27985.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. It features 32 MB of shared L3 cache and supports DDR5 memory with a dual-channel bus, offering a bandwidth of 83.2 GB/s. This CPU configuration is well-suited for simulation games, which often rely on single-thread performance for game logic and multi-threading for background simulation tasks.

In the measured data, the CPU's influence is most pronounced at 1080p, where the frame rates are exceptionally high. At 1080p Low, the system reaches 301.3 FPS, which is a clear indication that the GPU is not the limiting factor. The CPU's strong single-thread performance, evidenced by its Cinebench R23 single-core score of 3218 and 3DMark single-thread score of 974, allows the game's logic to be processed quickly enough to feed the GPU at these high rates. The multi-thread capabilities, shown in the Cinebench R23 multi-core score of 22799, ensure that the simulation aspects of the game do not cause stutters or frame drops.

Relative to its closest rivals, the Ryzen 5 7500F performs nearly identically to the Intel Core i7-11850H, with a delta of only 0.1% in average benchmark score. It also matches the AMD Ryzen 5 8400F and AMD Ryzen 9 6900HX within a 0.4% margin. However, the data shows that as resolution increases to 1440p and 4K, the CPU's role diminishes. The frame rate differences between the High and Ultra presets become negligible (e.g., 49.5 vs 48.6 FPS at 4K), confirming that the GPU is the sole bottleneck at higher resolutions. The CPU is strong enough to avoid bottlenecking the RTX 3070 at any setting, but its performance headroom is only fully utilized at 1080p where the frame rates exceed 140 FPS even on Ultra.