Pc Building Simulator

Pc Building Simulator is a simulation title that stresses system configuration logic more than raw graphical fidelity, yet the measured data for the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4070 SUPER combo shows a wide spread of performance across resolutions and settings. The combination of a 6-core Zen 3 processor with a 12 GB Ada Lovelace GPU produces results that range from highly playable 4K Ultra to extremely high refresh rate 1080p, with the GPU clearly becoming the limiting factor as resolution increases.

Resolution Scaling

The data reveals a classic resolution scaling curve where the RTX 4070 SUPER’s workload increases significantly as pixel count rises. At 1080p High, the combo delivers 205 FPS, but moving to 1440p High drops that to 129 FPS, a reduction of 76 FPS or roughly 37%. The jump to 4K High further reduces performance to 67 FPS, which is 138 FPS below the 1080p result. This pattern indicates that the GPU is the primary bottleneck at higher resolutions, as the CPU has more headroom to feed frames at lower pixel counts.

At Low settings, the scaling is even more pronounced because the CPU becomes more relevant. The 1080p Low result of 282 FPS is the highest measured for this combo, while 1440p Low hits 242 FPS and 4K Low reaches 135 FPS. The drop from 1080p to 1440p at Low is 40 FPS, and the drop from 1440p to 4K is 107 FPS, showing that the GPU’s rendering load dominates as resolution increases, even when graphical effects are minimized.

The Medium preset provides a middle ground with 248 FPS at 1080p, 183 FPS at 1440p, and 96 FPS at 4K. This represents a 152 FPS difference between 1080p and 4K, which is the largest absolute delta across all settings. The Ultra preset shows the smallest relative scaling because it is the most demanding; 1080p Ultra produces 195 FPS, 1440p Ultra drops to 123 FPS, and 4K Ultra falls to 64 FPS. The 131 FPS gap between 1080p and 4K at Ultra is significant but proportionally similar to High.

The limiting component analysis shifts with resolution. At 1080p, the 282 FPS Low result suggests the Ryzen 5 5600F, with its 6 cores and 12 threads boosting to 4.00 GHz, is capable of driving very high frame rates, but the GPU still manages to keep up. At 4K, the 64 FPS Ultra result and 67 FPS High result are clearly GPU-bound, as the processor’s workload per frame decreases relative to the pixel fill rate. The 4K Medium frame rate of 96 FPS with a minimum of 81 FPS indicates the GPU is working hard, but the combo remains playable.

FAQ

Q: What is the highest average FPS this combo achieves in Pc Building Simulator?

A: The highest measured average is 282 FPS at 1920x1080 with Low settings. The next best is 248 FPS at the same resolution with Medium settings.

Q: Is the combo capable of 4K gaming in this title?

A: Yes, all four settings presets are playable at 4K. The lowest result is 64 FPS at Ultra settings, while High delivers 67 FPS, Medium reaches 96 FPS, and Low hits 135 FPS.

Q: How does the RTX 4070 SUPER compare to its nearest rivals in GPU benchmarks?

A: The GPU’s average benchmark score is 43223, which places it 0.1% below the NVIDIA Quadro M6000 24 GB and 0.1% below the NVIDIA GeForce RTX 5050 Mobile. It is 0.2% behind the NVIDIA Quadro M6000 and 1% behind the NVIDIA GeForce RTX 4090 Mobile.

Q: What is the CPU’s benchmark percentile and how does it rank among processors?

A: The AMD Ryzen 5 5600F has a percentile of 85 versus all CPUs, meaning it outperforms 85% of tested processors. Its average benchmark score is 36945.

Q: Which CPU rival is closest in performance to the Ryzen 5 5600F?

A: The Intel Core Ultra 5 225 has an average score of 36938, which is a 0% delta from the Ryzen 5 5600F. The AMD Ryzen 5 5500X3D is 0.2% faster, and the AMD Ryzen AI 7 PRO 450 is 0.4% faster.

Q: What is the combo’s overall rank among tested system combinations?

A: The combo ranks 591 out of 3002 tested combinations in Pc Building Simulator, placing it in the top 20% of all combos tested.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, built on TSMC’s 7 nm process. Its base clock is 3.00 GHz with a boost clock of 4.00 GHz, and it carries 32 MB of shared L3 cache. The processor’s PassMark multithread score is 19236, with a single-thread score of 2872, and it achieves an average benchmark score of 36945, placing it at the 85th percentile versus all CPUs.

In Pc Building Simulator, the CPU’s role is most evident at lower resolutions and settings where frame rates exceed 200 FPS. The 1080p Low result of 282 FPS and 1080p Medium result of 248 FPS suggest the processor can handle high draw call volumes and simulation logic without becoming a bottleneck. The 1080p High result of 205 FPS and 1080p Ultra result of 195 FPS are also strong, indicating that the CPU maintains sufficient headroom even as the GPU workload increases.

Comparing the 5600F to its nearest rivals, the data shows it is essentially tied with the Intel Core Ultra 5 225, which has a delta of 0%. The AMD Ryzen 5 5500X3D is 0.2% faster, and the AMD Ryzen AI 7 PRO 450 is 0.4% faster. The Intel Core i9-12900T is 0.5% faster. These small deltas (all within half a percent) mean the 5600F’s gaming performance in this simulation title is highly competitive with these alternatives, and the measured FPS differences are more attributable to the GPU than the CPU.

The CPU’s 65 W TDP and 7 nm process node suggest efficient operation, but the benchmark data does not include power draw measurements. The processor supports DDR4 memory with dual-channel configuration and 51.2 GB/s bandwidth, which is sufficient for the frame rates observed. The L3 cache of 32 MB is shared across all cores, which helps with simulation workloads that benefit from shared data access.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest performance across all settings. Low settings produce 282 FPS average, Medium produces 248 FPS with a minimum of 211 and maximum of 285, High produces 205 FPS, and Ultra produces 195 FPS. The spread between Low and Ultra is 87 FPS, showing that graphical settings have a moderate impact at this resolution.

At 2560x1440, performance drops significantly but remains high. Low settings yield 242 FPS, Medium yields 183 FPS with a minimum of 155 and maximum of 210, High yields 129 FPS, and Ultra yields 123 FPS. The difference between Low and Ultra is 119 FPS, which is larger than at 1080p, indicating the GPU is becoming more stressed. The 1440p Medium minimum of 155 FPS is still well above 60 FPS, making it suitable for high refresh rate monitors.

At 3840x2160, the combo is clearly GPU-bound. Low settings produce 135 FPS, Medium produces 96 FPS with a minimum of 81 and maximum of 110, High produces 67 FPS, and Ultra produces 64 FPS. The gap between Low and Ultra is 71 FPS, which is the smallest absolute delta across resolutions, confirming that the GPU’s pixel throughput is the limiting factor. The 4K Ultra result of 64 FPS is just above the 60 FPS threshold, and 4K High is similarly close at 67 FPS.

The Medium preset consistently provides the best balance of quality and performance, with 4K Medium at 96 FPS being the standout 4K result. The minimum frame rates for Medium are 211 FPS at 1080p, 155 FPS at 1440p, and 81 FPS at 4K, all of which are playable. The Low presets offer the highest frame rates but sacrifice visual fidelity, while Ultra presets keep performance above 60 FPS at all resolutions.

How This Combo Ranks

The combo of the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4070 SUPER ranks 591 out of 3002 tested combinations in Pc Building Simulator. This places it in the top 19.7% of all combos, which is a strong showing for a mid-range processor paired with an upper-mid-range GPU. The rank reflects the balanced nature of this pairing, as neither component is severely mismatched for this simulation title.

The GPU’s individual benchmark percentile is 83 versus all GPUs, with an average score of 43223. Its nearest rivals are all within 1% of its score, including the NVIDIA Quadro M6000 24 GB (0.1% faster), NVIDIA GeForce RTX 5050 Mobile (0.1% faster), NVIDIA Quadro M6000 (0.2% faster), and NVIDIA GeForce RTX 4090 Mobile (1% faster). This clustering indicates the RTX 4070 SUPER sits in a competitive performance band.

The CPU’s percentile of 85 is slightly higher than the GPU’s, meaning the processor is relatively stronger compared to its peers than the GPU is. However, the measured FPS data shows the GPU is the bottleneck at 4K, so the CPU’s higher percentile does not translate to better scaling at high resolutions. The combo rank of 591 benefits from the CPU’s strong single-thread performance (2872 PassMark single-thread score) and the GPU’s substantial FP32 throughput of 35.48 TFLOPS.

Compared to the 3002 total combos, a rank of 591 means this pairing outperforms the majority of tested systems. The data suggests that for a simulation game like Pc Building Simulator, which may involve complex system logic and UI rendering, the 6-core CPU is sufficient, and the GPU’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth provide ample resources for high-resolution textures.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the best overall experience across all resolutions. At 1080p, Medium delivers 248 FPS with a minimum of 211 FPS, which is smooth on any high refresh rate display. At 1440p, Medium produces 183 FPS with a minimum of 155 FPS, providing excellent performance for 144Hz monitors. At 4K, Medium achieves 96 FPS with a minimum of 81 FPS, which is well above the 60 FPS target and offers a better visual experience than Low.

For users prioritizing maximum visual quality, the Ultra preset is viable at all resolutions. The 4K Ultra result of 64 FPS is playable, but it is close to the edge of comfort for demanding scenes. The 1440p Ultra result of 123 FPS is ideal for 120Hz displays, and 1080p Ultra at 195 FPS is excellent for 165Hz or 240Hz monitors. The High preset is nearly identical to Ultra in performance, with 4K High at 67 FPS and 1440p High at 129 FPS, making it a reasonable alternative if Ultra introduces any instability.

The Low preset is only recommended for competitive scenarios where maximum frame rates are required. At 1080p Low, the 282 FPS result is the highest measured, and 1440p Low at 242 FPS is also exceptional. However, at 4K Low, the 135 FPS result is high but the visual compromise is significant. For most players, Medium at 4K or High at 1440p provides the best balance of image quality and performance.

The data indicates that the RTX 4070 SUPER’s 12 GB VRAM is sufficient for this game at all settings, as no memory-related stutters or crashes are reflected in the minimum FPS values. The Medium preset’s minimum FPS values are consistently higher than the corresponding High and Ultra presets, making it the safest choice for maintaining consistent frame pacing. Given the game’s simulation nature, where system building UI and 3D previews are common, the Medium preset’s combination of 96 FPS at 4K and 248 FPS at 1080p ensures smooth interaction without unnecessary GPU load.