Pc Building Simulator

The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 4070 Ti delivers a compelling performance profile in Pc Building Simulator, offering a wide range of frame rates that scale predictably with both resolution and graphical presets. This combination ranks in the top quartile of tested systems, and the data reveals a setup where the GPU is the clear performance driver, even when paired with a mid-range CPU from an older generation.

Resolution Scaling

The measured frames per second (FPS) demonstrates a significant, yet expected, drop as resolution increases from 1920x1080 to 3840x2160. At the "High" preset, the system averages 200.5 FPS at 1080p, which falls to 134.2 FPS at 1440p, and further to 73.1 FPS at 4K. This represents a 63.5% performance reduction from 1080p to 4K, a clear indicator that pixel throughput is heavily taxing the graphics card. The scaling pattern is consistent across all settings, but the absolute difference in FPS between resolutions becomes smaller at lower presets, suggesting the GPU is less of a bottleneck when the workload is lighter.

The "Low" preset shows the most extreme scaling, starting at 260.9 FPS at 1080p and dropping to 140.6 FPS at 4K, a 46.1% decrease. This smaller percentage drop at lower settings indicates that while the GPU is still the primary limiter, the CPU (AMD Ryzen 5 3600) has more headroom to keep up with the frame generation demands at lower graphical loads. Conversely, the "Ultra" preset shows the most constrained scaling, with 193.4 FPS at 1080p falling to 70.4 FPS at 4K, a 63.6% drop. This suggests that at the highest settings, the GPU is working at its maximum capacity, and the resolution increase directly translates into a proportional reduction in frame rate. The data clearly points to the RTX 4070 Ti as the limiting component in this pairing, as the CPU's performance is sufficient to feed the GPU at all tested resolutions.

Settings Recommendations

The benchmark results indicate that the optimal balance between visual fidelity and frame rate is achieved at the "High" preset for most users, particularly those with high-refresh-rate monitors. At 1920x1080, the "High" preset delivers 200.5 FPS, which is more than sufficient for smooth gameplay and only 7.1 FPS less than the "Ultra" preset's 193.4 FPS. The difference between "High" and "Ultra" is a modest 3.5% performance cost, but the data suggests that "High" provides a more stable platform for competitive play where higher frame rates are preferable.

At 2560x1440, the "High" preset again proves to be the sweet spot, offering 134.2 FPS, which is above the 120 FPS threshold often sought for a premium experience. Moving to "Medium" increases the frame rate to 192.4 FPS, but this comes at the cost of visual quality. The "Ultra" preset at 1440p drops to 128.7 FPS, which is still playable, but the margin over "High" is only 5.5 FPS, making "High" the more efficient choice. For 4K gaming, the "High" preset is the only viable option for a consistently smooth experience, with 73.1 FPS. The "Ultra" preset at 4K yields 70.4 FPS, which is only a 3.7% difference, but both are below the 75 FPS mark. The "Low" preset at 4K provides 140.6 FPS but drastically reduces visual fidelity, making it a poor trade-off. The data suggests that "High" is the recommended preset for this combination, as it offers the best balance of image quality and performance across all resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is the dominant component in this pairing, and its specifications directly correlate with the measured performance. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, providing a memory bandwidth of 504.2 GB/s. This substantial bandwidth is crucial for handling the high-resolution textures and complex scenes typical of a simulation game like Pc Building Simulator. The 4K "Ultra" preset, which likely demands the most memory and bandwidth, still averages 70.4 FPS, indicating that the 12 GB capacity and 504.2 GB/s bandwidth are sufficient to avoid catastrophic frame drops.

The GPU's clock speeds also play a significant role. With a base clock of 2310 MHz and a boost clock of 2610 MHz, the RTX 4070 Ti is able to sustain high throughput, which is reflected in the strong 1080p "Low" preset performance of 260.9 FPS. This indicates that the GPU's raw compute power, harnessed through its 7680 shading units, is more than capable of handling the game's demands when not constrained by resolution. The data shows that the GPU is not the limiting factor at lower resolutions, but at 4K, its performance ceiling is reached, as evidenced by the sub-75 FPS results on the "High" and "Ultra" presets. The GPU's overall benchmark score of 44900 and its 85th percentile ranking among all GPUs further solidify its position as a high-end part that can easily handle this title.

How This Combo Ranks

The AMD Ryzen 5 3600 and NVIDIA GeForce RTX 4070 Ti combination ranks 394th out of 1769 tested combos in Pc Building Simulator, placing it in the top 22.3% of all systems. This is a strong result, especially considering the CPU's relative age. The CPU itself has an average benchmark score of 18129 and ranks in the 76th percentile of all CPUs, which is respectable but not top-tier. The data shows that the GPU's high performance is what boosts this combo in the rankings.

When looking at the CPU's nearest rivals, its score is nearly identical to the Intel Core i5-11400 (deltaPct of -0.1%) and slightly worse than the AMD Ryzen 5 7535HS (deltaPct of 0.2%). This indicates that the Ryzen 5 3600 is not a bottleneck in this system, as its performance is on par with other mid-range options. The GPU's nearest rivals include the NVIDIA GeForce RTX 5090 Mobile (deltaPct of -0.6%), which is slightly faster, and the AMD Radeon Pro 580 (deltaPct of 1.6%), which is slower. This suggests that the RTX 4070 Ti is performing as expected for its class. The combination's high rank confirms the GPU's ability to compensate for the CPU's limitations, resulting in a system that is well-balanced for this specific game.

FAQ

Q: What is the average FPS at 1440p with the "High" preset?

A: The average FPS at 2560x1440 with the "High" preset is 134.2 FPS.

Q: Is the CPU or GPU the main bottleneck in this game?

A: The data indicates the GPU is the limiting factor, as frame rates drop significantly with resolution increases, while the CPU's performance is sufficient to keep up even at 1080p "Low" settings where 260.9 FPS is achieved.

Q: How does the "Ultra" preset compare to "High" at 4K?

A: At 3840x2160, the "Ultra" preset averages 70.4 FPS, which is only 2.7 FPS less than the "High" preset's 73.1 FPS, a negligible 3.7% difference.

Q: What is the best resolution to use for high-refresh-rate gaming?

A: For monitors with refresh rates above 144 Hz, the 1920x1080 resolution with the "High" preset is recommended, as it delivers 200.5 FPS, providing ample headroom above the monitor's refresh rate.

Q: Does the 12 GB of VRAM on the RTX 4070 Ti cause any issues?

A: No, the data does not indicate any VRAM-related performance issues. The 4K "Ultra" preset still achieves 70.4 FPS, suggesting that the 12 GB capacity and 504.2 GB/s bandwidth are adequate for this game's demands.

Q: How well does this combo perform relative to other tested systems?

A: This specific combination ranks 394th out of 1769 tested combos, placing it in the top 22.3% of all systems tested for Pc Building Simulator.

Measured FPS Breakdown

The following table outlines the exact average FPS values measured for each resolution and settings preset.

| Resolution | Settings | Average FPS |

|:--------- |:------- |:---------- |

| 3840x2160 | High | 73.1 |

| 3840x2160 | Low | 140.6 |

| 3840x2160 | Medium | 99.8 |

| 3840x2160 | Ultra | 70.4 |

| 2560x1440 | High | 134.2 |

| 2560x1440 | Low | 223.4 |

| 2560x1440 | Medium | 192.4 |

| 2560x1440 | Ultra | 128.7 |

| 1920x1080 | High | 200.5 |

| 1920x1080 | Low | 260.9 |

| 1920x1080 | Medium | 228.9 |

| 1920x1080 | Ultra | 193.4 |

The data shows a clear and consistent hierarchy. The "Low" preset always yields the highest frame rates, followed by "Medium," "High," and finally "Ultra." The gap between "Low" and "Ultra" at 1080p is 67.5 FPS, which narrows to 70.2 FPS at 4K. This pattern reinforces that the GPU's workload scales with settings, and the performance differences are more pronounced at lower resolutions where the GPU is less saturated. The "Medium" preset at 1440p, with 192.4 FPS, offers a compelling middle ground for users who prioritize frame rate over maximum visual detail. Overall, the measured data provides a comprehensive view of this combo's capabilities, showing it is capable of high-refresh-rate gaming at 1080p and 1440p, and solid 4K performance on "High" settings.